Viking RAD-1A Line Powered Remote Access Device

Viking RAD-1A Line Powered Remote Access Device

Free shipping on orders over $100

The RAD-1A Remote Access Device gives authorized users remote access to one-way paging amplifiers, digital announcers and other audio programs. A programmable access code prohibits access by unauthorized users.

The RAD-1A answers on the first ring and disconnects on CPC, call time out, silence time out, busy or by dialing #7. Separate 600 Ohm audio and telephone line outputs are provided, allowing connection to audio amplifiers, digital announcers, or phone systems. The user does not have to hang up and redial the RAD-1A to access other features.

  • Power: Telephone Line Powered (24VDC / 20mA)
  • Dimensions: 5.25″ x 3.5″ x 1.75″ (133mm x 89mm x 44mm)
  • Shipping Weight: 0.9 lbs (0.41 kg)
  • Operating Temperature: 32°F to 90°F (0°C to 32°C)
  • Humidity: 5% to 95% non-condensing
  • Relay Contact Ratings: 1A @ 30VDC / 0.5A @ 125VAC, 250VAC maximum
  • Audio Loss (through unit): 1dB
  • Connections: (2) RJ11 modular jacks, (7) cage clamp screw terminals

[Limited To Stock on hand]




Neutrik NRP1RU-2A Rack Panel 19 Inch 1RU

Neutrik NRP1RU-2A Rack Panel 19 Inch 1RU

With the NRP1RU-2A 1RU panel it’s possible to mount 2 of the NA2-IO-DLINE interfaces within a rack. 4 additional D-shape cut-outs allow the assembly of audio or network feed-throughs. The NA2-IO-DLINE can either be mounted from the front or from the rear side.

 

 




NA-MB-KIT Mounting Bracket Kit for NA2-IO-DLINE

NA-MB-KIT Mounting Bracket Kit for NA2-IO-DLINE

The adapter bracket set supports the assembly of one NA2-IO-DLINE interface inside a floor box or below tables. A stepless angle from -90° to +90° can be set. All necessary screws are included in the set.




Neutrik NA2-IO-DLINE Dante I/O Interface

Neutrik NA2-IO-DLINE Dante I/O Interface

Neutrik NA2-IO-DLINE Dante I/O Interface

Feed analog audio signals into the Dante­™ network while simultaneously receiving a mix from another Dante source with Neutrik’s NA2-IO-DLINE. This end-of-network breakout box allows two channels of audio to be integrated into a Dante network. Plus, this compact box converts a Dante stream into analog audio signals at the same time.

With lockable chassis connectors for both the audio and network connections, NA2-IO-DLINE is designed for harsh stage conditions. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

  • Connect analog audio equipment to a Dante network
  • Heavy duty adapter for rugged stage conditions
  • Lockable audio and network connections
  • Convert up to two analog line signals to a Dante network
  • Feed non Dante ready amplifiers, speakers or mixing desks with signals from the Dante network
  • Requires a Power over Ethernet switch or a PoE injector (802.3 af/at; class 1)
  • AES67 compliant
  • Rack mountable

NA-MB-KIT Mounting Bracket Kit for NA2-IO-DLINE

Neutrik NRP1RU-2A Rack Panel 19 Inch 1RU

Product brochure NA2-IO-DLINE

 




Hosa GLT-255 Mic Ground Lifter

Hosa GLT-255 Mic Ground Lifter

Hosa GLT-255 Mic Ground Lifter

Hosa Ground Lifter, XLR-3F to XLR-3M. Used to eliminate ground loops. Pin 1 is lifted. Ideal for eliminating interference associated with ground loops.