Platinum Tools 100010C EZ-RJ45 Cat 6+ Connectors, 50pcs

Platinum Tools 100010C EZ-RJ45 Cat 6+ Connectors, 50pcs

The Platinum 100010C EZ-RJ45 Cat 6+ Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. The electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. This reduces the distance between the wire twists and contacts. When terminating your EZ connectors, twist all your extended conductors together into one tight bundle and then insert into your EZ crimp tool to be terminated.

  • Simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front
  • Technician can easily verify the proper wiring order
  • Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector
  • Reduces the distance between the wire twists and contacts improves performance
  • For use in Cat 6 compliant data networks



ezEX™48 - ezEX-RJ45™ Connecto

Platinum ezEX™48 – ezEX-RJ45™ Connector

Platinum ezEX™48 – ezEX-RJ45™ Connector

100029C 50/pk  $38.68

202048J 100/jar  $76.22

105025  500/bulk  $373.66

 

This ezEX™48 Connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows larger conductors to pass through the front end of the connector. Making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A and is terminated with EXO Crimp Frame™ and EXO-EX Die (100061C).

  • Hi-Lo stagger isolates each conductor for higher performance
  • Simple one piece/pass through design, no bars or liners
  • Insulation Diameter (Conductor) Size range: .043” – .048” (1.09 –1.22mm)
  • Max outer diameter: .290” (7.36mm)
  • Typically used with Cat6A
  • Solid or Stranded 24-22 AWG
  • RoHS 2, UL & FCC compliant
  • Made in the USA



EXO Crimp Frame™ with EXO-EX Die™

Platinum 100061C EXO Crimp Frame™ with EXO-EX Die

Platinum 100061C EXO Crimp Frame™ with EXO-EX Die

The patented EXO Crimp Frame™ + EXO-EX Die™ was developed to terminate larger cables and conductors (typically Cat6/6A). EXO Crimp Frame™ + EXO-EX Die™ is designed for the ezEX-RJ45™ connectors. The ezEX-RJ45™ connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance, one piece design pass through system. The EXO Crimp Frame has a patented push button lock, ergonomic TPR handles and works with the EZ-RJ45® Die for terminating EZ-RJ45® connectors.

  • Single cycle crimp and flush trim
  • EXO Die™ is easily interchangeable
  • Reversible EXO Die™ for ambidextrous operation
  • Connectors lock into tool for correct positioning during crimp
  • Push button lock for easy storage
  • Ergonomic comfort grip TPR handles
  • Includes EXO-EX Die™ for crimping ezEX™44 and ezEX™48 connectors
  • Terminates larger cables and conducts Cat6 and Cat6A

EXO Crimp Frame works with EZ-RJ45® Die for crimping EZ-RJ45® connectors.

Insulation Diameter (Conductor) size range: 0.039” to 0.048”

Max Outer Diameter: .290” (7.36mm)

 




EXO Crimp Frame™ with EZ-RJ45® Die

Platinum 100062C EXO Crimp Frame™+ EZ-RJ45® Die

Platinum 100062C EXO Crimp Frame™+ EZ-RJ45® Die

The patented EXO Crimp Frame + EZ-RJ45® Die was designed for termination of EZ-RJ45® connectors. The included EZ-RJ45® Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the original pass through EZ-RJ45® connectors which are a standard in the industry. The EXO Crimp Frame highlights a push button lock, ergonomic TPR handles, and works with the EXO-EX Die™ (P/N 100071C) for terminating ezEX-RJ45™ connectors.

  • Single cycle crimp and flush trim
  • EZ-RJ45® Die is easily interchangeable
  • Reversible EZ-RJ45 Die for ambidextrous operation
  • Connectors lock into tool for correct positioning during crimp
  • Push button lock for easy storage
  • Ergonomic comfort grip TPR handles
  • Includes the EZ-RJ45® Die for crimping EZ-RJ45®

EXO Crimp Frame works with EXO-EX™ Die for crimping ezEX-RJ45™ connectors




ezEX™44 - ezEX-RJ45™ Connector

Platinum ezEX™44 Connector

Platinum ezEX™44 Connector

100028C 50/pk  $31.88

202044J 100/jar  $62.90

105024 500/bulk  $307.40

The ezEX™44 Connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar that allows larger conductors to pass through the front end of the connector. Making it easy to verify the wiring sequence before terminating. The connector is typically used with Cat6 and is terminated with EXO Crimp Frame™ and EXO-EX Die (100061C).

  • Hi-Lo stagger isolates each conductor for higher performance
  • Simple one piece/pass through design, no bars or liners
  • 5e/6/6A compliant
  • Insulation diameter (conductor)
    • Size range: .039” – .044” (1.0 –1.12mm)
  • Max outer diameter: .290” (7.36mm)
  • Solid or Stranded 22-24 AWG
  • RoHS 2, UL & FCC compliant

Made in the USA

Insulation Diameter (Conductor) size range: .039” – .044” (1.0 –1.12mm)

Max Outer Diameter: .290” (7.36mm)

Solid or Stranded 22-24 AWG

The ezEX™44 Connector is designed for larger cables and conductors (typically Cat6).

 




Platinum Tools 100004C EZ-RJ45 Crimp Tool

Platinum Tools 100004C EZ-RJ45 Crimp Tool

Platinum Tools 100004C EZ-RJ45 Crimp Tool

This high quality crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45® Connector in one easy simple operation! The ratcheted straight action crimping motion ensures a uniform crimp every cycle. Features precision cast crimping dies for superior accuracy. Built in wire cutter and stripper for silver satin. All steel frame with rust resistant black oxide finish.

  • Crimps and trims extended wire in EZ-RJ45® Connector in a single cycle. (EZ-RJ12/11® requires manual trimming)
  • For use with EZ-RJ45® Cat 5/5e & Cat 6 Connectors.
  • Will also work on most other RJ-11, RJ-12 and RJ-45 connectors. (Except AMP)
  • Patented



EZ-RJ45 Die for EXO Crimp Frame

Platinum 100072C EZ-RJ45® Die for EXO Crimp Frame

Platinum 100072C EZ-RJ45® Die for EXO Crimp Frame

The patented EZ-RJ45® Die is used with the EXO Crimp Frame™ to terminate EZ-RJ45® connectors. The EZ-RJ45® Die is interchangeable and reversible when used with EXO Crimp Frame™. Designed for the original pass through EZ-RJ45® connectors which have been a standard in this industry for many years.

  • Single cycle crimp and flush trim
  • EZ-RJ45® Die is easily interchangeable
  • Reversible EZ-RJ45® Die for ambidextrous operation
  • Connectors lock into tool for correct positioning during crimp
  • Compatible with EZ-RJ45 connectors: EZ-RJ45 Cat5e and Cat6, Shielded Cat5e and Cat6 connectors (internal and external ground)

 




Platinum 100071BL EXO-EX Die™ Replacement Blade

Platinum 100071BL EXO-EX Die™ Replacement Blade

Replacement blade specifically for the EXO-EX Die™.  A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

  • Replacing blade improves the performance of your termination
  • Compatible with EXO-EX Die™ only
  • Qty 2



EXO-EX Die™ for EXO Crimp Frame™

Platinum 100071C EXO-EX Die™

Platinum 100071C EXO-EX Die™

The patented EXO-EX Die™ is used with the EXO Crimp Frame™ to terminate ezEX-RJ45™connectors (typically used in Cat6 and Cat6A).  The EXO-EX Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the new ezEX-RJ45™connectors (ezEX™44 and ezEX™48). The ezEX-RJ45™ connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance and one piece design pass through system.

  • Single cycle crimp and flush trim
  • Easily interchangeable
  • Reversible for ambidextrous operation
  • Connectors lock into tool for correct positioning during crimp
  • Compatible with ezEX™44 and ezEX™48 connectors
  • Terminates larger cables and conductors Cat6 and Cat6A



Platinum Tools 100020 Shielded EZ-RJ45® for CAT5e & CAT6

Platinum Tools 100020 Shielded EZ-RJ45® for CAT5e & CAT6

50/pk

The EZ-RJ45® fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45® design with the performance advantage inherent to shielded products to provide an unparalleled solution for the market.

  • EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
  • Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
  • Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
  • Significantly improve Shannon capacity.
  • Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
  • Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
  • Max Cable OD: 0.260″; Max Conductor OD: 0.041″
  • Made in the USA, Patented



Platinum Tools 18005 Gold F-Type RG6 Quad SealSmart Compression Connector, 10-pk

Platinum Tools 18005 Gold F-Type RG6 Quad SealSmart Compression Connector, 10-pk

Platinum Tools 18005 Gold F-Type RG6 Quad SealSmart Compression Connector, 10-pk

10/pk

Platinum Tools’ SealSmart Compression Connectors provide simple, fast and reliable terminations. The perfect solution for CATV, DSS, Security, Home Theater and Residential Structured wiring installations.

  • Molded in gasket provides a weather tight seal at cable entry.
  • Single crimp termination with captive center contact design.
  • Universal crimp tool terminates all three SealSmart Connector designs.

 

 




100022 Cat5/6 EZ-RJ45 Connector

Platinum Tools 100022-50 Shielded EZ-RJ45® for CAT5e & CAT6

Platinum Tools 100022-50 Shielded EZ-RJ45® for CAT5e & CAT6

The patented shielded EZ-RJ45® CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable & shielded connectors.  50/bag

  • For use with CAT5e/6+ shielded cable
  • For solid round or stranded wire cables.
  • Max Cable OD: 7.11mm (0.280″), Max Insulated wire OD: 1.041mm (0.041″)
  • UL Rated, FCC compliant
  • Patented. patents insured
  • TAA Compliant



Platinum 100072BL EZ-RJ45 Die Replacement Blade

Platinum 100072BL EZ-RJ45 Die Replacement Blade

Replacement blade specifically for the EZ-RJ45® Die. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

  • Replacing blade improves the performance of your termination
  • Compatible with EZ-RJ45® Die
  • Qty 2



Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector

Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector 100 pack

Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector 100 Pack

  • Max cable OD: 8.5mm/0.335″
  • Max conductor OD: 1.35mm/0.053″
  • UL and RoHS compliant

Connector is only compatible with Platinum Tele-TitanXg™ and Tele-TitanXg™ 2.0 Crimp Tool. 
View instruction sheet

Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6e, CAT6A and CAT7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements.




Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector

Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector 50 pack

Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector 50 Pack

  • Max cable OD: 8.5mm/0.335″
  • Max conductor OD: 1.35mm/0.053″
  • UL and RoHS compliant

Connector is only compatible with Platinum Tele-TitanXg™ and Tele-TitanXg™ 2.0 Crimp Tool. 
View instruction sheet

Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6e, CAT6A and CAT7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements.




Platinum Tools 100003BG Cat5e EZ-RJ45 Connectors.100-pk

Platinum Tools 100003-50 Cat5e EZ-RJ45 Connectors 50/PK

Platinum Tools 100003-50 Cat5e EZ-RJ45 Connectors 50/PK

50/pack

The patented EZ-RJ45® Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance! Reduces scrap, no wasted crimps. More reliable, higher performance. Crimp with the patented EZ-RJ45 Crimp Tool…crimps and trims in one cycle. Manufactured in the USA. Patented.

  • Thru holes allow wire pairs to be inserted thru front of connector for faster terminations.
  • Works with solid or stranded wire.
  • Simple one piece design…no bars or liners.
  • FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks.
  • RoHS compliant
  • EZ to verify wire sequence.
  • Compatible with cables having a max OD of 0.260″ and conductor max OD of 0.041″.



Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector

Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector

Platinum Tools 106190 RJ45 CAT6A 10Gig Shielded Connector

  • Max cable OD: 8.5mm/0.335″
  • Max conductor OD: 1.35mm/0.053″
  • UL and RoHS compliant

Connector is only compatible with Platinum Tele-TitanXg™ and Tele-TitanXg™ 2.0 Crimp Tool. 

Sold “each”, minimum quantity 1 pc.
View instruction sheet

Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6e, CAT6A and CAT7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements.




Platinum Tools 12515 Tele-TitanXg™ CAT6A/10Gig Crimp Tool

Platinum Tools 12515 Tele-TitanXg™ CAT6A/10Gig Crimp Tool

Platinum Tools 12515 Tele-TitanXg™ CAT6A/10Gig Crimp Tool

Platinum Tools Tele-TitanXg™ Cat6A/10Gig Crimp Tool is only compatible with RJ45 CAT6A 10Gig Shielded Connector 106190
View instruction sheet

Streaming media whether data, audio or video, is on a sharp rise and users are demanding more bandwidth. That means bigger cable, commonly referred to as CAT6E, CAT6A and CAT7, and usually shielded. For maximum performance, connector and crimp tool choice is critical. Our CAT6A/10Gig termination system not only meets, but exceeds these requirements.