NC5MXX-B 5 pole Male Cable Connector, Black Metal Housing and Gold Contacts

NC5MXX-B 5 pole male cable connector with black metal housing and gold contacts.

NC5MXX-B 5 pole Male Cable Connector, Black Metal Housing and Gold Contacts

Five-pin XLR connectors are the standard choice for DMX512 digital lighting control.

The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features & Benefits

Male connector with improved locking recess without “window”, more stringent housing increases durability
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
Boot with polyurethane gland gives high protection to cable bending stresses
Colored rings and boots available for coding or identification
Sleek and ergonomic design – valuable and handy
Rugged zinc diecast shell, long-lasting and dependable
Internal thread on shell is well-protected against any damage

Downloads

Neutrik 103F Single Gang Wallplate With One NC3FD-L-1 Receptacle

Wallplate – single – NC3FD-L-1

Neutrik 203F Single Gang Dual Wallplate With Two NC3FD-L-1 Receptacles

Wallplate – dual – NC3FD-L-1

Neutrik 203M Single Gang Dual Wallplate With Two NC3MD-L-1 Receptacles

Wallplate – dual – NC3MD-L-1

Neutrik BSX-5-GREEN Bushing For Color Coding – Green

Colored boot – X series -Green

Neutrik BSX-9-WHITE Bushing For Color Coding – White

Colored boot – X series -White

Neutrik NA3MP 3 Pole XLR Male to Stereo 1/4″ Plug

Adapter – 3 pin male XLR to 1/4″ stereo plug – pre-wired
Tip, Ring, Sleeve Contact

Neutrik NAC3FC-HC PowerCON 32 A Cable Connector

Cable end – powerCON – 32 Amp high current (black) – screw terminals. The 32 A powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations. The connectors comprise of contacts for phase, neutral and protective earth (ground) conductors rated for currents up to 32 A and for voltages up to 250V.

Neutrik NAC3FCA Powercon Locking 3-Pole Power Connector

Neutrik NAC3FCA Powercon Locking 3-Pole Power Connector

The Neutrik NAC3FCA Powercon locking 3-Pole power connector is for mission-critical applications where current loads up to 20 Amps at 250 Volts (AC) are handled.

Neutrik NAC3FCB Lockable Cable Connector, Power-Out, Screw Terminals, Grey

Cable end – powerCON blue / grey – power out (grey). The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

Neutrik NAC3FPX Appliance Outlet Connector, 1/4” Flat Tab Terminals

Neutrik NAC3FX-W-TOP Locking Female Cable Connector, Screw Terminals

Cable end – powerCON TRUE1 TOP – female – power out – screw terminals – IP 65 and UV rated. The powerCON TRUE1 TOP is a locking 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

Neutrik NAC3MPB-1 Chassis Connector, Power-Out, 3/16” Flat Tab Terminals, Grey

Receptacle – powerCON blue / grey – power out (grey). The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

Neutrik NAC3MPX-TOP Appliance Inlet Connector, 1/4″ Flat Tab Terminals

Receptacle – powerCON TRUE1 TOP – male – power in – 1/4″ flat tab terminals – IP 65 and UV rated. The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

Neutrik NAC3MPXXA Appliance Inlet Connector

Neutrik NAC3MPXXA Appliance Inlet Connector

This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1.

Appliance inlet connector, 3/16″ flat tab terminals, blue

The powerCON XX is a locking mains connector. It replaces appliance couplers wherever a very reliable solution in combination with a locking device is needed in order to guarantee a safe power connection.

The powerCON XX is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

Neutrik NAC3MX-W-TOP Locking Male Cable Connector

Neutrik NAC3MX-W-TOP Locking Male Cable Connector

Locking male cable connector, screw terminals

The powerCON TRUE1 TOP is a locking 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

Neutrik NBB75DFIB Isolated BNC Chassis Connectors, Feedthrough In Black D-Shape Housing

Receptacle – BNC – D style – feedthrough – isolated – black – 75 Ohm. Neutrik’s BNC chassis connectors offer a true 75 Ohm design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard).

Neutrik NBNC75BTU11 RearTWIST HD BNC Cable Connector

Cable end BNC rearTWIST -Cable O.D. 4 – 8mm – 1.6 mm and 7.36 mm crimps – use Die Suffix -U or -PU – 75 Ohm
The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding.

The rearTWIST HD BNC cable connector offers a true 75 Ohm design and is perfectly suitable for HD applications. Suitable cables:
Belden 1694A (ANH), Belden 4694R, Bryant BD SD11, Canare L-4.5CHD, Clark Wire CD7506-0, CommScope 5765, Gepco VSD2001, Suhner S05163-02, Suhner S05133-07, Percon VK77

Crimp size:
Pin: 1.6 mm (square)
Shield: 7.36 mm (hex)