Jonard Tools JIC-375 Fiber Optic Stripper, Three Hole

The Jonard Tools JIC-375 Three Hole Fiber Optic Stripper performs all common fiber stripping functions. This fiber optic stripper features the following:

Strips the 1.6 mm-3.0 mm fiber cable jacket, 600-900 micron buffer coating, and 250 micron acrylate coating to expose the 125 micron glass fiber
First hole strips the 1.6 mm-3.0 mm jacket exposing the optical fiber and Kevlar strength members
Second hole strips the buffer coating, exposing the acrylate coating on the optical fiber
Third hole strips the acrylate coating exposing the glass fiber without nicking or scratching the fiber
Angled jaw guides fiber into the 3rd hole to prevent accidental cutting of the fiber
Safety lock allows the tool to be easily stored when not in use
Tool is made of strong high carbon steel and handle is made of TPR (thermoplastic rubber) for high durability and greater comfort

Jonard Tools JIC-175 Ergonomic Fiber Optic Stripper, 250 micron

The Jonard Tools JIC-175 Ergonomic Fiber Optic Stripper is made with preset factory settings and no adjustments required. This fiber optic stripper is designed to strip 250 micrometer buffer coating to expose the 125micrometer optical fiber in fiber optic cables. This fiber optic stripper features the following:

Unique design strips 250-micron buffer to expose 125-micron optical fiber without damaging the fiber
Blades are ground and hardened for higher durability and longer life
Ergonomic thermoplastic rubber (TPR) handles are comfortable and easy to use

Jonard Tools FDC-66 Fiber Scraps Disposal Can

The Fiber Scraps Disposal Can allows safe disposal of cleaved fiber ends. The disposal can features the following:

Twist lock cover locks scraps in the disposal can for safe and easy disposal
Disposal can has a 2 oz capacity with a paperboard body and plastic top and bottom
Lightweight design to accommodate any tool kit or splice/connector station

Jonard Tools FCC-250 Fiber Connector Cleaner, 2.5 mm

Featuring a patented 360 rotational tip for extra-wide cleaning, the FCC-250 Fiber Connector Cleaner provides exceptional cleaning performance on 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, and ST connectors. This fiber connector cleaner features the following:

Slide-Guide non-slip micro tape feeder guarantees consistent cleaning
Dual rotational tip and one-push operation makes cleaning ferrule end-faces quick and easy
Flip-open cap makes it easy to insert connectors for cleaning
Can be used for over 800 cleanings and has a visual indicator to see how much cleaning material is left
Static-free housing and cleaning cloth make this tool perfect for ESD-safe work
Great for many applications (satellite communication systems, military and civilian maritime optical networks, aviation, broadcasting and HDTV, fiber to the antenna for WiMax and cellular networks, outside plant and fiber to the home, cable television head end, data centers, telecom central offices) and crush resistant to over 250N, impact resistant to survive drops over 1.5M
Jonard cleaners meet or exceed all current and emerging standards for fiber cleanliness in high power laser applications (Telcordia GR-2923-CORE, iNEMI, IEC 61300-3-35, Cisco EDCS 7027180)

Jonard Tools FPL-5050 Fiber Power Meter & Optical Light Source Kit

This tool kit provides everything you need to measure power and provide a stable light source for fiber optic cable testing. The FPL-5050 Fiber Power Meter & Optical Light Source Kit (-50 to 26 dBm, single-mode) includes:

The FPM-50A Fiber Optic Power Meter to measure wavelengths from 800-1650 nm, with a mere 0.01 dB resolution
- Measures 6 preset calibrated wavelengths with high precision to determine absolute or relative power
- Includes FC/SC adapters for APC/PC/UPC connectors and an LC adapter for PC/UPC connectors only
The FLS-50 Fiber Optic Light Source to provide either 1310 nm or 1550 nm wavelengths for a stable light source for single-mode fiber measurements
- Has four different modulation outputs (CW, 270 Hz, 1 kHz, 2 kHz) at 1310 nm and 1550 nm wavelengths
- Includes FC, SC, and LC adapters to directly connect to UPC/PC FC, SC, and LC fiber connectors
A FREE BAG! The H-22 Rugged Carrying Case with Straps ($35 value)!
Nylon Carry Case (FPM-50A)
Protective Cover (FPM-50A)
Storage Pouch (FLS-50)
With both the FPM-50A and FLS-50
- Instruction Manuals
- (3) AA Batteries each (required for operation)
- (2) Cleaning Swabs each
- FC Adapter, LC Adapter, and SC Adapters

Set variation:

Model: Fiber Power Meter & Optical Light Source Kit (-50 to 26 dBm, single-mode)

Jonard Tools FLS-50 Optical Light Source with FC/LC/SC Adapters for PC/UPC Connectors

Designed to provide either 1310 nm or 1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for single mode fiber measurements. This optical light source features the following:

Includes FC, SC, and LC adapters to directly connect to UPC/PC FC, SC, and LC fiber connectors
Highly stable output power and wavelengths
Has four different modulation outputs (CW, 270 Hz, 1 kHz, 2 kHz) at 1310 N-m and 1550 nm wavelengths
Flush button design makes it easy to use and prevents dust from entering the unit
Shatter-resistant sleeve protects the light source from falls or other damage
Backlit LCD screen provides a clear display, ideal for dark places

Includes:

Fiber Optic Light Source
FC Adapter
LC Adapter
SC Adapter
(2) Cleaning Swabs
(3) AA Batteries (required for operation)
Storage Pouch

Fiber Type

Fiber Type: Single-mode

Specifications

Connector Types	1.25 mm LC and 2.5 mm FC/SC
Wavelengths (nm)	1310, 1550
Typical Output Power	-7 dBm
Output Stability	± 0.05 dB / 15 min or ± 0.1 dB / 8 hr
Operating Temperature	-10 ± 60°C
Spectral Width	≤ 10 nm
Modulation Frequencies	CW / 270 Hz / 1 kHz / 2 kHz
Battery Type	(3) AA 1.5V alkaline batteries
Storage Temperature	-25 ± 70°C
Dimensions	7″ x 3 3/16″ x 1 1/4″ (17.78 cm x 8.10 cm x 3.18 cm)
Weight	0.902 lb (409 g)

Jonard Tools FPM-50A Fiber Optic Power Meter FC/SC/LC

The Jonard Tools Fiber Optic Power Meter is perfect for measuring both the absolute optical power and relative power loss in fiber optic cables. This power meter features the following:

Measures a wide variety of wavelengths from 800-1650 nm, with a mere 0.01 dB resolution
Measures 6 preset calibrated wavelengths with high precision to determine absolute or relative power
Special function of the unit allows the device to be manually calibrated as needed
LED screen is backlit for viewing in low light locations and a 10 minute auto-off helps preserve battery life
Dust-proof button design and shatter-resistant sleeve protect the tool to last a lifetime
Comes with FC, SC, and LC adapters so that fiber connectors can be directly connected to the tool
- The FC/SC adapters are for APC/PC/UPC connectors
- The LC adapter is for PC/UPC connectors only

Includes:

Fiber Optic Power Meter
Instruction Manual
Protective Cover
(3) AA Batteries (required for operation)
(2) Cleaning Swabs
FC Adapter
LC Adapter
SC Adapter
Nylon Carry Case

Measurement Range

Measurement Range: -50 dBm to 26 dBm

Included Adapters: FC, SC, LC

Specifications

Connector Types	FC, SC (APC/PC/UPC) & LC (PC/UPC)
Calibrated Wavelengths (nm)	850, 980, 1300, 1310, 1490, 1550, 1625, 1650
Detector Type	InGaAs
Measurement Range	-50 dBm to 26 dBm
Single Mode Range	850, 980, 1300, 1310, 1490, 1550, 1625, 1650 nm, ≤ ± 0.25 dB
Multi Mode Range	850, 1300 nm, ≤ ± 0.8 dB
Resolution	0.01 dB
Operating Time	≥ 130 hours
Battery Type	(3) AA batteries
Dimensions	7″ x 3.25″ x 1.5″ (17.78 cm x 8.26 cm x 2.54 cm)
Weight	1.50 lb (680 g)

Eclipse MT-7509 Visual Fault Locator for LC Fiber Connectors

Eclipse MT-7509 Visual Fault Locator for LC Connectors

The Eclipse MT-7509 Fiber Optic Laser Tester is a light source used to locate breaks and misconnections in fiber optic cables. It is an ideal instrument to find the broken or bent patch cords, especially in fiber identification among ribbon or bunched optic fiber pigtails during the installation, in which identifying fiber from end to end may be troublesome or time-consuming. It as a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

The MT-7509 projects a highly visible red light into a fiber optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. Equipped with a high-power, extra long-life, 635nm Class III A laser diode, it operates in a Continuous mode. Any breaks will be seen as a conspicuously glowing red light point.

Simple, versatile, and user-friendly design
Rugged, compact, and splash proof copper housing
Three operation modes available: “CW” (Continuous wave output), “Pulse” and “Off” modes
Continuous wave output mode (CW) for steady fault illumination
Pulse mode helps to locate faults under high ambient light conditions
Supports LC 1.25mm connectors
The button switch permits easy one handed operation
Handy, pocket pen design
2 AAA-size alkaline batteries provide 50 hours of continuous operation

Light Source Class III A Laser Diode
Central Wave Length 635nm/±10nm
Connector Interface 1.25mm; LC only
Peak Power Output > 0.5mW
Operating Temperature 0 ~ 40°C
Storage Temperature 20 ~ 60°C
Dimensions Length: 6″
Diameter: .5″
Batteries 2 AAA (Not included)

VFL

Jonard Tools TK-400 Splicer’s Kit

Jonard Tools TK-400 Splicer’s Kit

This compact kit contains a special purpose ergonomic cable splicer’s knife, scissor and leather pouch. The knife features a short 1 3/4″ tough, cutlery-steel blade and a non-slip handle. The scissors are made of chrome vanadium steel with scraper and file on one sides plus 2 stripping notches. Both items fit securely in the leather pouch which can be mounted on belts up to 2″ wide.

Skinning Notch

18-20 AWG, 22-24 AWG

Handle Type

Chrome Vanadium Steel Loop, Thermal Plastic Rubber

Jonard Tools TK-375 Fiber Stripper & Scissor Kit

Jonard Tools TK-375 Fiber Stripper & Scissor Kit

Three Piece Fiber Optic Kit includes the JIC-375 Fiber Optic Stripper, ES-1964 Electrician’s Scissor, and convenient molded plastic pouch (with metal clip).

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

Jonard Tools FOD-2000 Fiber Optic Drop Cable Slitter

The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305″-.350″ and the height is .155″-.185″. These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

The FOD-2000 puts a slit on both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit. A simple twist of the cable allows the jacket and strength members to separate from the buffer tube leaving the fiber undamaged.

Designed for .250″ flat drop cables. The FOD-2000 comes completely assembled with two blades, which can be reversed once the blades are worn. Replacement blades are also available under part number FOD-RB25 for a package of 25 blades.

Jonard Tools CSR-1575 Cable Strip & Ring Tool

Jonard Tools CSR-1575 Cable Strip & Ring Tool

The CSR-1575 is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter. The tool features an easily adjustable slit blade and ring blade as well as a removable and reversible V block that improves slitting performance and accommodates smaller to larger diameter cables.

Simple to use:

Ringing a cable: Ring blade is easily adjustable using the adjustment knob. Rotate the knob toward the ” ” sign to increase cutting blade depth and rotate the knob toward the “-” sign to decrease cutting depth. Once depth is determined, open jaw, insert cable, rotate tool around cable 3 times, open jaw and remove cable, pull off jacket.
Slitting a cable: First select which V groove is needed on the V block, we recommend using the small V groove for cables 3mm or smaller and use the large V groove for cable larger than 3mm. To remove V block simply push on the V block, remove from tool.
Select groove then push V block back into tool. Set the depth of the slitting blade by loosening the screw holding the blade in place, use the tab on the blade to move the blade up or down to the desired slitting depth, tighten screw. Open jaw, insert cable to be slit, close jaw and pull.

Jonard Tools MS-6 Mid Span Slitter

Jonard Tools MS-6 Mid Span Slitter

Designed to provide easy access to optical fibers in loose buffer tubes 1.2mm – 3.3 mm diameter. With 6 precision grooves buffer tube slitting is done without damage to the fiber. The blades are replaceable.

For loose tube jacket.

Groove Sizes:

1.2 – 1.5 mm

1.5 – 1.8 mm

1.8 – 2.1 mm

2.1 – 2.5 mm

2.5 – 2.9 mm

2.9 – 3.3 mm

Easy to use:

Select the correct groove. Each groove is marked with the recommended fiber size

Place the fiber in the groove to be used. The arrow on the top of the MS-6 indicates blade location and pulling direction.

Close the tool making sure lock is engaged and pull

Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Kit includes:

JIC-375 Three Hole Fiber Optic Stripper

The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the 125 micron glass fiber without nicks or scratches.

JIC-186 Wire & Kevlar Cutting Shears

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material. Ergonomic handles for user comfort and durability. Adjustable joint screw under protective cap, serrated blade grip material, sharp and durable 6″ long.

H-60 Molded Two Tool Pouch

Made of durable PVC material with metal clip.

Eclipse 300-167 Fiber Optic Crimp Tool

Eclipse 300-167 Fiber Optic Crimp Tool

The Pro’sKit Fiber Optic Crimp Tool Lunar Series is designed for use with FC,SC,ST,LC, SMA & MT-RJ fiber optic connectors

HEX .139”, .151”, .178”, ROUND .134”, .190”

Jonard Tools TK-160 Fiber Prep Kit with Connector Cleaners & Visual Fault Locator

Jonard Tools TK-160 Fiber Prep Kit with Connector Cleaners & Visual Fault Locator

Jonard Tools’ TK-160 fiber preparation kit, with Connector Cleaners (FCC-126, FCC-250) & Visual Fault Locator (VFL-150) provides you with all of the tools needed to access and prepare a fiber optic cable for termination.

The TK-160 Fiber Prep Kit includes:

CST-1900 Round Cable Stripper
CSR-1575 Cable Strip & Ring Tool
FOD-2000 Fiber Optic Drop Cable Slitter
MS-6 Mid Span Slitter for opening various types of fiber optic cables
JIC-375 3-hole fiber stripper
JIC-186 Kevlar cutter for prepping the fiber for termination
SD-61 multi bit screwdriver
FL-2000 LED flashlight
JIC-2288 diagonal cutter
JIC-842 long nose pliers
FW-5 fiber wipes
FCC-125 Fiber Connector Cleaner 1.25mm
FCC-250 Fiber Connector Cleaner 2.5mm
VFL-150 Visual Fault Locator Kit

All of these tools are provided in a rugged tool case with extra pockets for additional tools, connectors and many other items.

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

The Jonard Tools FCC-125 quick click ferrule end face cleaner is designed to provide exceptional cleaning performance by cleaning LC connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

The FCC-125 features a patented 360 degree Rotational Tip for extra wide cleaning, easy one push operation and extendable nozzle, providing an additional 1.5 inches for a nozzle length of 4 inches to aid in accessing deep ports or crowded access panels. Additionally the FCC-125 uses a non-woven micro fiber that is lint free. The FCC-125 provides 800 cleanings and the outer body is made from static dissipative material for safe ESD work.

Jonard Tools patented cleaning technology features:

Slide-Guide™ non-slip micro tape feeder guarantees high reliability
Dual Rotational tip provides superior ferrule End face cleaning

876146001689 Fiber Optic Continuity Tester

876146001689 Fiber Optic Continuity Tester

F1-5000U

650nm LED Multimode Fiber Continuity Tester with 2.5mm Universal Adapter for SC, ST, FC

This Fiber Optic Continuity Tester is an excellent tool for fiber identification when multiple fibers are present. Simply connect your ST,FC, or SMA connector to the adapter and push the on/off button. The red LED light is transmitted down the fiber and escapes through the other end. The unit operates on two supplied AA batteries. The durable rubber packaging easily stores in a tool box. The continuity tester is a low cost, high quality unit.

This unit utilizes a red color LED to provide multimode only fiber continuity testing. It is excellent for continuity verification or simple fiber identification in an interconnect location. The flashlight shape and durable hard rubber casing make it very easy to work with.

This unit has a 2.5mm universal adapter which can accept all 2.5mm ferrule connectors such as FC, SC, ST and E2000.

Please note:

This unit can not replace the functions of a laser-based fault locator. Laser Fault Locators utilize a much higher powerful 650nm red laser to find breakage and bad bends in single mode and multimode fibers.

Battery: (2) AA Alkaline

Size 1.75” x 7.0”

Connector Styles 2.5um universal: ST SC FC SMA

(If needed, a hybrid patchcord and mating sleeve will enable efficient hook-ups to other connector styles.)