Neutrik NA-MB-KIT Mounting Bracket Kit for NA2-IO-DLINE

Neutrik NA-MB-KIT Mounting Bracket Kit for NA2-IO-DLINE

The adapter bracket set supports the assembly of one NA2-IO-DLINE interface inside a floor box or below tables. A stepless angle from -90° to 90° can be set. All necessary screws are included in the set.



Neutrik NYS231 3.5mm Stereo Plug, Metal

Neutrik NYS231 3.5mm Stereo Plug, Metal

Title
NYS231
Connection Type
Plug
Gender
male
Electrical
Dielectric strength
0.5 kVdc
Insulation resistance
≥ 1 GΩ
Rated current
depends on mated connector
Contact resistance
depends on mated connector
Mechanical
Cable O.D.
4 mm
Insertion force
≤ 20 N
Withdrawal force
≥ 10 N
Lifetime
1000 mating cycles
Material
Contact plating
Nickel
Contacts
Brass (CuZn39Pb3)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
SnCe plated, crimp type
Insulation
Thermoplastic
Environmental
Solderability
Complies with IEC 68-2-20
Temperature range
-25 °C to 70 °C


Neutrik NYS228 1/4″ Stereo Phone Plug

Neutrik NYS228 1/4″ Stereo Phone Plug

 

Title
NYS228
Connection Type
Plug
Gender
male
Electrical
Dielectric strength
0.5 kVdc
Insulation resistance
≥ 1 GΩ
Contact resistance
depends on mating connector
Rated current
depends on mating connector
Mechanical
Cable O.D.
≤ 6 mm
Lifetime
1000 mating cycles
Wiresize
24 AWG
Material
Contact plating
2 µm Ni
Contacts
Brass (CuZn39Pb3)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Crimp type SnCe plated
Insulation
Thermoplastic


Neutrik NJ3FP6C-BAG Locking 1/4″ Phone Jack

Neutrik NJ3FP6C-BAG Locking 1/4″ Phone Jack

The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab. Standard D size front panel appearance. Selectable grounding options.

  • Securely locking chassis jack
  • Mates with all mono and stereo plugs specified acc. EIA RS-453 (A-gauge)
  • Selectable grounding options: standard isolated, to get a sleeve/panel connection red isolator on lateral screw must be removed
  • Dimensionally compatible with D Series (31 x 26 mm)
  • Solder terminals