The Hakko PD-03-D manual desoldering tool provides a low cost and effective method for removal of residual solder during desoldering operations. With the press of a button, the spring activated vacuum system sucks the molten solder into the collection chamber, which is easily accessible for removal of solder and cleaning.
The PD-03-D is made of ESD Safe resins.
The J−HARW−1 Hot Air Rework Station can be used for rework and soldering operations on a broad range of components as well as for heat shrinking, drying, paint removal, conformal coating removal, pre−heating, defrosting, glue soldering, and much, much more. This unit is especially suited for rework operations on in−line sockets.
Technical Parameters:
Rated Voltage Range: 110V to 127VAC, 60Hz
Rated Power: 700W
Display Type: LED Nixie Tube
Temperature Range: 212 to 896 F ( 100
Operating Ambient Temperature: 32 to 480 C) to 104 F (0 to 40
Air Delivery: Brushless Motor with Smooth Air Delivery
Air Volume: 120L Min. C)
Main Unit Dimensions: 6.693 (170mm) L x 3.740 (95mm) W x 5.118 (130mm) H
Features:
Adjustable Temperature
C or F Selectable Temperature Display
Air Volume Adjustment Knob
LED Display Tubes
Standby Mode .197 (5mm)
Smart Technology Places Unit in Cool Down Mode when Heat gun is Placed back in Holder
Includes 3 Different Size Nozzles
ESD Safe
Rapid Heat−Up
Replaces Hakko 472D
The HAKKO FR‐410 Desoldering Station is designed to fit that need and bridge the gap in power between the 70W HAKKO FM‐204 Desoldering Station, and the 300W HAKKO FR‐400 Ultra Heavy Duty Desoldering Station.
The HAKKO FR‐410 provides 140W of power and has the widest selection of nozzle configurations that can meet almost every need. The station also includes the same popular features from the HAKKO FR‐400 which include an anti‐clogging feature which helps ensure instantaneous application of peak vacuum pressure to the solder joint, a delay timer to prevent premature release of the vacuum system before solder has cleared the heater and is captured in the solder collection chamber, a large, easy to read display that includes a vacuum level indicator to let you know if there are restrictions building that will need to be cleaned out, 3 user programmable presets, and process control password lockout to prevent any unauthorized changes to the systems operation or setup.
HAKKO FR-872 4-Bank IR Preheater provides a fast and efficient method of preheating large and small PCB assemblies while still on the workbench but in a very controlled fashion. This preheater uses a new high efficiency carbon filament IR heating lamp that nearly eliminates the visible spectrum while maintaining a very high output in the infrared spectrum with minimal shadowing, allowing for a very even preheating of the PCB.
The HAKKO FR-872 has the same operation as the smaller HAKKO FR-870 but has 4 switchable zones of preheating compared to just 2.and both manual and automatic modes of operation using either a thermocouple for closed-loop feedback of the PCB heating, or using power settings of the heaters.
A new feature that has been added for the HAKKO FR-872 is the Ramp Control. This new feature allows you to control the ramp rate of the PCB when using either of the thermocouple modes of temperature control. The feature allows you to select ramp rates of 1, 2, or 3 degrees Celsius per second. Settings of the preheater can be locked out using a password to prevent inadvertent changes that could affect the process.
As with the HAKKO FR-870, the new HAKKO FR-872 allows for automatic operation following a 3-heating zone profile that can be programmed into the system. A total of 10 profiles can be stored for each mode of operation, for a total of 20 possible profiles. The HAKKO FR-872 also integrates for start/stop operation to work in conjunction with the hot air rework profiles programmable into the HAKKO FM-206 or HAKKO FR-803B (integration requires an optional connection cable that is not included).
Hakko FM2024-21 Desoldering Module Conversion Kit features:
The Hakko FM-2024 Desoldering Module extends the versatility of the award winning Hakko FM-202 or thenew FM-203 Soldering Station giving you a complete soldering and desoldering solution, in one modular station.
Building on Hakko’s revolutionary composite tip technology, the desoldering nozzle/tip heater cartridge assembly offers a one-step, quick-change design with fast thermal recovery; the enlarged throat and shortened nozzle design is virtually non-cloggable, making it ideal for NO LEAD applications; and its slender body enables it to reach those difficult-to-reach component pads on densely populated boards.
The Hakko FM-2024 also features an extremely lightweight, reconfigurable handpiece that allows the user the option to use the tool as either a gun or pencil style handpiece by simply removing or adding the Handle.
Included:
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
The Hakko FM-205 Digital Desoldering Tool is very similar to the Hakko FM-204 except that it uses compressed air to generate the vacuum rather than an internal pump. This provides for slightly higher vacuum pressure, increased suction flow, and a lower station cost.
Included:
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
The Hakko FM-204-01 ESD Solder/Desolder Station with FM2024-02 Desoldering Tool is a “self-contained” desoldering station offers dual functionality for both soldering and desoldering in one station in a single-port station.
Included:
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
compatible with LEAD-FREE solder
The Hakko 485 Rework System ESD 850W with Shop Air Unit is a compact, high-performance soldering system developed exclusively for soldering and desoldering components and connectors mounted on PC boards.
Hakko 485 850W Rework System with Shop Air Unit features:
NOTE: Due to the increased use of lead free and other solder compositions, the 485 is shipped with an empty solder pot, saving time and effort for the end-user.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Free Ground Shipping!
Hakko FM206-DSA configuration:
FM-206 Rework Station with FM-2024-42 desoldering Iron, FM-2029-01 micro hot air pencil, and FM-2027-06 Soldering Iron and three stands.
The Hakko FM-206 3-Port Rework Station can power any Hakko FM Series handpiece, thus offering the ability for you to tailor the station to fit your specific rework needs. The station’s sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station.
• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design
NOTE: Tips and Nozzles are NOT included with station or any configuration
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
Free Ground Shipping!
FM206-STA configuration:
FM-206 Rework Station with FM-2022 Parallel Remover, FM-2029 Hot Air Handpiece, and FM-2027 Soldering Iron.
The Hakko FM-206 3-Port Rework Station can power any Hakko FM Series handpiece, thus offering the ability for you to tailor the station to fit your specific rework needs. The station’s sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station.
• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design
NOTE: Tips and Nozzles are NOT included with station or any configuration
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
A specially engineered high vacuum desolder pump made to exacting specifications, ESD safe and providing precise repeatable operation.
This ESD Safe desoldering pump is fitted with a Teflon Tip and is 13″ long including tip. Durable corrosion resistant plastic construction. Precision metal plunger. Corrosion treated springs. Insulated vacuum pulse. Regulated return (1 millisecond ±30%). Uniform reset pressure (11in. lbs. ±20%). Cushioned shock reduction (pulse release to minimize board damage).
FEATURES:
FREE GROUND SHIPPING!
FM-206 Desoldering Rework Station with FM-2022 Tweezer, FM-2024 Desoldering and FM-2027 Soldering Irons
Hakko FM206-DTS Features:
The Hakko FM-206 3-Port Rework Station can power any Hakko FM Series handpiece, thus offering the ability for you to tailor the station to fit your specific rework needs. The station’s sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station.
• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design
• NOTE: Tips and Nozzles are NOT included with station or any configuration. Must order separately.
The Hakko FM206-DTS configuration contains:
(1) FM-2024 desoldering tool (FM2024-42 Kit) Order N3 nozzles here
(1) FM-2022 Parallel Remover (FM2022-05 Kit)
(1) FM-2027 soldering iron (FM2027-06 Kit) Order T15 tips here
• FM206-55 station is included.
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
FREE UPS GROUND SHIPPING
The Hakko FM206-DSS configuration contains:
(1) FM-2024 desoldering tool (FM2024-42 Kit)
(2) FM-2027 soldering irons (FM2027-06 Kit)
• FM206-55 station is included.
The Hakko FM-206 3-Port Rework Station can power any Hakko FM Series handpiece, thus offering the ability for you to tailor the station to fit your specific rework needs. The station’s sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station.
• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design
NOTE: Tips and Nozzles are NOT included with station or any configuration
Click here for N3 nozzles for the included FM2024 Desoldering Tool
Click here for T15 tips for the included FM2027 Soldering Irons
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
FREE UPS GROUND SHIPPING
The Hakko FM-204 Desoldering & Soldering Station is a “Self-Contained” Desoldering Station/Rework Tool with all the Soldering Functionality of the FM-203 in a Single-Port Station.
Nozzles are NOT included
Note: The FM-204 and FM204-CP (Conversion Port) are “SINGLE PORT” stations, meaning, ONLY ONE HANDPIECE can be used at a time. (You cannot use the soldering handpiece and desoldering handpiece at the same time.)
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.
FREE UPS GROUND SHIPPING
The Hakko FR-830 is a compact and low cost solution to preheating printed circuit boards. The design of the FR-830 delivers consistent heat to the bottom of printed circuit boards and is particularly beneficial when soldering lead-free assemblies.
The integrated self-resetting overheat protection, high pressure fan, and convex outlet reduces heat buildup and prevents blockage of the outlet, and the angled heater tube protects the heating element from damage caused by debris that may accidentally drop inside the heater opening.
Closed loop temperature control allows the output air temperature to be set anywhere between 150° – 300°C (302° – 572°) and an optional Extension Pipe (B3263) extends the airflow an additional 27mm (1.1 inch).
The FR-830 also has a port that allows it to be activated by an optional hand switch (B2763) or foot switch (B1649).
Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.