Neutrik NAC3FX-W-TOP Locking Female Cable Connector, Screw Terminals

Cable end – powerCON TRUE1 TOP – female – power out – screw terminals – IP 65 and UV rated. The powerCON TRUE1 TOP is a locking 16 A true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

Neutrik NAC3FPX Appliance Outlet Connector, 1/4” Flat Tab Terminals

Neutrik NAC3FCB Lockable Cable Connector, Power-Out, Screw Terminals, Grey

Cable end – powerCON blue / grey – power out (grey). The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

Neutrik NAC3FC-HC PowerCON 32 A Cable Connector

Cable end – powerCON – 32 Amp high current (black) – screw terminals. The 32 A powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations. The connectors comprise of contacts for phase, neutral and protective earth (ground) conductors rated for currents up to 32 A and for voltages up to 250V.

Neutrik NA3MP 3 Pole XLR Male to Stereo 1/4″ Plug

Adapter – 3 pin male XLR to 1/4″ stereo plug – pre-wired
Tip, Ring, Sleeve Contact

Neutrik NA3MM 3 Pole XLR Male to 3 Pole XLR Male (Adapter)

Gender Conversion Adapter – 3 pin male XLR to 3 pin male XLR – pre-wired

Neutrik NA3FF 3 Pole XLR Female to 3 Pole XLR Female (Adapter)

Gender Conversion Adapter – 3 pin female XLR to 3 pin female XLR – pre-wired

Neutrik NA2MBNC 3 Pole XLR Male to BNC Socket (Adapter)

Adapter – 3 pin male XLR to BNC jack – pre-wired. Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground

Neutrik NA2FBNC 3 Pole XLR Female to BNC Socket (Adapter)

Adapter – 3 pin female XLR to BNC jack – pre-wired. Wired according to IEC 268-12:
Pin 2: signal
Pin 1 and 3: connected to ground

Neutrik BSX-9-WHITE Bushing For Color Coding – White

Colored boot – X series -White

Neutrik BSX-5-GREEN Bushing For Color Coding – Green

Colored boot – X series -Green

Neutrik 203M Single Gang Dual Wallplate With Two NC3MD-L-1 Receptacles

Wallplate – dual – NC3MD-L-1

Neutrik 203F Single Gang Dual Wallplate With Two NC3FD-L-1 Receptacles

Wallplate – dual – NC3FD-L-1

Neutrik 103F Single Gang Wallplate With One NC3FD-L-1 Receptacle

Wallplate – single – NC3FD-L-1

Neutrik NC5MX Cable End X Series 5 Pin Male – Nickel/Silver

Cable end X series 5 pin male – nickel/silver. The “industry standard” XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Neutrik NE8FDP RJ45 Feedthrough Receptacle

Neutrik NE8FDP RJ45 Feedthrough Receptacle

RJ45 feedthrough receptacle, D-shape metal flange with the latch lock, mounting screws included

The etherCON Series is a ruggedized and lockable RJ45 connector system, optimized for pro audio, video and lightning network applications. The chassis connectors are shaped to fit into standardized panels out of the entertainment industry.
The D-Series offers the most rugged design of the etherCON series and is perfectly suitable for panel mount and the installer market.

Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

Accommodates NE8MC* or any standard RJ45 plug
Approved latch lock system
Mountable from the front or rear of the panel
Complies with Cat 5e according to TIA / EIA 568B and ISO / IEC 11801 standard

Neutrik NAC3MM-1 PowerCON Coupler

Neutrik NAC3MM-1 PowerCON Coupler

powerCON NAC3MPA-1 (power in) – powerCON NAC3MPB-1 (power out), coupler for linking cables

Neutrik NAC3FCA Powercon Locking 3-Pole Power Connector

Neutrik NAC3FCA Powercon Locking 3-Pole Power Connector

The Neutrik NAC3FCA Powercon locking 3-Pole power connector is for mission-critical applications where current loads up to 20 Amps at 250 Volts (AC) are handled.