NTE 54-636 SWITCH BROWN MAGNETIC ALARM REED SPST
NTE 54-636 SWITCH BROWN MAGNETIC ALARM REED SPST :
SWITCH BROWN MAGNETIC ALARM REED SPST-NO 18 INCH LEADS ADHESIVE AND SCREW MOUNT 2 PIECE UNIT View Specs
NTE 54-062 SWITCH ROCKER MINIATURE SNAP-IN SPST OFF-NONE-ON 16A 125VAC
NTE 54-062 SWITCH ROCKER MINIATURE SNAP-IN SPST OFF-NONE-ON 16A 125VAC :
SWITCH ROCKER MINIATURE SNAP-IN SPST OFF-NONE-ON 16A 125VAC VISI RED ACTUATOR .250 INCH QC TERMINAL
View Specs
2:1 Ratio Heat Shrink Tubing, Spool – White
2:1 Ratio Heat Shrink Tubing, Spool – White
3/64”, 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2”
Color: White
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
NTE Heatshrink Tubing Technical Brochure
HEATSHRINK
NTE 54-645-B SWITCH ROCKER SPST ON-NONE-OFF ILLUMINATED BLUE DOT 20A
NTE 54-645-B SWITCH ROCKER SPST ON-NONE-OFF ILLUMINATED BLUE DOT 20A :
SWITCH ROCKER SPST ON-NONE-OFF ILLUMINATED BLUE DOT 20A 12VDC SQUARE FACE ROUND HOLE .187 INCH TERM View Specs
NTE 54-574 SWITCH ILLUMINATED DUCK BILL TOGGLE SPST ON-NONE-OFF 20A
NTE 54-574 SWITCH ILLUMINATED DUCK BILL TOGGLE SPST ON-NONE-OFF 20A :
SWITCH ILLUMINATED DUCK BILL TOGGLE SPST ON-NONE-OFF 20A 12VDC BLUE 12V NEON LAMP .250 IN QC TERM View Specs
NTE 54-240W SWITCH WATERPROOF ILLUMINATED ROCKER SPDT 20A ON-OFF-ON RED-GREEN 110V
NTE 54-240W SWITCH WATERPROOF ILLUMINATED ROCKER SPDT 20A ON-OFF-ON RED-GREEN 110V
SWITCH WATERPROOF ILLUMINATED ROCKER SPDT 20A ON-OFF-ON RED/GREEN 110V NEON LAMP .187 QC TERMINALS
View Specs
2:1 Ratio Heat Shrink Tubing, 4ft. Lengths – Blue
2:1 Ratio Heat Shrink Tubing 4ft. Lengths – Blue
1/16″, 3/32”, 1/8”, 3/16”, 1/4”, 3/8”, 1/2″, 3/4″, 1”, 1-1/2”, 2″
Our heat shrink is a flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications. Our tubing is typically used as shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering.
- 125 deg. C
- 600V
- Thin wall
- 2:1 ratio
- Color: Blue
Heatshrink
NTE 69-A2 3528 SIZE LED CONNECTOR WITH 5.75″ WIRE LEADS
NTE 69-A2 3528 SIZE LED CONNECTOR WITH 5.75 INCH WIRE LEADS-ADD TO CUT LED STRIPS- FOR 300 LEDS per REEL ONLY
View brochure
NTE 54-650 SWITCH PUSHBUTTON SPST ON-Momentary(OFF) 10A 250VAC 15A
NTE 54-650 SWITCH PUSHBUTTON SPST ON-Momentary(OFF) 10A 250VAC 15A
SWITCH PUSH BUTTON SPST ON-(OFF) 10A 250VAC 15A 125VAC SCREW TERMINALS View Specs
NTE 54-603 SWITCH BAT HANDLE TOGGLE DPDT ON-NONE-ON 20A
NTE 54-603 SWITCH BAT HANDLE TOGGLE DPDT ON-NONE-ON 20A :
SWITCH BAT HANDLE TOGGLE DPDT ON-NONE-ON 20A 125VAC SCREW TERMINALS .500 INCH MOUNTING HOLE View Specs
NTE 54-387 SWITCH ILLUMINATED ROCKER SPST 10A 125VAC ON-NONE-OFF
NTE 54-387 SWITCH ILLUMINATED ROCKER SPST 10A 125VAC ON-NONE-OFF
SWITCH ILLUMINATED ROCKER SPST 10A 125VAC ON-NONE-OFF BLACK ACTUATOR W/RED LED .250 QC TERMINALS View Specs
NTE 54-250W SWITCH-WATERPROOF ROCKER DPDT Momentary(ON)-OFF-Momentary(ON) 20AMP 125 VOLT
NTE 54-250W SWITCH-WATERPROOF ROCKER DPDT Momentary(ON)-OFF-Momentary(ON) 20AMP 125 VOLT
SWITCH-WATERPROOF ROCKER DPDT (ON)-OFF-(ON) 20AMP 125 VOLT BLACK IP 66 .187 INCH QUICK CONNECT TERMINALS
View Specs
NTE 54-241W SWITCH WATERPROOF ILLUMINATED ROCKER SPDT 20A ON-OFF-ON RED-GREEN 12V
NTE 54-241W SWITCH WATERPROOF ILLUMINATED ROCKER SPDT 20A ON-OFF-ON RED-GREEN 12V
SWITCH WATERPROOF ILLUMINATED ROCKER SPDT 20A ON-NONE-ON RED/GREEN 110V NEON LAMP .187 QC TERMINALS
View Specs
NTE 54-230W SWITCH WATERPROOF ILLUMINATED ROCKER SPST 20A ON-NONE-OFF RED 110V
NTE 54-230W SWITCH WATERPROOF ILLUMINATED ROCKER SPST 20A ON-NONE-OFF RED 110V :
SWITCH WATERPROOF ILLUMINATED ROCKER SPST 20A ON-NONE-OFF RED 110V NEON LAMP .187 QC TERMINALS
View Specs
NTE 54-228W SWITCH WATERPROOF NON-ILLUMINATED ROCKER SPST 20A ON-OFF-ON
NTE 54-228W SWITCH WATERPROOF NON-ILLUMINATED ROCKER SPST 20A ON-OFF-ON :
SWITCH WATERPROOF NON-ILLUMINATED ROCKER SPST 20A ON-OFF-ON .187 QC TERMINALS
View Specs
NTE 54-076 SWITCH SNAP-IN ROCKER DPST ON-NONE-OFF 8A 125VAC
NTE 54-076 SWITCH SNAP-IN ROCKER DPST ON-NONE-OFF 8A 125VAC :
SWITCH SNAP-IN ROCKER DPST ON-NONE-OFF 8A 125VAC .187 INCH QUICK CONNECT TERMINALS
View Specs
ECG J-HARW-1 Hot Air Rework Station
ECG J-HARW-1 Hot Air Rework Station
The J−HARW−1 Hot Air Rework Station can be used for rework and soldering operations on a broad range of components as well as for heat shrinking, drying, paint removal, conformal coating removal, pre−heating, defrosting, glue soldering, and much, much more. This unit is especially suited for rework operations on in−line sockets.
Technical Parameters:
Rated Voltage Range: 110V to 127VAC, 60Hz
Rated Power: 700W
Display Type: LED Nixie Tube
Temperature Range: 212 to 896 F ( 100
Operating Ambient Temperature: 32 to 480 C) to 104 F (0 to 40
Air Delivery: Brushless Motor with Smooth Air Delivery
Air Volume: 120L Min. C)
Main Unit Dimensions: 6.693 (170mm) L x 3.740 (95mm) W x 5.118 (130mm) H
Features:
Adjustable Temperature
C or F Selectable Temperature Display
Air Volume Adjustment Knob
LED Display Tubes
Standby Mode .197 (5mm)
Smart Technology Places Unit in Cool Down Mode when Heat gun is Placed back in Holder
Includes 3 Different Size Nozzles
ESD Safe
Rapid Heat−Up
NTE 54-623 SWITCH BAT HANDLE TOGGLE SPDT ON-OFF-ON 20A
NTE 54-623 SWITCH BAT HANDLE TOGGLE SPDT ON-OFF-ON 20A :
SWITCH BAT HANDLE TOGGLE SPDT ON-OFF-ON 20A 125VAC .250 QC TERMINALS .500 INCH MOUNTING HOLE View Specs