PELICAN 1040 MICRO CASE

1040 PELICAN

PELICAN 1040 MICRO CASE

Pelican 1040 Micro Case – The easy open latch makes access to your gear fast and easy. A thick rubber liner was added for extra protection and also doubles as o-ring seal. It’s stainless steel hardware resists rust and stands up to harsh abuse. Water resistant, crushproof, and dust proof. Includes a carabineer for easy attachment to your gear.

 

Inside Length 6.5 in
Inside Width 3.87 in
Inside Depth 2.125 in
Exterior Depth 2.12 in
Exterior Width 5.06 in
Exterior Length 7.5 in
Inside Height 1.75 in
Exterior Height 2.12 in


PELICAN 1060 MICRO CASE

1060

PELICAN 1060 BLACK MICRO CASE

Pelican 1060 Micro Case – The easy open latch makes access to your gear fast and easy. A thick rubber liner was added for extra protection and also doubles as o-ring seal. It’s stainless steel hardware resists rust and stands up to harsh abuse. Water resistant, crushproof, and dust proof. Includes a carabineer for easy attachment to your gear.

  • Exterior Dimensions: 9.37in x 5.56in x 2.62in
  • Interior Dimensions: 8.25in x 4.25in x 2.25in
  • Lid Depth: 0.69in
  • Bottom Depth: 1.44in
  • Total Depth: 2.13in
  • Interior Cubic Volume: 0.05 cu ft
  • Weight: 1.03 lbs
  • Weight without foam: 1 lbs
  • Buoyancy Max: 2.49 lbs
  • Range Temperature: -10 to 199.4 deg F

 



PELICAN 1060 MICRO CASE

1060 PELICAN

PELICAN 1060 YELLOW MICRO CASE

Pelican 1060 Micro Case – The easy open latch makes access to your gear fast and easy. A thick rubber liner was added for extra protection and also doubles as o-ring seal. It’s stainless steel hardware resists rust and stands up to harsh abuse. Water resistant, crushproof, and dust proof. Includes a carabineer for easy attachment to your gear.

  • Exterior Dimensions: 9.37in x 5.56in x 2.62in
  • Interior Dimensions: 8.25in x 4.25in x 2.25in
  • Lid Depth: 0.69in
  • Bottom Depth: 1.44in
  • Total Depth: 2.13in
  • Interior Cubic Volume: 0.05 cu ft
  • Weight: 1.03 lbs
  • Weight without foam: 1 lbs
  • Buoyancy Max: 2.49 lbs
  • Range Temperature: -10 to 199.4 deg F

 



Pelican 1200 Case

Pelican 1200 Case

Pelican 1200 Case

1200 Case
Interior Dimensions:
9.25″ x 7.12″ x 4.12″ (23.5 x 18.1 x 10.5 cm)
  • Watertight, crushproof, and dust proof
  • Easy open Double Throw latches
  • Open cell core with solid wall design – strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Stainless steel hardware
  • Pick N Pluck™ with convoluted lid foam
  • Lifetime Guarantee of Excellence

BODY: Polypropylene
FOAM: 1.3 lb Polyurethane
LATCH: ABS
PURGE BODY: ABS
LID O-RING: Polymer
PURGE VENT: 3 Micron Hydrophobic Non-Woven PET
PINS: Stainless Steel
PURGE O-RING: 70 Shore Nitrile

CERTIFICATES

1200_IP67.pdfDOWNLOAD
DEF_STAN_81-41.pdfDOWNLOAD


Pelican 1300 Case

Pelican 1300 Case

Pelican 1300 Case

1300 Case
Interior Dimensions:
9.17″ x 7.00″ x 6.12″ (23.3 x 17.8 x 15.5 cm)
  • Watertight, crushproof, and dust proof
  • Easy open Double Throw latches
  • Open cell core with solid wall design – strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Stainless steel hardware
  • Pick N Pluck™ with convoluted lid foam
  • Lifetime Guarantee of Excellence

BODY: Polypropylene
FOAM: 1.3 lb Polyurethane
LATCH: ABS
PURGE BODY: ABS
LID O-RING: Polymer
PURGE VENT: 3 Micron Hydrophobic Non-Woven PET
PINS: Stainless Steel
PURGE O-RING: 70 Shore Nitrile

CERTIFICATES

1300_IP67.pdfDOWNLOAD
DEF_STAN_81-41.pdfDOWNLOAD


Pelican 1400 Case

Pelican 1400 Case

Pelican 1400 Case

1400 Case
Interior Dimensions:
11.81″ x 8.87″ x 5.18″ (30 x 22.5 x 13.2 cm)
  • Watertight, crushproof, and dust proof
  • Easy open Double Throw latches
  • Open cell core with solid wall design – strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Stainless steel padlock protectors
  • Comfortable rubber over-molded handle
  • Stainless steel hardware
  • Pick N Pluck™ with convoluted lid foam
  • Personalized nameplate service available
  • Lifetime Guarantee of Excellence

BODY: Polypropylene
FOAM: 1.3 lb Polyurethane
LATCH: ABS
PURGE BODY: ABS
LID O-RING: Polymer
PURGE VENT: 3 Micron Hydrophobic Non-Woven PET
PINS: Stainless Steel
PURGE O-RING: 70 Shore Nitrile

CERTIFICATES

1400_IP67.pdfDOWNLOAD
DEF_STAN_81-41.pdfDOWNLOAD


PELICAN 1430 CASE WITH FOAM

1430 PELICAN

PELICAN 1430 BLACK CASE WITH FOAM

Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

  • Unique top loading design
  • Open cell core with solid wall design – strong, light weight
  • Comfortable rubber over-molded handle
  • 3 level Pick N Pluck™ with convoluted lid foam
  • Easy open double-throw latches
  • Stainless steel hardware and padlock protectors
  • Automatic pressure equalization valve – balances interior pressure, keeps water out
  • O-ring seal
  • Optional shoulder strap available
  • Lifetime Guarantee of Excellence
DIMENSIONS
Interior (L×W×D)
13.56 x 5.76 x 11.70 in (34.4 x 14.6 x 29.7 cm)
Exterior (L×W×D)
16.40 x 8.71 x 13.15 in (41.7 x 22.1 x 33.4 cm)
MEASUREMENTS
Lid Depth
2.00″ (5.1 cm)
Bottom Depth
9.70″ (24.6 cm)
Total Depth
11.7″ (29.7 cm)
Int Volume
0.53 ft³ (0.015 m³)
Padlock Hole Diameter
0.31″ (0.8 cm)
WEIGHTS
Weight With Foam
6.50 lbs (2.9 kg)
Weight Empty
5.60 lbs (2.5 kg)
Buoyancy
59.00 lbs (26.8 kg)
MATERIALS
Body Material
Polypropylene
Latch Material
ABS
O-Ring Material
Polymer
Pins Material
Stainless Steel
Foam Material
1.3 lb Polyurethane
Purge Body Material
ABS
Purge Vent Material
3 Micron Hydrophobic Non-Woven
TEMPERATURES
Minimum Temperature
-40° F (-40 ° C)
Maximum Temperature
210° F (99 ° C)
APPROVALS
Certifications
IP67   /  Def Stan 81-41


Pelican 1440 Top Loader Case

Pelican 1440 Top Loader Case

Pelican 1440 Top Loader Case

1440 Top Loader Case
Interior Dimensions:
17.10″ x 7.50″ x 16.00″ (43.4 x 19 x 40.6 cm)
  • Retractable extension handle
  • Strong polyurethane wheels with stainless steel bearings
  • Easy open Double Throw latches
  • Open cell core with solid wall design – strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Stainless steel padlock protectors
  • Comfortable rubber over-molded handle
  • Pick N Pluck™ with convoluted lid foam
  • Lifetime Guarantee of Excellence
  • Watertight, crushproof, and dust proof

CERTIFICATES

1440_DEF_STAN_81-41.pdfDOWNLOAD
1440_IP67.pdfDOWNLOAD


Pelican 1450 Case

Pelican 1450 Case

Pelican 1450 Case

1450 Case
Interior Dimensions:
14.62″ x 10.18″ x 6.00″ (37.1 x 25.8 x 15.2 cm)
  • Watertight, crushproof, and dust proof
  • Easy open Double Throw latches
  • Open cell core with solid wall design – strong, light weight
  • O-ring seal
  • Automatic Pressure Equalization Valve
  • Comfortable rubber over-molded handle
  • Stainless steel hardware and padlock protectors
  • Pick N Pluck™ with convoluted lid foam
  • Personalized nameplate service available
  • Lifetime Guarantee of Excellence

BODY: Polypropylene
FOAM: 1.3 lb Polyurethane
LATCH: ABS
PURGE BODY: ABS
LID O-RING: Polymer
PURGE VENT: 3 Micron Hydrophobic Non-Woven PET
PINS: Stainless Steel
PURGE O-RING: 70 Shore Nitrile

CERTIFICATES

1450_IP67.pdfDOWNLOAD
DEF_STAN_81-41.pdfDOWNLOAD


PELICAN 1470 PROTECTOR LAPTOP CASE

1470 PELICAN

PELICAN 1470 BLACK PROTECTOR LAPTOP CASE

Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

 

  • Double safety locking latches with keys
  • Pick N Pluck™ with convoluted lid foam
  • Open cell core with solid wall design – strong, light weight
  • Comfortable rubber over-molded handle
  • Automatic pressure equalization valve – balances interior pressure, keeps water out
  • O-ring seal
  • Stainless steel hardware
  • Personalized nameplate service available
  • Lifetime Guarantee of Excellence
DIMENSIONS
Interior (L×W×D)
15.70 x 10.70 x 3.87 in (39.9 x 27.2 x 9.8 cm)
Exterior (L×W×D)
16.88 x 13.23 x 4.47 in (42.9 x 33.6 x 11.4 cm)
MEASUREMENTS
Lid Depth
1.47″ (3.7 cm)
Bottom Depth
2.40″ (6.1 cm)
Total Depth
3.87″ (9.8 cm)
Int Volume
0.38 ft³ (0.011 m³)
Padlock Hole Diameter
0.25″ (0.6 cm)
WEIGHTS
Weight With Foam
5.51 lbs (2.5 kg)
Weight Empty
4.28 lbs (1.9 kg)
Buoyancy
24.91 lbs (11.3 kg)
MATERIALS
Body Material
ABS
Latch Material
ABS
O-Ring Material
Polymer
Pins Material
Stainless Steel
Foam Material
1.3 lb Polyurethane
Purge Body Material
ABS
Purge Vent Material
3 Micron Hydrophobic Non-Woven
TEMPERATURES
Minimum Temperature
-40° F (-40 ° C)
Maximum Temperature
210° F (99 ° C)
APPROVALS
Certifications
MIL C-4150J


PELICAN 1490 PROTECTOR LAPTOP CASE

1500 PELICAN

PELICAN 1490 BLACK PROTECTOR LAPTOP CASE

Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

  • Fits notebook computers up to 17.3″ L x 11.0″ W x 3.3″ D (43.94 x 27.94 x 8.38 cm)
  • Double safety locking latches with keys
  • Pick N Pluck™ with convoluted lid foam
  • Open cell core with solid wall design – strong, light weight
  • Comfortable rubber over-molded handle
  • Automatic pressure equalization valve – balances interior pressure, keeps water out
  • O-ring seal
  • Stainless steel hardware
  • Personalized nameplate service available
  • Lifetime Guarantee of Excellence
DIMENSIONS
Interior (L×W×D)
17.75 x 11.37 x 4.12 in (45.1 x 28.9 x 10.5 cm)
Exterior (L×W×D)
19.87 x 13.93 x 4.68 in (50.5 x 35.4 x 11.9 cm)
MEASUREMENTS
Lid Depth
1.50″ (3.8 cm)
Bottom Depth
2.62″ (6.7 cm)
Total Depth
4.12″ (10.5 cm)
Int Volume
0.48 ft³ (0.014 m³)
Padlock Hole Diameter
0.25″ (0.6 cm)
WEIGHTS
Weight With Foam
6.50 lbs (2.9 kg)
Weight Empty
5.47 lbs (2.5 kg)
Buoyancy
41.00 lbs (18.6 kg)
MATERIALS
Body Material
ABS
Latch Material
ABS
O-Ring Material
Polymer
Pins Material
Stainless Steel
Foam Material
1.3 lb Polyurethane
Purge Body Material
ABS
Purge Vent Material
3 Micron Hydrophobic Non-Woven
TEMPERATURES
Minimum Temperature
-40° F (-40 ° C)
Maximum Temperature
210° F (99 ° C)


Pelican 1495CC1 Laptop Computer Case

Pelican 1495CC1 Laptop Computer Case

Pelican 1495CC1 Laptop Computer Case

1495CC1 Laptop Case
Interior Dimensions:
18.87″ x 13.12″ x 3.81″ (47.9 x 33.3 x 9.7 cm)
  • Fits up to 17″ laptops
  • 3 dial combination lock included
  • Nylon padded computer sleeve and accessories pouch
  • Lid organizer, shock absorbing tray, and padded shoulder strap
  • Fold down overmolded handle
  • Easy open Double Throw latches
  • Automatic Pressure Equalization Valve
  • Stainless steel padlock protectors
  • Lifetime Guarantee of Excellence
  • Watertight, crushproof, and dust proof
  • Combination Lock Information

 

CERTIFICATES

1495_DEF_STAN_81-41.pdfDOWNLOAD
1495_IP67.pdfDOWNLOAD


PELICAN 1500 PROTECTOR CASE

1500 PELICAN

PELICAN 1500 BLACK PROTECTOR CASE

Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.

Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.

 

  • Pick N Pluck™ with convoluted lid foam
  • Watertight, crushproof, and dustproof
  • Open cell core with solid wall design – strong, light weight
  • Comfortable rubber over-molded handle
  • Easy open double-throw latches
  • Stainless steel hardware and padlock protectors
  • Automatic pressure equalization valve – balances interior pressure, keeps water out
  • O-ring seal
  • Personalized nameplate service available
  • Lifetime Guarantee of Excellence
DIMENSIONS
Interior (L×W×D)
16.75 x 11.18 x 6.12 in (42.5 x 28.4 x 15.5 cm)
Exterior (L×W×D)
18.50 x 14.06 x 14.06 in (47 x 35.7 x 17.6 cm)
MEASUREMENTS
Lid Depth
1.81″ (4.6 cm)
Bottom Depth
4.31″ (10.9 cm)
Total Depth
6.12″ (15.5 cm)
Int Volume
0.66 ft³ (0.019 m³)
Padlock Hole Diameter
0.31″ (0.8 cm)
WEIGHTS
Weight With Foam
7.94 lbs (3.6 kg)
Weight Empty
7.13 lbs (3.2 kg)
Buoyancy
50.00 lbs (22.7 kg)
MATERIALS
Body Material
Polypropylene
Latch Material
ABS
O-Ring Material
Polymer
Pins Material
Stainless Steel
Foam Material
1.3 lb Polyurethane
Purge Body Material
ABS
Purge Vent Material
3 Micron Hydrophobic Non-Woven
TEMPERATURES
Minimum Temperature
-40° F (-40 ° C)
Maximum Temperature
210° F (99 ° C)


PELICAN 1506TSA TSA LOCK

1506TSA PELICAN

PELICAN 1506TSA TSA LOCK

The Pelican 1506TSA Lock is a 3 digit combination lock that is TSA approved. This allows the checked luggage to remain protected, because the TSA baggage screeners have special codes and tools which will unlock it. They relock the bag after inspection. While designed for Pelican cases, this lock obviously will work with many other cases. It has a stainless steel hasp that does not corrode.

– Three digit combination lock
– TSA (Transport Security Administration) approved
– Works with TSA Pass Key for worry free travel
– Stainless steel hasp that does not corrode
– Compatible with all Pelican cases


Pelican 1510 Carry-On Case

Pelican 1510 Carry-On Case

  • Waterproof, Crushproof, Dustproof Case
  • Made of Ultra High Impact Copolymer
  • FAA-Approved Maximum Carry-On Size
  • Telescoping Handle & Wheels
  • Durable Stainless Steel Hardware
  • Automatic Pressure Equalization Valve
  • Three-Piece Foam Set is Included
  • Retractable Extension Handle
  • Three-Dial TSA Combination Lock
  • Desiccant Silica Gel Pack
  • INTERIOR (L X W X D)
    19.75″ x 11.00″ x 7.60″ (50.2 x 27.9 x 19.3 cm)
  • EXTERIOR (L X W X D)
    22.00″ x 13.81″ x 9.00″ (55.9 x 35.1 x 22.9 cm)
    • BODY: Polypropylene
    • LATCH: ABS
    • O-RING: Polymer
    • PINS: Stainless Steel
    • FOAM: 1.3 lb Polyurethane
    • PURGE BODY: ABS
    • PURGE VENT: 3 Micron Hydrophobic Non-Woven
    • PURGE O-RING: 70 Shore Nitrile
    • LID DEPTH:  1.79″ (4.5 cm)
    • BOTTOM DEPTH:  5.79″ (14.7 cm)
    • TOTAL DEPTH:  7.58″ (19.3 cm)
    • INT VOLUME:  0.96 ft³ (0.027 m³)
    • WEIGHT WITH FOAM:  13.60 lbs (6.2 kg)
    • WEIGHT WITHOUT FOAM:  11.99 lbs (5.4 kg)
    • BUOYANCY:  64.15 lbs (29.1 kg)
    • MINIMUM TEMPERATURE:  -40° F (-40 ° C)
    • MAXIMUM TEMPERATURE:  210° F (99 ° C)
    • WHEELS:  2
    • EXTENDABLE HANDLE:  yes
    • CERTIFICATIONS: IP67   /  STANAG 4280   /  Def Stan 81-4
  • Hard rolling travel carry-on case


PELICAN 1520 MEDIUM PROTECTOR CASE

1520 PELICAN

PELICAN 1520 MEDIUM PROTECTOR CASE

Pelican 1520 Medium Protector Case with Pick N Pluck Foam Interior is Watertight, Crushproof, Dustproof and Guaranteed for Life. Carrying Case with easy open Double Throw latches. The Pick N Pluck Foam allows you to create custom foam cushioning without cutting. Conforms to items in all directions. Easily pull out perforated foam squares to match product’s shape.

Interior Dimensions: 18.06 x 12.89 x 6.72 in.
Exterior Dimensions: 19.78 x 15.77 x 7.41 in.
Base & Lid Dimensions: Base: 4.93 in. | Lid: 1.79 in.
Weight: 9.35 Lbs.
Wheels: No Wheels



PELICAN 1550 PROTECTOR CASE

1550 PELICAN

PELICAN 1550 BLACK PROTECTOR CASE

  • Watertight, crushproof, and dustproof
  • 2 level Pick N Pluck™ with convoluted lid foam
  • Open cell core with solid wall design – strong, light weight
  • Comfortable rubber over-molded handle
  • Easy open double-throw latches
  • Stainless steel hardware and padlock protectors
  • Automatic pressure equalization valve – balances interior pressure, keeps water out
  • O-ring seal
  • Personalized nameplate service available
  • Lifetime Guarantee of Excellence
DIMENSIONS
Interior (L×W×D)
18.63 x 14.18 x 7.72 in (47.3 x 36 x 19.6 cm)
Exterior (L×W×D)
20.66 x 17.20 x 8.40 in (52.5 x 43.7 x 21.3 cm)
MEASUREMENTS
Lid Depth
1.75″ (4.4 cm)
Bottom Depth
5.87″ (14.9 cm)
Total Depth
7.62″ (19.4 cm)
Int Volume
1.18 ft³ (0.033 m³)
Padlock Hole Diameter
0.31″ (0.8 cm)
WEIGHTS
Weight With Foam
11.90 lbs (5.4 kg)
Weight Empty
10.58 lbs (4.8 kg)
Buoyancy
69.89 lbs (31.7 kg)
MATERIALS
Body Material
Polypropylene
Latch Material
ABS
O-Ring Material
Polymer
Pins Material
Stainless Steel
Foam Material
1.3 lb Polyurethane
Purge Body Material
ABS
Purge Vent Material
3 Micron Hydrophobic Non-Woven


Pelican 1560 Large Protector Case

Pelican 1560 Large Protector Case

Made in the USA, these tough cases are designed with an automatic purge valve that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware. Our simple and strong double-throw latches keep the lid closed in the roughest handling.

  • Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
  • Comfortable rubber over-molded top and side handles
  • Stainless steel hardware and padlock protectors
  • 2 level Pick N Pluck™ with convoluted lid foam
  • Lifetime Guarantee of Excellence
  • Watertight, crushproof, and dustproof
  • Retractable extension handle
  • Strong polyurethane wheels with stainless steel bearings
  • Easy open Double Throw latches
  • Open cell core with solid wall design – strong, light weight
  • O-ring seal
  • INTERIOR (L X W X D)
    19.92″ x 14.98″ x 9.00″ (50.6 x 38 x 22.9 cm)
  • EXTERIOR (L X W X D)
    22.07″ x 17.92″ x 10.42″ (56.1 x 45.5 x 26.5 cm)
  • BODY: Polypropylene
  • LATCH: ABS
  • O-RING: Polymer
  • PINS: Stainless Steel
  • FOAM: 1.3 lb Polyurethane
  • PURGE BODY: ABS
  • PURGE VENT: 3 Micron Hydrophobic Non-Woven
  • PURGE O-RING: 70 Shore Nitrile
  • LID DEPTH:  2.00″ (5.1 cm)
  • BOTTOM DEPTH:  7.00″ (17.8 cm)
  • TOTAL DEPTH:  9″ (22.9 cm)
  • INT VOLUME:  1.55 ft³ (0.044 m³)
  • WEIGHT WITH FOAM:  20.00 lbs (9.1 kg)
  • WEIGHT WITHOUT FOAM:  17.00 lbs (7.7 kg)
  • BUOYANCY:  115.00 lbs (52.2 kg)
  • MINIMUM TEMPERATURE:  -40° F (-40 ° C)
  • MAXIMUM TEMPERATURE:  210° F (99 ° C)
  • WHEELS:  2
  • EXTENDABLE HANDLE:  yes
  • CERTIFICATIONS: IP67   /  STANAG 4280   /  Def Stan 81-41