MaxPro 8227 Canned Air Duster

Say goodbye to dust, dirt, and debris with the Max Pro Compressed Air Duster’s high-pressure performance. Its strong burst of air reaches every nook and cranny, making it perfect for cleaning computers, laptops, keyboards, cameras, and more.

  • Effortless cleaning

    Experience effortless cleaning with the ergonomic design of the MaxPro Air Duster.

  • Simple and intuitive

    Just point and spray to eliminate dust, ensuring your devices and equipment look and perform at their best.

  • Elevate your cleaning game with the MaxPro Compressed Air Duster

    The perfect companion for a cleaner, safer, and more efficient electronic experience.

 



O2 Hurricane CA-202 Industrial Canless Air System

ca-202-industrial-canless-air-system-o2-hurricane

O2 Hurricane CA-202 Industrial Canless Air System

Free shipping for orders over $100
The O2 Hurricane Industrial Model is by far the most powerful cordless electronic air duster on the market with air speeds of over 200MPH. Each charge is equal to 5 cans of air and can be charged 500 times.

Uses only the air we breathe- no Difluoroethane, no hydrofluorocarbons.
NO inhalation or frostbite healthhazards.
NO danger of explosion or flash fire.

  • Produces an incredible blast of air at over 220 MPH and runs for over 15 minutes straight.
  • Is equal to more than 5 cans of air per charge and can be charged up to 500 times.
  • Designed for corporate and IT department use.
  • Great for cleaning large computers, server rooms, camera lenses and mirrors, high end medical equipment, displays in retail stores, complex circuit boards and so much more.
  • 1 Year Limited Warranty.
  • Rated for outlets 110-240v

AIR SPEED
200 Miles Per Hour
SOUND
Sounds Like an Electric Razor
LIFE OF PRODUCT
Can be Charged Approximately 500 Times
CHARGE TIME:
Normal Use 4-6 Hours
CONTINUOUS RUN TIME ON ONE CHARGE
15 Minutes
(this is equal to 24 cans of canned air)
HAND HELD, CORDLESS & RECHARGEABLE LIKE A CELL PHONE
Height: 7 3/4″
Weight: 18.2 oz.
BATTERIES
12V Nickel Metal Hydride (NiMH)

Each Canless air system includes:
(1) 110v Wall Charger
(2) 5″ Straws

 



KIE-80DS CR80 Card Reader Cleaning Card (Box of 50)

KIE-80DS CR80 Card Reader Cleaning Card (Box of 50)

CR 80 Card Size = 3 3/8” x 2 1/8”* Pre-saturated and individually sealed* Reduces residue build-up without dismantling equipment

Quick, easy, inexpensive preventative maintenance

Contains 99.7% isopropanol (IPA)

For card readers – like credit card terminals, POS terminals, gas pump card readers, credit vending machines, security/time/badge readers, player tracking cards, ATMs, hotel door locks and more.

  • Save time and eliminate misreads with regular maintenance.
  • Save Money. Eliminate the need for a service call.

Just a swipe with the credit card cleaner removes dirt, magnetic oxides, lotions and other contaminants from concealed magnetic and optic sensors.

Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.

Check availability here.



CA-7005A Holster for CA-202 Canless Air System

CA-7005A Holster for CA-202 Canless Air System

CA-7005A Holster for CA-202 Canless Air System:

With Canless Air System’s new belt holster, you will never have to be without your 02 Hurricane again! Works with both the standard and industrial models of the 02 Hurricane.

 



Caig D100L-CPK DeoxIT Cell Phone Connector Cleaner

Caig D100L-CPK DeoxIT Cell Phone Connector Cleaner

Caig D100L-CPK DeoxIT Cell Phone Connector Cleaner

DeoxIT Cell Phone Connector Cleaning Kit, D100L Brush Bottle, 100% solution, 1.6 ml,
(Applications = 50 +/- drops, 0.04 ml/drop)
Ideal for connections on your cell phones, PDA s, MP3 Players, Cordless Phones and Mobile Radios.
100% Liquid, No solvents

Applicator: Micro Brush, provides NO flushing action, applies 100% DeoxIT, Great for OEMs or include in service kit.
Formulation: 100% DeoxIT.
Use: When contact and connector are easily accessible. No flushing action.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT.



Caig D5S-6-LMH DeoxIT

Caig D5S-6-LMH DeoxIT

Caig D5S-6-LMH DeoxIT

DeoxIT D-Series D5 Spray, 5% solution, flushing action, L-M-H adjustable valve, 142 g (182 mL), each
(Applications = 1200 +/-)

Can using the original Low-Med-High (LMH) Adjustable valve

DeoxIT D-Series Contact/Connector Treatment, Deoxidizer, Rejuvenator & Protectant

Part No. D5S-6-LMH (142 g)(182 ml):
Original Low-Med-High Adjustable Valve

Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part Nos. DN5S-2N and DN5S-6N.



Caig DCC-V511 CONTACT CLEANER WASH, Val-U Series

Caig DCC-V511 CONTACT CLEANER WASH, Val-U Series

Caig DCC-V511 CONTACT CLEANER WASH, Val-U Series

NEW . . .
CAIG Brand CONTACT CLEANER WASH, Val-U Series Spray, 5.5 oz. / 156 g, fast evaporating and safe on plastics Ergonomic / Easy to Handle
RoHS and VOC Compliant.



Caig DDW-V611 ELECTRONIC CLEANER WASH, Val-U Series

Caig DDW-V611 ELECTRONIC CLEANER WASH, Val-U Series

Caig DDW-V611 ELECTRONIC CLEANER WASH, Val-U Series

NEW . . .
CAIG Brand ELECTRONIC CLEANER WASH, Val-U Series Spray, 5.5 oz. / 156 g, fast evaporating and safe on plastics Ergonomic / Easy to Handle.
RoHS and VOC Compliant.



Caig F5S-H6 DeoxIT Fader Moving Contact Lubricant

Caig F5S-H6 DeoxIT FaderLube Moving Contact Lubricant

Caig F5S-H6 DeoxIT Fader Moving Contact Lubricant

DeoxIT® Fader F-Series – Moving Contact Lubricant for Conductive Plastic Faders and Controls

Part No. F5S-H6 Spray:
Using Adjustable Low-Med-High Valve

Applicator: Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
Formulation: 5% DeoxIT® Fader (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
Use: Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
Notes: Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates. For quick-dry, non-drip spray, we recommend Part No. FN5S-2N. Need more tactile feel, use the DeoxIT® Fader Grease after cleaning with DeoxIT® Fader F-Series.
Metal and/or Plastic: Not sure if faders have plastic and/or metal components, we recommend using DeoxIT D-Series, Part No. D100S-2 (100% DeoxIT spray).
INFO: Using DeoxIT® Sprays, Cautions, Warnings and Best Practices (caig.com/d-sprays).

DeoxIT® Fader F-Series is a precision lubricant and treatment for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.

Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components’ lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. Another use for DeoxIT® Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT® Fader will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT® Fader layer preventing contact with the plastic membrane.
For reference, DeoxIT® Fader F-Series has approximately 1% cleaning action.

  • KEY FEATURES:
    • Formulated for Conductive Plastics/Controls
    • Maintains Optimum Signal Quality
    • Replenishes Lubrication Lost
    • Maintains Tactile Feel
    • Reduces Wear & Abrasion
    • Temperature Range, -26 C (-15 F) to +150 C (302 F)

 



Caig RSF-R80-2 CAIG Rosin Flux (Jar)

Caig RSF-R80-2 CAIG Rosin Flux (Jar)

Caig RSF-R80-2 CAIG Rosin Flux (Jar)

CAIG Rosin Soldering Flux, 56 gram jar
SPECS: The RMA paste flux meets DOD-STD-2000 & also the IPC-J-004 standard for type ROL0 , the lowest residue corrosivity category.
CAIG Rosin Soldering Flux, TYPE RSF-R80

Part No. RSF-R80-2:
Jar, 56 grams

Applicator: Jar
Formulation: WW Gum Rosin, Diethyene Glycol Dibutyl, Dymerex Rosin.
Use: Electrical soldering
Notes: General purpose flux for soldering electrical connections. Use CAIG NO-CLEAN Soldering Flux, TYPE RSF-R39 for precision soldering.



CO-2/6 CO2 Replacement Cartridges 6/pk

CO-2/6 CO2 Replacement Cartridges 6/pk

CO-2/6 CO2 Replacement Cartridges 6/pk

NOTE: In store pickup or ship by UPS Ground only IMPORTANT NOTE: Liquefied gas under pressure will naturally produce a “cold effect” when discharged. Unlike large aerosol canisters, the CO2 (with the 12 gram cartridge) is a very tiny unit and does not have the same surface area to dissipate the cold as large units, so it is important to follow the CO2’s operating instructions; DO NOT FULLY DEPRESS THE TRIGGER. ONLY USE QUICK, SHORT BURSTS. By doing so you will reduce the “cold effect” and keep the output pressure as high as possible.

C02 Replacement Cartridges

A high velocity, residue free stream of gas, perfect for cleaning cameras, camcorders, electronics, musical instruments, sewing machines, electric razors, smoke detectors and much more. Additionally, carbon dioxide gas will not break down delicate lubricants, inks and dyes.

The CO-2/6 must be used with the CO-2. Do not use gas cylinders designed for use with BB guns. These cylinders contain lubricating oils that will permanently contaminate the valve and nozzle as well as damage the equipment being cleaned! Therefore, only use AMERICAN RECORDER TECHNOLOGIES branded cylinders.

NOT FOR USE WITH THE NEW C0-2016, which only takes 16 gram cartridges.

 



CO-2018 Duster with Three 16 gram Cartridges

CO-2016 Duster with Three 16 gram Cartridges

CO-2018 Duster with Three 16 gram Cartridges

C02018 Duster with THREE 16 gram carbon dioxide cartridges

Please note we can only ship the CO2 product in the lower 48 states (no Alaska or Hawaii), and only by UPS, not USPS (mail).  

The following products can only ship in the lower 48 states (no air shipments):

CO2 Gas Products

Nitrogen Gas Products

Aerosol Sprays (including Deoxit)

Flammable liquids (S-721 Tape Head Cleaner, Optical Sensor Cleaning Fluid)

 

A high velocity, residue free stream of gas, perfect for cleaning cameras, camcorders, electronics, musical instruments, sewing machines, electric razors, smoke detectors and much more. Additionally, carbon dioxide gas will not break down delicate lubricants, inks and dyes.

If you currently use an aerosol duster, you may have heard it referred to as “canned air”. However you should know there is no such thing as “CANNED AIR”. All you have to do is read the warning label on traditional aerosol dusters to see they contain chemicals that emit harmful and potentially toxic or flammable vapors.  Not only are you exposing yourself to these dangerous chemicals, but your family, pets or co-workers as well.  In addition, these chemicals can leave a residue that adversely effect delicate materials and sensitive equipment!  There is an alternative to harmful aerosols and that is carbon dioxide gas. Carbon dioxide is a pure gas that exists naturally in Earth’s atmosphere, so it is not dangerous to human health. In fact, carbon dioxide gas is part of the Earth’s “Cycle of Life” – plants absorb carbon dioxide as food and produce oxygen as waste, which humans and animals then breathe. It is also an environmentally friendly gas that demands much less energy to produce than synthetic aerosols chemicals.   Carbon dioxide gas is totally safe to use on all types of electronics, musical instruments, electric razors, sewing machines, smoke detectors, lab equipment, forensics, tablets and phones. Additionally delicate lubricants, inks, toner, fabric, dyes will not be adversely effected by carbon dioxide gas. And unlike aerosol cans that can only be partially recycled, the CO2’s empty steel cartridges are 100% recyclable.    The CO2 is our smallest unit, perfect for travel and working in tight areas.  This model includes a precision valve and nozzle with 3 each – 16 gram carbon dioxide cartridges.   

IMPORTANT NOTE: Liquefied gas under pressure will naturally produce a “cold effect” when discharged. Unlike large aerosol canisters, the CO2  is a very tiny unit and does not have the same surface area to dissipate the cold as as large units, so it is important to follow the CO2’s operating instructions; DO NOT FULLY DEPRESS THE TRIGGER. ONLY USE QUICK, SHORT BURSTS. By doing so you will reduce the “cold effect” and keep the output pressure as high as possible.

Click here for replacement cartridges: CO-42104 16gram cartridges, 3/pk



CO-42104 16 gram Cartridges for CO-2018, 3/pk

CO-42104 16 gram Cartridges for CO-2018, 3/pk

Replacement cartridges for CO-2018

16 gram, 3/pk

Not for CO-2 which uses 12 gram cartridges

Please note we can only ship the CO2 product in the lower 48 states (no Alaska or Hawaii).

The following products can only ship in the lower 48 states (no air shipments):

 

CO2 Gas Products

Nitrogen Gas Products

Aerosol Sprays (including Deoxit)

Flammable liquids (S-721 Tape Head Cleaner, Optical Sensor Cleaning Fluid)

 



Metro Vac ED-500 DataVac Electric Duster

Metro Vac ED-500 DataVac Electric Duster

FREE SHIPPING on orders over $100

Metro Vac’s “Green Power” Blows Off “Canned Air”

  • The Metro Vac ED-500 DataVac Electric Duster is the newest addition to Metro’s proven DataVac® line.
  • It is much more compact and comfortable to use than previous models and features a new, almost unbelievably powerful 500-Watt motor.
  • It literally blasts dust, dirt and debris off of expensive computer/electronic equipment to keep it running at peak efficiency.
  • The new DataVac® Electric Duster® is a “greener”, more effective and cost-efficient alternative to controversial “canned air” products.
Construction: Sturdy All Steel Baked Enamel Finish
Motor: .75 Peak HP Motor
Air Flow: 70 CFM
Fan: Single Stage Fan
Amps: 4.5 Amps
Volts: 120 Volts
Cord: 12 Ft. 2 Conductor Cord
Attachments: Air-Pin Pointer, Air Concentrator Nozzle, Air-Flare Nozzle and 4-Piece Detailing Tool Kit
Weight: 2.7 lbs.

 

Metrovac

 



F125123 1.25mm Wrapped Swabs, 5/pack

F125123 1.25mm Wrapped Swabs, 5/pack

When cleaning fiber connector endfaces inside bulkheads, mating sleeves and other recessed areas, you’ll appreciate the extended reach that our  1.25mm swabs provide.

  • Cleans connector endfaces inside bulkheads, mating sleeves and other recessed areas
  • Fits LC, MU, and other 1.25mm ferrule fiber connectors/adapters

(General Purpose Cotton Swabs do not fit into 2.5mm or 1.25mm adapters.)

 



Rechargeable Cordless Air Duster

Rechargeable Air Duster

Rechargeable Cordless Air Duster

FREE SHIPPING FOR $100 or more

Ultra-strong Airflow for Deep Cleaning of Microscopic Dust
Cleans Keyboards • Computer Cases • Camera Lenses
Printed Circuit Boards • Laptops and more
USB-C Fast Charging
Efficient and Safe

 



Techspray 1610-50PK Alcohol Pre-Saturated Wipes 50 Pack

Techspray 1610-50PK Alcohol Pre-Saturated Wipes 50 Pack

Techspray 1610-50PK Alcohol Pre-Saturated Wipes 50 Pack

50 Individually wrapped Wipes in Dispenser Box

  • Low Linting Wipes
  • Pre-Saturated with 99.8% Pure IPA

TECHSPRAY Isopropyl Alcohol is 99.8 % pure, anhydrous isopropanol for all-purpose cleaning. Excellent for tape head cleaning, removal of fluxes, light oils, polar soils, and white mineral residue. Can be used as a thinner for most fluxes.
Features

  • Non-Ozone Depleting
  • Safe on Plastics
  • Rapidly Evaporating
  • Zero Residue
  • Non-Corrosive

 



Techspray 1610-G4 Isopropyl Alcohol 99.8% 1 GAL

Alcohol Gal Bottle

Techspray 1610-G4 Isopropyl Alcohol 99.8% 1 GAL

One Gallon Plastic Bottle

Sold individually

4 per case.

1-3 $49.94

4 $46.46

Store pickup or local delivery only.

  • 99.8% Pure Anhydrous Isopropyl Alcohol
  • Excellent for Tape Head Cleaning
  • Defluxing
  • Stencil Cleaning
  • Fiber Optic Cleaning
  • Other Light Cleaning