Pelican 1490 Protector Laptop Case

1500 PELICAN

PELICAN 1490 BLACK PROTECTOR LAPTOP CASE

Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

  • Fits notebook computers up to 17.3″ L x 11.0″ W x 3.3″ D (43.94 x 27.94 x 8.38 cm)
  • Double safety locking latches with keys
  • Pick N Pluck™ with convoluted lid foam
  • Open cell core with solid wall design – strong, light weight
  • Comfortable rubber over-molded handle
  • Automatic pressure equalization valve – balances interior pressure, keeps water out
  • O-ring seal
  • Stainless steel hardware
  • Personalized nameplate service available
  • Lifetime Guarantee of Excellence
DIMENSIONS
Interior (L×W×D)
17.75 x 11.37 x 4.12 in (45.1 x 28.9 x 10.5 cm)
Exterior (L×W×D)
19.87 x 13.93 x 4.68 in (50.5 x 35.4 x 11.9 cm)
MEASUREMENTS
Lid Depth
1.50″ (3.8 cm)
Bottom Depth
2.62″ (6.7 cm)
Total Depth
4.12″ (10.5 cm)
Int Volume
0.48 ft³ (0.014 m³)
Padlock Hole Diameter
0.25″ (0.6 cm)
WEIGHTS
Weight With Foam
6.50 lbs (2.9 kg)
Weight Empty
5.47 lbs (2.5 kg)
Buoyancy
41.00 lbs (18.6 kg)
MATERIALS
Body Material
ABS
Latch Material
ABS
O-Ring Material
Polymer
Pins Material
Stainless Steel
Foam Material
1.3 lb Polyurethane
Purge Body Material
ABS
Purge Vent Material
3 Micron Hydrophobic Non-Woven
TEMPERATURES
Minimum Temperature
-40° F (-40 ° C)
Maximum Temperature
210° F (99 ° C)


Pelican 1506TSA TSA Lock

1506TSA PELICAN

PELICAN 1506TSA TSA LOCK

The Pelican 1506TSA Lock is a 3 digit combination lock that is TSA approved. This allows the checked luggage to remain protected, because the TSA baggage screeners have special codes and tools which will unlock it. They relock the bag after inspection. While designed for Pelican cases, this lock obviously will work with many other cases. It has a stainless steel hasp that does not corrode.

– Three digit combination lock
– TSA (Transport Security Administration) approved
– Works with TSA Pass Key for worry free travel
– Stainless steel hasp that does not corrode
– Compatible with all Pelican cases


Pelican 1520 Medium Protector Case

1520 PELICAN

PELICAN 1520 MEDIUM PROTECTOR CASE

Pelican 1520 Medium Protector Case with Pick N Pluck Foam Interior is Watertight, Crushproof, Dustproof and Guaranteed for Life. Carrying Case with easy open Double Throw latches. The Pick N Pluck Foam allows you to create custom foam cushioning without cutting. Conforms to items in all directions. Easily pull out perforated foam squares to match product’s shape.

Interior Dimensions: 18.06 x 12.89 x 6.72 in.
Exterior Dimensions: 19.78 x 15.77 x 7.41 in.
Base & Lid Dimensions: Base: 4.93 in. | Lid: 1.79 in.
Weight: 9.35 Lbs.
Wheels: No Wheels



Pelican 1550 Protector Case

1550 PELICAN

PELICAN 1550 BLACK PROTECTOR CASE

  • Watertight, crushproof, and dustproof
  • 2 level Pick N Pluck™ with convoluted lid foam
  • Open cell core with solid wall design – strong, light weight
  • Comfortable rubber over-molded handle
  • Easy open double-throw latches
  • Stainless steel hardware and padlock protectors
  • Automatic pressure equalization valve – balances interior pressure, keeps water out
  • O-ring seal
  • Personalized nameplate service available
  • Lifetime Guarantee of Excellence
DIMENSIONS
Interior (L×W×D)
18.63 x 14.18 x 7.72 in (47.3 x 36 x 19.6 cm)
Exterior (L×W×D)
20.66 x 17.20 x 8.40 in (52.5 x 43.7 x 21.3 cm)
MEASUREMENTS
Lid Depth
1.75″ (4.4 cm)
Bottom Depth
5.87″ (14.9 cm)
Total Depth
7.62″ (19.4 cm)
Int Volume
1.18 ft³ (0.033 m³)
Padlock Hole Diameter
0.31″ (0.8 cm)
WEIGHTS
Weight With Foam
11.90 lbs (5.4 kg)
Weight Empty
10.58 lbs (4.8 kg)
Buoyancy
69.89 lbs (31.7 kg)
MATERIALS
Body Material
Polypropylene
Latch Material
ABS
O-Ring Material
Polymer
Pins Material
Stainless Steel
Foam Material
1.3 lb Polyurethane
Purge Body Material
ABS
Purge Vent Material
3 Micron Hydrophobic Non-Woven


Pelican 1690 Transport Case

1690 PELICAN

PELICAN 1690 PROTECTIVE TRANSPORT CASE

Protective transport cases have rugged exteriors to protect against falls and impacts, and big interiors for moving large quantities of items or bulky, heavy equipment. Their large size is conducive for shipping on truck beds or in airplane cargo holds.

Standard Protective Transport Cases

Standard protective cases store, ship, and carry large products and items.


Pelican 2315 Flashlight

The hazard horizon is bright. With Class I, II, III – Division 1 and IECEx ia Safety Certification, 115 lumens and 75 meters of spot beam distance, the Pelican™ 2315 flashlight stretches light across dark, hazardous environments without being a source of ignition.

Engineered with an aluminum core and ABS overmolded plastic, these flashlights are built for rough handling and can survive hard drops. Plus, the sturdy clip attaches to a work vest for fast access and the tail switch activates raw LED power, even when using heavy-duty work gloves.

Pelican™ 2315 – SEE THE LIGHT AT THE END OF THE TUNNEL

  • Class I, II, III – Division 1 / IECEx ia Safety Certified
  • IPX8 1m waterproof
  • Full / Momentary Activation Tail Switch
  • 2 AA Batteries (included)
  • Integrated Clip
  • Helmet mount (included)
  • Built Pelican tough

Measurements

Length – 6.22″ (15.8 cm)

Weight

Weight With Batteries – 4.6 oz (130.41 g)
Weight No Batteries – 2.8 oz (79.38 g)

Switches

Light Modes – High
Switch Type – Momentary Push Button
Power
Rechargeable – no
Battery Quantity – 2
Battery Size – AA
Batteries Included – yes
Volts – 3.0 v
Battery Type – Alkaline

Light Specs

Lamp Type – LED

Materials

Body Material – ABS
Shroud Material – ABS
Lens Material – PC
Clip Material – ABS
O Ring Material – NBR


Pelican 2410PL StealthLite™ Flashlight

Pelican 2410PL Photoluminescent Flashlight

Pelican 2410PL StealthLite™ Flashlight

Same features as the StealthLite™ 2410 LED Flashlight, but outfitted with a lens ring that emits a bright glow in the dark. The new generation photoluminescent material in the plastic absorbs the energy from any light source – fluorescent lights, the sun, or even the flashlight’s own beam. No more fumbling in the dark for your flashlight. It is powered by 4 AA alkaline cells (included), submersible, and has an ELX body which resists chemicals, corrosion, and extreme temperatures.

  • 183 Lumens
  • Built Pelican tough
  • Glow-in-the-dark shroud
  • Super bright LED beam
  • NOW WITH NEW UPGRADED SPECS
  • Unconditional Lifetime Guarantee of Excellence
  • Waterproof
  • As bright as a Xenon light with the battery life of an LED

SPECS

 Download
MEASUREMENTS
Length
7″ (17.8 cm)
WEIGHTS
Weight With Batteries
7.3 oz (207 gr)
Weight Without Batteries
3.7 oz (105 gr)
SWITCHES
Switch Type
One-handed Safety Switch
Light Modes
On / Off
POWERS
Battery Size
AA
Battery Type
Alkaline
Battery Quantity
4
Batteries Included
yes
Volts
6.0 v
MATERIALS
Body Material
EXL
O-Ring Material
Ethylene Propylene
Lens Material
Polycarbonate (PC)
Shroud Material
Photo luminescent Polycarbonate (PC)
Contact Spring Retainer Material
Stainless Steel / Phosphor Bronze
OTHERS
Submersible
yes
APPROVALS
Certifications

Class I, Division 1   /  Class II, Division 1   /  Class III, Division 1   /  IECEx ia

LIGHT SPECS
Lamp Type

LED

ANSI STANDARDSLearn more

FL1 STANDARD HIGH
light output 183
LUMENS
run time 5h 45mins
beam distance 184m
peak beam intensity 8480cd
waterproof water resistance IPX7

Pelican 2410 StealthLite™ Flashlight



Pelican 2785 Headlamp

At long last, a high performance / long run time safety certified headlamp! The Class I, Division 1 / IECEx certified 2785 provides a Main, Downcast, Flashing, and combination LED modes. The focused Main LED provides a great distance beam while the Downcast LED projects a dispersed beam set at a 45° downward angle. This “Downcast” beam offers a number of benefits including safer illuminated pathways, reading capability, as well as convenient face to face applications. Options are plentiful as each mode is provided in an easy to select high, medium or low setting. The rear mounted battery pack is equipped with a full time battery level indicator in addition to a rear facing red LED for added safety. With over 200 lumens of high intensity light output available, coupled with the ability to last up to 100 hours in the low setting, the 2785 will support virtually all your hands free lighting needs. All this in a product that carries intrinsically safe certifications.

  • Dual Beams including Downcast LED Technology
  • 3 Light Levels
  • Pivoting Head For Directional Beam (60°)
  • Full Time Battery Level Indication
  • Rear Mounted Red LED
  • Cloth and Rubber Straps Included
  • 4 AA Batteries Included

Measurements

Length

3.00″ (7.6 cm)

Weight

Weight With Batteries – 8.8 oz (249.48 g)
Weight No Batteries – 6.6 oz (187.11 g)

Switches

Light Modes – High / Medium / Low / Downcast / Spot / Flashing
Switch Type – Rotary / Push Button

Power

Rechargeable – no
Battery Quantity – 4
Battery Size – AA
Batteries Included – yes
Volts – 6.0 v
Battery Type – Alkaline
Battery Level Indicator – 3 Blue LEDs

Light Specs

Lamp Type – LED

Materials

Body Material – Polycarbonate (PC)
Shroud Material – Polycarbonate (PC)
Lens Material – Polycarbonate (PC)
O Ring Material – Gasket

Other

Lamp Secondary Type – LED