Hosa YMR-197 Stereo Breakout, 3.5 mm TRSF to Dual RCA

Stereo Breakout, 3.5 mm TRSF to Dual RCA

Hosa YPP-106 Y Cable, 1/4 in TSF to Dual 1/4 in TS

Y Cable, 1/4 in TSF to Dual 1/4 in TS

Hosa HSX-xxx Pro Balanced Interconnect, REAN 1/4 in TRS to XLR3M

Pro Balanced Interconnect, REAN 1/4 in TRS to XLR3M

Hosa YRA-105 Y Cable, RCAF to Dual RCA

Y Cable, RCAF to Dual RCA

Hosa YRA-154 Stereo Breakout, 3.5 mm TRS to Dual RCAF

Stereo Breakout, 3.5 mm TRS to Dual RCAF

Hosa YXF-119 Y Cable, Dual XLR3F to XLR3M, 6 in

Y Cable, Dual XLR3F to XLR3M, 6 in

Hosa YXM-121 Y Cable, XLR3F to Dual XLR3M, 6 in

Y Cable, XLR3F to Dual XLR3M, 6 in

Hosa PWC-4xx Power Cord, IEC C13 to NEMA 5-15P

Power Cord, IEC C13 to NEMA 5-15P

Hosa PWX-4xx Power Extension Cord, NEMA 5-15R to NEMA 5-15P

Extension Cord, Gauge: 14 AWG, Number of Conductors: 3, Jacket Type: SJT, Connectors: NEMA Type 5-15P, NEMA Type 5-15R, Voltage Rating: 125V, Amps: 15

This cable is designed to extend a power cord with a NEMA 5-15 plug to line power. It is ideal for use with computer equipment and pro audio gear. Features include:

• Oxygen-Free Copper (OFC) conductors for increased current flow
• Black PVC jacket for durability and low visibility on stage
• Intended for use in North America and with NEMA 5-15 receptacles

Connectors: NEMA 5-15R to NEMA 5-15P
Conductors: 14 AWG x 3 OFC

Neutrik DBA-BL D-Shape Cutout Dummy-Plate

Dummy-plate to cover D-shape cutouts

Data Sheet

Neutrik MRF12 12 Pole Female Chassis Connector Panel Mount, Solder Contacts

12 pole female chassis connector panel mount, solder contacts

The miniCON with its flexible and compact design is perfectly suitable for multipin/industrial applications. The rugged all metal miniature connector offers a push-pull locking device and stands out by an excellent cost/performance ratio.

Data Sheet

Neutrik NA-2I2O-DLINE Line I/O to DANTE® Interface

Connect your legacy audio gear to the DANTE® world. The Line I/O to DANTE® Interface is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a DANTE® network. Simultaneously, NA-2I2O-DLINE converts a DANTE® stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the DANTE® network while at the same time receiving a mix from another DANTE® source.

Line I/O to DANTE® Interface is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional
mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

ATTENTION: This device must only be powered via PoE injectors with compliant handshake functionality (IEEE 802.3af/at/bt). Use of non-compliant PoE injectors may cause permanent damage.

Data Sheet

Neutrik NA2FBNC 3 Pole XLR Female to BNC Socket (Adapter)

Adapter – 3 pin female XLR to BNC jack – pre-wired. Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground

Neutrik NA2MBNC 3 Pole XLR Male to BNC Socket (Adapter)

Adapter – 3 pin male XLR to BNC jack – pre-wired. Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground

Neutrik NA3FF 3 Pole XLR Female to 3 Pole XLR Female (Adapter)

Gender Conversion Adapter – 3 pin female XLR to 3 pin female XLR – pre-wired

Neutrik NA3MM 3 Pole XLR Male to 3 Pole XLR Male (Adapter)

Gender Conversion Adapter – 3 pin male XLR to 3 pin male XLR – pre-wired

Neutrik NAC3F-TRUE1-L PowerCON Connector

The powerCON TRUE1 is a locking true mains connector for harsh and demanding applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
The powerCON TRUE1 is a connector series with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

Data Sheet

Neutrik NAC3F-TRUE1-S PowerCON Connector

Data Sheet