Neutrik NE8FDX-Y6-B D-Shape CAT6A Panel Connector

Receptacle etherCON CAT6A D series – shielded IDC – black

Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

EZ-RJ45® CAT6 Strain Relief

EZ-RJ45® CAT6 Strain Relief

202036J 100/jar

202036BLJ 100/jar

202036WHJ 100/jar

100036 50/bag

100036C 50/pk

105016 500/bulk

The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45® and ezEX-RJ45® plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug’s primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug’s locking tab, making it snag proof when administering patch cords. Colors: Clear, White, Blue

Maintain bend radiuses required for standards compliance.
Prolong patch cord life
Terminations have a professional finished look
No more snags or hang ups, causing tangled messes
Easier to unlock the connector when unplugging from jack/port
Optimizes electrical performance
UL and RoHS compliant
Colors: Clear, White, Blue
Made in the USA
Fits cables with jacket diameters up to 0.260″ (6.6mm)
NOT intended to be compatible with other brands >

Neutrik NE8FDY-C6-B Ethercon CAT6 D-Shape Panel Connectors

Receptacle etherCON CAT6 D series – IDC termination; no tool required- black. NOTE! etherCON CAT6 only. Not compatible with etherCON NE8MX* CAT5 / CAT6A cable ends
Attention! Intermates ONLY with NE8MC6-MO, NKE6S-* and generic RJ45 connectors.
Not compatible with the etherCON cable connector carriers NE8MC*, NE8MX* and the CAT6A cable connectors NE8MX6*.n! Intermates ONLY with NE8MC6-MO, NKE6S-* and generic RJ45 connectors.

The Ethercon Cat6 D-Shape Panel Connectors With Black Metal Housing And Secure Latching System Offer A Tool-Free And Gas-Tight Idc Termination, Which Makes Cable Assembly Easy And Fast.

F Female to F Male, Right Angle Adapter

F female to F male right angle adapter

Neutrik NE8FF Ethercon RJ45 Feedthrough Coupler

Adapter etherCON CAT5 cable to cable

Neutrik NE8MC6-MO Cable Plug Carrier Set

Cable end etherCON CAT6 – field termination – nickel – no RJ45 needed. NOTE! etherCON CAT6 only. Not compatible with etherCON CAT5 or CAT6a chassis connectors
Attention! intermates ONLY with NE8FDY-C6* CAT6 receptacles.
Not compatible with CAT5 and CAT6A chassis connectors.
The set NE8MC6-MO includes a cable plug carrier offering a robust metal shell with push-pull locking system, proven Neutrik chuck-type strain relief and a CAT6 RJ45 plug. The set can accommodate STP und UTP cables with O.D. of 5.5 to 6.5mm and gauge of AWG 22 to 28 solid or stranded wire. This self-termination version is water-protected according to IP65.

Neutrik NE8MX-1 Cable Connector Carrier, Nickel

Cable Connector Carrier Consists Of A Nickel Shell, Chuck And Boot. The Boot (Same As X-Series) Is Suitable For Cable Diameters From 3.5 – 8 Mm. For Non Pre-Assembled Cables Only. Cable Connector Carrier Does Not Include A RJ45 Plug.
Cable connector carrier X series etherCON CAT5 and CAT6A – nickel – requires RJ45, for unterminated cable
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.

ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.

Neutrik NE8MX-B Cable Connector Carrier, Black Chromium, For Pre-Assembled

RJ45 Cable Connector Carrier For Pre-Assembled RJ45 Plugs Consists Of Black Chromium Shell, Bushing And Boot. Packed With Two Cable Protection Elements For Cable Diameter Up To 8mm. Cable Connector Carrier Does Not Include A RJ45 Plug.
Cable connector carrier X series etherCON CAT5 and CAT6A – black – requires cable with RJ45 pre-terminated
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.

ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.

Neutrik NE8MX-B-1 Cable Connector Carrier, Black Chromium, For Non-Pre-Assembled

Cable Connector Carrier Consists Of A Black Chromium Shell, Chuck And Boot. The Boot (Same As X-Series) Is Suitable For Cable Diameters From 3.5 – 8mm. For Non Pre-Assembled Cables Only. Cable Connector Carrier Does Not Include A RJ45 Plug.
Cable connector carrier X series etherCON CAT5 and CAT6A – black – requires RJ45, for unterminated cable
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.

ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.

Neutrik NJ3FP6C Locking 1/4in Phone Jack

Neutrik NJ3FP6C Locking 1/4in Phone Jack

Locking 1/4″ phone jack, D-size shell, nickel metal housing and silver contacts

The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab. Standard D size front panel appearance. Selectable grounding options.

Neutrik NJ3FP6C-BAG Locking 1/4″ Phone Jack

Neutrik NJ3FP6C-BAG Locking 1/4″ Phone Jack

Securely locking chassis jack
Mates with all mono and stereo plugs specified acc. EIA RS-453 (A-gauge)
Selectable grounding options: standard isolated, to get a sleeve/panel connection red isolator on lateral screw must be removed
Dimensionally compatible with D Series (31 x 26 mm)
Solder terminals

Neutrik NL2MPXX 2 Pole Chassis Connector, Black D-Size Flange, Countersunk Thru Holes, 3/16″ Flat Tabs

Receptacle speakON XX series 2 pole – tab terminals for NLFASTON or soldering – countersunk screw holes for front or rear mounting
2 pole chassis connector, black D-size flange, countersunk thru holes, 3/16″ flat tabs. Does not intermate with the 4-pole cable connector.
The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.
This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 61984.

Neutrik NL4FC 4 Pole Cable Connector, Chuck Type Strain Relief

Cable end speakON 4 pole
The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

Neutrik NL4FX 4 Pole Cable Connector, Chuck Type Strain Relief, SPX

Cable end speakON SPX 4 pole
The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

Neutrik NL4MMX Lockable 4 Pole SpeakON Adapter

Neutrik NL4MMX Lockable 4 Pole SpeakON Adapter

Lockable 4 pole speakON adapter

Links two NL2/4F*s together for cable extension. Changes gender to male when permanently locked on the cable.

Features permanent secure connection on a speakON cable connector using 2nd lock. Can be permanently attached to NL2/4F*.

Neutrik NL4MPRXX 4 Pole Chassis Connector, Black Round G-Size Flange, Countersunk Thru Holes, 3/16″ Flat Tabs

Receptacle speakON XX series 4 pole – round flange – tab terminals for NLFASTON or soldering – countersunk screw holes for front or rear mounting
4 pole chassis connector, black round G-size flange, countersunk thru holes, 3/16″ flat tabs.
The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 61984.

Neutrik NL4MPXX 4 Pole Chassis Connector, Black D-Size Flange, Countersunk Thru Holes, 3/16″ Flat Tabs

Neutrik NL4MPXX 4 Pole Chassis Connector, Black D-Size Flange, Countersunk Thru Holes, 3/16″ Flat Tabs

Receptacle speakON XX series 4 pole – rectangular flange – tab terminals for NLFASTON or soldering – countersunk screw holes for front or rear mounting
4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16″ flat tabs.
The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 61984.

Neutrik NL8FC 8 Pole Cable Connector, Chuck Type Strain Relief

Cable end speakON 8 pole
The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.
For Cables 8 – 20 Mm Diameter, 30 A Continuous Per Contact