Caig F5S-H6 DeoxIT Fader Moving Contact Lubricant

Caig F5S-H6 DeoxIT FaderLube Moving Contact Lubricant

Caig F5S-H6 DeoxIT Fader Moving Contact Lubricant

DeoxIT® Fader F-Series – Moving Contact Lubricant for Conductive Plastic Faders and Controls

Part No. F5S-H6 Spray:
Using Adjustable Low-Med-High Valve

Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT® Fader (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part No. FN5S-2N. Need more tactile feel, use the DeoxIT® Fader Grease after cleaning with DeoxIT® Fader F-Series.
Metal and/or Plastic: Not sure if faders have plastic and/or metal components, we recommend using DeoxIT D-Series, Part No. D100S-2 (100% DeoxIT spray).
INFO: Using DeoxIT® Sprays, Cautions, Warnings and Best Practices (caig.com/d-sprays).

DeoxIT® Fader F-Series is a precision lubricant and treatment for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.

Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components’ lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT® Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT® Fader will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT® Fader layer preventing contact with the plastic membrane.
For reference, DeoxIT® Fader F-Series has approximately 1% cleaning action.

KEY FEATURES:
- Formulated for Conductive Plastics/Controls
- Maintains Optimum Signal Quality
- Replenishes Lubrication Lost
- Maintains Tactile Feel
- Reduces Wear & Abrasion
- Temperature Range, -26 C (-15 F) to +150 C (302 F)

Techspray 1632-16S Contact Cleaner G3

In-store pickup or local delivery only.

16oz. Contact Cleaner, Aerosol. This innovative solvent blend of Honeywell’s HFC-245fa and 1,2-trans-dichloroethylene is a direct replacement for solvents containing HCFC-141b. Designed for removing oils, greases, silicones, dirt, and grim from switches, relays, contact pads, and other electrical connections. Non-ozone depleting. Non-flammable. Safe on most plastics. Rapidly evaporating.

Caig DDW-V611 ELECTRONIC CLEANER WASH, Val-U Series

NEW . . .
CAIG Brand ELECTRONIC CLEANER WASH, Val-U Series Spray, 5.5 oz. / 156 g, fast evaporating and safe on plastics Ergonomic / Easy to Handle.
RoHS and VOC Compliant.

Caig DCC-V511 CONTACT CLEANER WASH, Val-U Series

NEW . . .
CAIG Brand CONTACT CLEANER WASH, Val-U Series Spray, 5.5 oz. / 156 g, fast evaporating and safe on plastics Ergonomic / Easy to Handle
RoHS and VOC Compliant.

Caig D5S-6-LMH DeoxIT

DeoxIT D-Series D5 Spray, 5% solution, flushing action, L-M-H adjustable valve, 142 g (182 mL), each
(Applications = 1200 +/-)

Can using the original Low-Med-High (LMH) Adjustable valve

DeoxIT D-Series Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant

Part No. D5S-6-LMH (142 g)(182 ml):
Original Low-Med-High Adjustable Valve

Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part Nos. DN5S-2N and DN5S-6N.

Caig D100L-CPK DeoxIT Cell Phone Connector Cleaner

DeoxIT Cell Phone Connector Cleaning Kit, D100L Brush Bottle, 100% solution, 1.6 ml,
(Applications = 50 +/- drops, 0.04 ml/drop)
Ideal for connections on your cell phones, PDA s, MP3 Players, Cordless Phones and Mobile Radios.
100% Liquid, No solvents

Applicator: Micro Brush, provides NO flushing action, applies 100% DeoxIT, Great for OEMs or include in service kit.
Formulation: 100% DeoxIT.
Use: When contact and connector are easily accessible. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT.

Caig CCS-902 Microfiber Cleaning Cloth

MicroFiber Cleaning Cloth, 6 x 6″ Cloth. Ideal for cleaning Cell Phones, PDAs, Laptop & LCD Screens. Digital Cameras, DVDs and other Electronic Equipment.

KIE-80DS CR80 Card Reader Cleaning Card (Box of 50)

KIE-80DS CR80 Card Reader Cleaning Card (Box of 50)

CR 80 Card Size = 3 3/8” x 2 1/8”* Pre-saturated and individually sealed* Reduces residue build-up without dismantling equipment

Quick, easy, inexpensive preventative maintenance

Contains 99.7% isopropanol (IPA)

For card readers – like credit card terminals, POS terminals, gas pump card readers, credit vending machines, security/time/badge readers, player tracking cards, ATMs, hotel door locks and more.

Save time and eliminate misreads with regular maintenance.
Save Money. Eliminate the need for a service call.

Just a swipe with the credit card cleaner removes dirt, magnetic oxides, lotions and other contaminants from concealed magnetic and optic sensors.

Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.

Check availability here.

Techspray 1610-G4 Isopropyl Alcohol 99.8% 1 GAL

Techspray 1610-G4 Isopropyl Alcohol 99.8% 1 GAL

One Gallon Plastic Bottle

Sold individually

4 per case.

1-3 $49.94

4 $46.46

Store pickup or local delivery only.

99.8% Pure Anhydrous Isopropyl Alcohol
Excellent for Tape Head Cleaning
Defluxing
Stencil Cleaning
Fiber Optic Cleaning
Other Light Cleaning

Techspray 1610-50PK Alcohol Pre-Saturated Wipes 50 Pack

50 Individually wrapped Wipes in Dispenser Box

Low Linting Wipes
Pre-Saturated with 99.8% Pure IPA

TECHSPRAY Isopropyl Alcohol is 99.8 % pure, anhydrous isopropanol for all-purpose cleaning. Excellent for tape head cleaning, removal of fluxes, light oils, polar soils, and white mineral residue. Can be used as a thinner for most fluxes.
Features

Non-Ozone Depleting
Safe on Plastics
Rapidly Evaporating
Zero Residue
Non-Corrosive

Techspray 1631-16S Flux Remover G3

In-store pickup or local delivery only.

16oz. Flux Remover, Aerosol. This innovative solvent blend of Honeywell’s HFC-245fa and 1,2-trans-dichloroethylene is a direct replacement for solvents containing HCFC-141b. Designed specifically for removing R, RA, RMA, and SA type flux residues after high temperature reflow. Can be used as an all-purpose cleaner to remove light oils, silicones, waxes, greases, and similar contaminants often found in electronics manufacturing. Non-ozone depleting. Non-flammable. Safe on most plastics. Rapidly evaporating.

Techspray 1630-16S Blue Shower G3

In-store pickup or local delivery only.

16oz. Degreaser/Cleaner, Aerosol. This innovative solvent blend of Honeywell’s HFC-245fa and 1,2-trans-dichloroethylene is a direct replacement for solvents containing HCFC-141b. Designed for precision cleaning of polar and non-polar soils including hand and solder oils, greases, silicones, fluxes and other similar contaminants. Effective in cleaning electronic and electrical equipment, machinery, metal parts, and other general cleaning applications. Non-ozone depleting. Non-flammable. Safe on most plastics. Rapidly evaporating.

Techspray 1622-13S Contact Cleaner

Store pickup or local delivery only.

13oz. Contact Cleaner, Aerosol, This hexane mixture quickly penetrates to clean electrical contacts and connections. Ideal for switches, relays, contact pads, and other electrical connections. Safe on most plastics, the solvent will not damage switch housings. Non-corrosive.

Techspray 1621-10S Flux Remover

10oz. Flux Remover, Aerosol, This combination of hydrocarbon solvents and alcohols make dissolves type R, RMA, SA, and most no-clean fluxes. Can also be used as an all-purpose cleaner for removal of light oils, silicones, waxes, greases, and similar contaminants. Contains THF. Non-ozone depleting. Non-corrosive. Evaporates rapidly. Safe on plastics.

Canned air and other chemicals can only be shipped via Ground Services and comes in 12 cans per case, although you may order any amount you wish.