Neutrik NC3FX 3-pin Female XLR Connector

Neutrik NC3FX 3-pin Female XLR Connector

 

Black/silver

3 pole female cable connector with Nickel housing and silver contacts.

The “industry standard” XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

  • Unique Cage Design for Low Contact Resistance
  • Female Contact Incorporates a Solder Barrier to Prevent Solder Running Into the Contact Mating Area
  • Improved Chuck Type Strain Relief Provides Higher Pull-out Force and Makes Assembly Easier and Faster
  • Rugged zinc Diecast Shell, Longlasting and Dependable

 

Connection Type
XLR
Gender
female
Electrical
Capacitance between contacts
≤ 4 pF
Contact resistance
≤ 3 mΩ (inner)
Dielectric strength
1,5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
16 A
Rated voltage
< 50 V
Mechanical
Cable O.D.
3.5 – 8.0 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 2.5 mm²
Wiresize
max. 14 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethane
Contact plating
2 µm Ag over 2 µm Ni
Contacts
Bronze (CuSn8)
Insert
Polyamide (PA 6.6 30 % GR)
Locking element
St3K32 (latch) / Ck 67 (spring)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Polyacetal (POM)
Environmental
Approvals
UL
Flammability
UL 94 HB
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 °C to 80 °C



Neutrik NC4MX 4-Pin Male XLR Connector

Neutrik NC4MX 4-Pin Male XLR Connector:

1-24    $3.70

25-49  $3.56

50-99  $3.47

100    $3.34

Neutrik NC4MX 4-pin Male XLR Connector

4 pole male cable connector with Nickel housing and silver contacts.

The “industry standard” XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

 Features & Benefits
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components

Technical Information hide

Product
Title
NC4MX
Connection Type
XLR
Gender
male
Electrical
Capacitance between contacts
≤ 7 pF
Contact resistance
≤ 3 mΩ (inner)
Dielectric strength
1,5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
10 A
Rated voltage
50 V
Mechanical
Cable O.D.
3.5 – 8.0 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 1.5 mm²
Wiresize
max. 16 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethan
Contact plating
2 µm Ag over 2 µm Ni
Contacts
Brass (CuZn39Pb3)
Insert
Polyamide (PA 6.6 30 % GR)
Locking element
Zinc diecast (ZnAl4Cu1)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Polyacetal (POM)
Environmental
Approvals
UL
Flammability
UL 94 HB
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 °C to 80 °C



Neutrik NL4FX 4-Pole Speakon Female Cable End Connector

Neutrik NL4FX 4-Pole Speakon Female Cable End Connector

4 pole cable connector, chuck type strain relief, dark grey bushing

The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

Features & Benefits

  • Current rating 40 A rms continuous
  • Up to 50 A audio signal, duty cycle 50%
  • Only 3 parts, easy to assemble
  • High impact materials – long-lasting and reliable
  • Easy and extremely precise locking system “Quick Lock”
  • Improved grip on latch
  • 1 piece strain relief, chuck for 7 to 14.5 mm cable O.D.
  • Color coding possible
  • Improved screw-type termination for highest pull-out force
  • Integrated design guarantees “Made by Neutrik®”



Neutrik NAC3FCB PowerCon® Locking 3-Pole Power Connector

Neutrik NAC3FCB PowerCon® Locking 3-Pole Power Connector

Lockable cable connector, power-out, screw terminals, grey

The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

  • Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
  • Fast and easy twist lock latching system
  • Extremely robust and reliable
  • Ergonomic design
  • Unique Neutrik chuck type strain relief
  • Improved kink protection by two-component bushing
  • New bushing design avoids unintended opening
  • UL, cUL recognized components
    VDE certified
    SEV approved
  • Branded with unique hologram – guarantees genuine and authentic Neutrik product



Neutrik NC3MX Male 3 Pin XLR Connector

Neutrik NC3MX Male 3 Pin XLR Connector

Black/silver

  • Male Connector with Improved Locking Recess Without Window, more Stringent Housing Increases Durability
  • Boot with Polyurethane Gland gives High Protection to Cable Bending Stresses
  • Rugged Zinc Diecast Shell, Longlasting and Dependable
  • Internal Thread on Shell is Well Protected against Any Damage
Electrical
Capacitance between contacts
≤ 4 pF
Contact resistance
≤ 3 mΩ (inner)
Dielectric strength
1,5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
16 A
Rated voltage
< 50 V
Mechanical
Cable O.D.
3.5 – 8.0 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 2.5 mm²
Wiresize
max. 14 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethan
Contact plating
2 µm Ag
Contacts
Brass (CuZn39Pb3)
Insert
Polyamide (PA 6.6 30 % GR)
Locking element
Zinc diecast (ZnAl4Cu1)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Polyacetal (POM)
Environmental
Approvals
UL
Flammability
UL 94 HB
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 °C to 80 °C

 




Neutrik NC5MX Male 5 Pin XLR Connector

Neutrik NC5MX Male 5 Pin XLR Connector:

1-24    $4.59

25-49  $4.42

50-99  $4.30

100    $4.15

Neutrik NC5MX Male 5 Pin XLR Connector

5 pole male cable connector with Nickel housing and silver contacts.

The “industry standard” XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
Connection Type
XLR
Gender
male
Electrical
Capacitance between contacts
≤ 7 pF
Contact resistance
≤ 3 mΩ (inner)
Dielectric strength
1,5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
7,5 A
Rated voltage
< 50 V
Mechanical
Cable O.D.
3.5 – 8.0 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 1.0 mm²
Wiresize
max. 18 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethan
Contact plating
2 µm Ag
Contacts
Brass (CuZn39Pb3)
Insert
Polyamide (PA 6.6 30 % GR)
Locking element
Zinc diecast (ZnAl4Cu1)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Polyacetal (POM)
Environmental
Approvals
UL
Flammability
UL 94 HB
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 °C to 80 °C



Neutrik NAC3FCA PowerCon® 3 Pole AC Connector

Neutrik NAC3FCA PowerCon® 3 Pole AC Connector

Lockable cable connector, power-in, screw terminals, blue

The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

  • Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
  • Fast and easy twist lock latching system
  • Extremely robust and reliable
  • Ergonomic design
  • Unique Neutrik chuck type strain relief
  • Improved kink protection by two-component bushing
  • New bushing design avoids unintended opening
  • UL, cUL recognized components
    VDE certified
    SEV approved
  • Branded with unique hologram – guarantees genuine and authentic Neutrik product



Neutrik NP3RX Right Angle Phono Plug, Stereo

Neutrik NP3RX Right Angle Phono Plug, Stereo

3 pole right-angle 1/4″ professional phone plug, nickel contacts, nickel shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4″ plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

  • All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
  • Extra slim 1/4″ plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts – avoid hook up of tip contact



Neutrik NL8FC

Neutrik NL8FC 8-pole Speakon Connector

Neutrik NL8FC 8-pole Speakon Connector:

1-24    $10.84

25-49  $10.42

50-99  $10.15

100    $9.78

Neutrik NL8FC 8-pole Speakon Connector

8 pole cable connector with latch lock. Cable sleeve for cables 8 – 20 mm diameter. 30A continuous per contact.

The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination.

Features & Benefits

  • Current rating 30 A rms continuous
  • Reliable and robust, easy and fast to assemble
  • Contacts are touch proof and meet all safety requirements (IEC, UL, CSA)
  • Accurate and dependable twist lock latching system “Quick Lock”
  • High impact material for insert and housing, long-lasting and dependable
  • Chuck type strain relief system for secure clamping of cable



Neutrik NL4MP Speakon Chassis Mount Jack

Neutrik NL4MP Speakon Chassis Mount Jack

Neutrik NL4MP Speakon Chassis Mount Jack:

Neutrik NL4MP Speakon Chassis Mount Jack

4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16″ flat tabs

The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

Features & Benefits

  • Current rating 30 A rms
  • Glass reinforced materials make it extremely robust and dependable
  • Precise keyway for secure mating
  • Accurate twist lock latching system
  • Metal insert in locking area
  • Airtight design – optimized for speaker applications
  • Branded with unique hologram – guarantees genuine and authentic Neutrik product



Neutrik NC5FX Female 5-Pin XLR Connector

Neutrik NC5FX Female 5-Pin XLR Connector:

1-24    $6.55

25-49  $6.30

50-99  $6.14

100    $5.91

Neutrik NC5FX 5-pin Female XLR Audio Connector

5 pole female cable connector with Nickel housing and silver contacts.

The “industry standard” XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

 Features & Benefits
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components

Technical Information hide

Product
Title
NC5FX
Connection Type
XLR
Gender
female
Electrical
Capacitance between contacts
≤ 7 pF
Contact resistance
≤ 3 mΩ (inner)
Dielectric strength
1,5 kVdc
Insulation resistance
> 10 GΩ (initial)
Rated current per contact
7,5 A
Rated voltage
50 V
Mechanical
Cable O.D.
3.5 – 8.0 mm
Insertion force
≤ 20 N
Withdrawal force
≤ 20 N
Lifetime
> 1000 mating cycles
Wiresize
max. 1.0 mm²
Wiresize
max. 18 AWG
Wiring
Solder contacts
Locking device
Latch lock
Material
Boot
Polyurethan
Contact plating
2 µm Ag
Contacts
Brass (CuZn39Pb3)
Insert
Polyamide (PA 6.6 30 % GR)
Locking element
St3K32 (latch) / Ck 67 (spring)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Polyacetal (POM)
Environmental
Approvals
UL
Flammability
UL 94 HB
Standard compliance
IEC 61076-2-103
Protection class
IP 40
Solderability
Complies with IEC 68-2-20
Temperature range
-30 °C to 80 °C



Neutrik NRP1RU-2A Rack Panel 19 Inch 1RU

Neutrik NRP1RU-2A Rack Panel 19 Inch 1RU

With the NRP1RU-2A 1RU panel it’s possible to mount 2 of the NA2-IO-DLINE interfaces within a rack. 4 additional D-shape cut-outs allow the assembly of audio or network feed-throughs. The NA2-IO-DLINE can either be mounted from the front or from the rear side.

 

 




NA-MB-KIT Mounting Bracket Kit for NA2-IO-DLINE

NA-MB-KIT Mounting Bracket Kit for NA2-IO-DLINE

The adapter bracket set supports the assembly of one NA2-IO-DLINE interface inside a floor box or below tables. A stepless angle from -90° to 90° can be set. All necessary screws are included in the set.




Neutrik NA2-IO-DLINE Dante I/O Interface

Neutrik NA2-IO-DLINE Dante I/O Interface

Neutrik NA2-IO-DLINE Dante I/O Interface

Feed analog audio signals into the Dante­™ network while simultaneously receiving a mix from another Dante source with Neutrik’s NA2-IO-DLINE. This end-of-network breakout box allows two channels of audio to be integrated into a Dante network. Plus, this compact box converts a Dante stream into analog audio signals at the same time.

With lockable chassis connectors for both the audio and network connections, NA2-IO-DLINE is designed for harsh stage conditions. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

  • Connect analog audio equipment to a Dante network
  • Heavy duty adapter for rugged stage conditions
  • Lockable audio and network connections
  • Convert up to two analog line signals to a Dante network
  • Feed non Dante ready amplifiers, speakers or mixing desks with signals from the Dante network
  • Requires a Power over Ethernet switch or a PoE injector (802.3 af/at; class 1)
  • AES67 compliant
  • Rack mountable

NA-MB-KIT Mounting Bracket Kit for NA2-IO-DLINE

Neutrik NRP1RU-2A Rack Panel 19 Inch 1RU

Product brochure NA2-IO-DLINE

 




Neutrik NAC3FC-HC PowerCon® Female Cable Connector

Neutrik NAC3FC-HC  PowerCon® Female Cable Connector

The 32 A powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations. The connectors comprise of contacts for phase, neutral and protective earth (ground) conductors rated for currents up to 32 A and for voltages up to 250V.

  • 250 V ac, 32 A single-phase (for ambient temperatures up to 35°C)
  • Premating contact for protective earth
  • Fast and easy locking system to prevent unintentional disengagement
  • Cable O.D. Range: 8 – 20 mm
  • Wiring with screw-type terminals for wires 2.5 to 6.0 mm² (AWG 14 – 10)
  • Excellent cable handling and protection
  • Extremely robust and reliable
  • VDE, UL, cUL and JET approved



NYS228 1/4″ Stereo Phone Plug

NYS228 1/4″ Stereo Phone Plug

 

Title
NYS228
Connection Type
Plug
Gender
male
Electrical
Dielectric strength
0.5 kVdc
Insulation resistance
≥ 1 GΩ
Contact resistance
depends on mating connector
Rated current
depends on mating connector
Mechanical
Cable O.D.
≤ 6 mm
Lifetime
1000 mating cycles
Wiresize
24 AWG
Material
Contact plating
2 µm Ni
Contacts
Brass (CuZn39Pb3)
Shell
Zinc diecast (ZnAl4Cu1)
Shell plating
Nickel
Strain relief
Crimp type SnCe plated
Insulation
Thermoplastic



NJ3FP6C-BAG Locking 1/4″ Phone Jack

NJ3FP6C-BAG Locking 1/4″ Phone Jack

The 3 pole phone jack panel mount version provides stable and secure connections where accidental disconnect or shock and vibration may occur. It latches with standard A-gauge mono or stereo plugs. Plug locks-in automatically when mating and unlocks only by pressing red release tab. Standard D size front panel appearance. Selectable grounding options.

  • Securely locking chassis jack
  • Mates with all mono and stereo plugs specified acc. EIA RS-453 (A-gauge)
  • Selectable grounding options: standard isolated, to get a sleeve/panel connection red isolator on lateral screw must be removed
  • Dimensionally compatible with D Series (31 x 26 mm)
  • Solder terminals



Neutrik NP3C

Neutrik NP3C 1/4″ Phone Plug

Neutrik NP3C 1/4″ Phone Plug

3 pole 1/4″ professional phone plug, Nickel housing, Nickel contacts

Professional phone plug with robust metal shell and chuck type strain relief.

  • Rugged diecast metal shell
  • Chuck type strain relief for optimum cable protection
  • Precision machined one-piece contacts – avoid hook up of tip contact
  • Meets all prevailing standards
  • Male connector

Contact resistance

depends on mating connector mΩ (inner)

Dielectric strength

1 kVdc

Insulation resistance

> 2 GΩ (initial)

Rated current per contact

depends on mating connector A

Rated voltage

< 50 V

 

Cable O.D.

4 – 7 mm

Lifetime

> 1000 mating cycles

Wire size

1 mm²

Wire size

18 AWG

Wiring

Solder contacts

 

Bushing

Polyacetal (POM) PU

Contact plating

2 µm Ni (Su)

Contacts

Brass (CuZn39Pb3)

Insert

Polyamide (PA 6.6 30 % GR)

Shell

Zinc diecast (ZnAl4Cu1)

Shell plating

Nickel

Strain relief

Polyacetal (POM)

 

Standard compliance

IEC 60603-11 / EIA RS-453

Solderability

Complies with IEC 68-2-20

Temperature range

-20 °C to 65 °C