LEDs for Buttons-IGT Upright & Bartop Slot Machines

LEDs for Buttons-IGT Upright & Bartop Slot Machines

Replaces 73 incandescent bulbs in IGT uprights and bartops

T5 Wedge base

Lasts 5 years

Bright-but not too bright!

12V

This is an extremely popular product in Las Vegas casinos-email me to request samples.

Also available for slant tops

Related product: LED for Buttons-Slant Tops

 

 

 



LEDs for Buttons-658 Replacements in Slant Top Slot Machines

LEDs for Buttons-Slant Top Slot Machines

LEDs for Buttons-658 Replacements in Slant Top Slot Machines

Replaces 658 bulbs in slant top buttons

Lasts 5 years

Bright-but not too bright!

T-3-1/4 Wedge base

12V

This is an extremely popular product in Las Vegas casinos-email me to request samples.

Also available for uprights and bartops.

 

 

 



Kiesub CC25 Coin Comparator Cable

Kiesub CC25 Coin Comparator Cable

Kiesub CC25 Coin Comparator Cable

Upgrade for 5 cent and 25 cent Coin Mech unit



5mm THIN LED STRIP PURE WHITE, 16.4FT REEL 600 (3528) LEDS

5mm THIN LED STRIP PURE WHITE, 16.4FT REEL 600 (3528) LEDS

5mm THIN LED STRIP PURE WHITE, 16.4FT REEL 600 (3528) LEDS

Super bright!  Cut to fit the size you need from the 5 meter reel (16.4ft).

Replace CCFL with LEDs at much lower cost.  Lasts 50,000 hours or 5 years.

Color: Pure White

Voltage: 12V

LED: 3528

120 LEDs per meter

Self-adhesive tape



Kiesub CC100 Coin Comparator Cable

Kiesub CC100 Coin Comparator Cable

Upgrade for 1 dollar Coin Mech unit



25PA32 Belt Key Holder, Clip On, Silver

Belt Key Holder

25PA32 Belt Key Holder, Clip On, Silver

  • Item: Belt Key Holder
  • Type: Clip-On Belt Hook
  • Material: Spring Stainless Steel
  • Color: Silver
  • For Use With: Hold Keys
  • Ring Dia. (In.): 1 in
  • Package Quantity: 1
  • Includes: Split Key Ring

Use with:

K506-960 Keychain Single Clip

K506-960A Keychain Dual Clip



Outreach Pictures

Outreach Pictures

Here are some pictures to use in your Outreach.



Rechargeable Cordless Air Duster

Rechargeable Air Duster

Rechargeable Cordless Air Duster

FREE SHIPPING FOR $100 or more

Ultra-strong Airflow for Deep Cleaning of Microscopic Dust
Cleans Keyboards • Computer Cases • Camera Lenses
Printed Circuit Boards • Laptops and more
USB-C Fast Charging
Efficient and Safe

 



75% Alcohol Disinfecting Wipes, 50pc Pack, 48pc Box

75% Alcohol Wipes

75% Alcohol Disinfecting Wipes, 50pc Pack, 48pc Box

$5.99 ea x 48 = $287.52

  • 75% Alcohol
  • Kills 99.9% of germs
  • 6″x 8″
  • 50pc/pk
  • These come in 48 count boxes, must buy in multiples of 48

2-3 wk lead time

FREE SHIPPING

 

 

 



TF-600 Non-Contact Forehead Infrared Thermometer

IR THERMOMETER FRONT

TF-600 Non-Contact Forehead Infrared Thermometer

NEW LOWER PRICES:

1:   $39.94

2   $34.94

IN STOCK at Kiesub

  • Infrared technology
  • Contactless
  • Fahrenheit or Celsius
  • One second temperature measurement
  • Powered by 2 AAA batteries (not included)
  • Auto shutdown after 30 seconds of no use
  • 3-year warranty
  • FDA certified
  • IR Thermometer FDA Certificate

$100 min order required for free shipping

 

  • Faster Testing – Medical Grade Instant Digital Thermometer for kids, infants and adults in 1 SECOND, faster than conventional thermometers. It has a superior microchip and highly sensitive sensor which allows for highly accurate and rapid NO CONTACT scans of people as well as objects and rooms.
  • Higher Accurate Reading – Enjoy Hospital Grade Accuracy at your home, clinic or workplace in confidence due to the thoroughly tested reliability of your health care thermometer.
  • Amazing Versatility – The thermometer enables you to measure room or bottle temperature instantly with the press of a mode button.
  • Easy to Use – Baby, Toddler and Child-friendly quiet mode tympanic scanning with the push of a button allows you to take instant scans of infants and children without a beeping noise that may wake them. Celsius and Fahrenheit are easily and instantly switchable with an intuitive button.
  • Easy to Read – Temperature will be displayed on the LCD screen with clinically proven accuracy you can rely on. The back-lit LCD display shows you what the temperature is, even in the dark.
  • Batteries not included. Two AAA batteries required.
  • No Return Policy – Please note that due to necessary health and safety precautions, all sales of PPE products including these Non-Contact Infrared Thermometers are final. These items are non-refundable and non-returnable.
The actual product may differ slightly from image shown

 



SOLAR FLASHING LED PEDESTRIAN CROSSING SIGN

Yellow LED Flashing Pedestrian Crossing Sign

SOLAR FLASHING LED PEDESTRIAN CROSSING SIGN

Ped Xing Sign

Solar-powered yellow flashing LED lights around entire circumference of the sign for maximum visibility and safety.

Clearly designates all pedestrian crosswalks.

  • Can be used on both private and public properties.
  •  No electrical hookup.  Solar panel with battery backup to run all night long.
  •  Maintains bright light in prolonged cloudy days/nights.
  •  Maintenance-free system
  • Increased driver awareness for added safety (especially at night)
  • Manufactured by Kiesub Electronics in Las Vegas, NV.

Specifications:

15 watt solar panel @ 12vdc

Aluminum frame construction of solar module

Durable ABS sign housing

System supplied with “on board” programmable software to control:

DURATION ON (FLASH)

DURATION OFF

Battery condition indicator

 (RS232/USB interface)

Just plug into computer port, load software and adjust to desired settings.

12 volt rechargeable battery is enclosed in weatherproof housing

All mounting hardware included.

36 inches from top to bottom

Our system has been field tested under extreme heat, rain, and cloudy conditions over several months with no interruption in service or degradation of performance.

Meets MUTCD requirements.

  • Visible from 1,500 feet at night with diamond grade reflective surface.
  • Corrosion-resistant aluminum lasts for up to 12 years.

PED XING

Batteries and products containing batteries are not eligible for our Free Shipping promotion.

 



SOLAR-POWERED LED FLASHING STOP SIGN

SOLAR-POWERED LED FLASHING STOP SIGN

CONTACT US FOR PRICE

Red flashing LED lights around entire circumference of the sign for maximum visibility and safety.

  • Available for both private and public property applications.
  •  No electrical hookup.  Solar panel with battery backup to run all night long.
  •  Maintains bright light in prolonged cloudy days/nights.
  •  Maintenance-free system
  • Increased driver awareness for added safety (especially at night)
  • Manufactured by Kiesub Electronics in Las Vegas, NV.

Specifications:

15 watt solar panel @ 12vdc

Aluminum frame construction of solar module

Durable ABS sign housing

System supplied with “on board” programmable software to control:

DURATION ON (FLASH)

DURATION OFF

Battery condition indicator

 (RS232/USB interface)

Just plug into computer port, load software and adjust to desired settings.

3 year warranty

12 volt rechargeable battery is enclosed in weatherproof housing

All mounting hardware included.

Available in 24, 30, and 36 inch versions

Our system has been field tested under extreme heat, rain, and cloudy conditions over several months with no interruption in service or degradation of performance.

Meets MUTCD requirements.

ANSI Z535.4 STANDARD 36” STOP SIGN, diamond grade, is used in the assembly of the system.



110405 HDMI Extender Using Cat5e/6 Cable, Extends Up to 98ft

110405 HDMI Extender Using Cat5e/6 Cable, Extends Up to 98ft

Use this simple and effective HDMI® extender to send High Speed (1080p) HDMI® signals up to 30 meters (98 feet) over Cat5e/6 cable!

Most extenders are small boxes, which must be mounted and which require additional cables to use. While they can usually handle longer distances, if you don’t need to take the signal more than 30 meters, this simple pair of extender adapters is the right solution.

Each adapter plugs into your HDMI ports, with the sender in the source device and the receiver at the display. Then just run a pair of Cat5e/Cat6 cables between the adapters and you’re in business! You won’t need to provide external power – it gets the power it needs from the HDMI source device.

The adapters support up to 1080p resolutions and digital audio, including DTS® Digital, DTS-HD Master Audio™, and Dolby TrueHD™. They support up to 8-bits per channel (24-bit total) Deep Color and HDCP™ pass-through.

  • Up to 30 meter transmission distance over Cat5e/6 UTP cable
  • Supports up to 1080p resolution
  • Supports LPCM, DTS® Digital, DTS-HD Master Audio™, and Dolby TrueHD™ audio
  • Supports HDCP™ pass-through
  • 165 MHz/1.65 Gbps bandwidth
  • Supports 8-bits per channel (24-bits total) Deep Color
  • No setup required, just plug it in and start using it!
  • Uses IEEE-568B UTP wiring standard
  • Lightweight plastic construction
  • 8″ cable on each adapter
  • Gold-plated HDMI® connectors


HDMI Splitter 2 Port 1×2 v1.4

HDMI-12

HDMI Splitter 2 Port 1×2 v1.4

2-port 4K HDMITM splitter lets you share two HDMITM displays or projectors with an HDMITM-enabled audio / video source device, such as a computer, Blu-ray player or cable TV set-top box.

  • One HDMI Input, two HDMI outputs
  • Supports Full 3D and 4Kx2K resolution
  • Supports 340MHz/34Gbps per channel (102Gbps all channel) bandwidth
  • Supports 12bit per channel (36bit all channel) deep color
  • Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD)

 

 



Slotcharge® Dual USB Cell Phone & Tablet Charging Kit

Slotcharge® Dual USB Cell Phone & Tablet Charging Kit

Keep your players playing longer!

SLOTCHARGE® Dual USB Cell Phone and Tablet Charging Kits allow your players to plug their phones and tablets in at the machine, completely separate from the machine wiring.  NO GAMING APPROVAL REQUIRED.

Charges any type of phone and tablet, including iPhones and iPads.

-Charges only.  All data is blocked by power circuitry.

-Dual USB connector is easily installed into cabinet

-LED charge indicator

-Power supply plugs into a 120v receptacle or power strip

-Completely separate from the machine

-No Gaming approval required

-Compatible with both Android and iPhones

Each kit includes one each:

LED-lit Dual USB Connector with power management circuitry

Waterproof cap

Power supply

6ft USB cable

 

Kit Price: $22.95

Can be used on any cabinet, desk or panel.  For casinos, bars, restaurants, lounges, arcades, conference rooms, lobbies, waiting rooms or anywhere you have a flat surface and 120v power available.

Input: AC100 ~ 240V Output: DC5V 2.1A and 1A dual output. UL listed
USB 3.0 A to B Cables have gold- plated contacts that resist corrosion and provide rigidity
Foil and braid shielding minimizes EMI and RF interference
USB Connector: Black D-housing is dust- and water-resistant.  Comes with waterproof cap attached (not shown in picture)

 

 



KIE101-4 Battery Pack for Electronic Door Locks

KIE101-4 Battery Pack for Electronic Door Locks

Replaces Saflok 54490

Voltage: 6 Volts

Capacity: 2779mAh

Chemistry: Alkaline

Dimensions: 2.64″L x .60″W x 2.01″H

Weight: 3.6 oz

Termination: Connector (Wire Leads to Connector)



KIE-80DS CR80 Card Reader Cleaning Card (Box of 50)

KIE-80DS CR80 Card Reader Cleaning Card (Box of 50)

CR 80 Card Size = 3 3/8” x 2 1/8”* Pre-saturated and individually sealed* Reduces residue build-up without dismantling equipment

Quick, easy, inexpensive preventative maintenance

Contains 99.7% isopropanol (IPA)

For card readers – like credit card terminals, POS terminals, gas pump card readers, credit vending machines, security/time/badge readers, player tracking cards, ATMs, hotel door locks and more.

  • Save time and eliminate misreads with regular maintenance.
  • Save Money. Eliminate the need for a service call.

Just a swipe with the credit card cleaner removes dirt, magnetic oxides, lotions and other contaminants from concealed magnetic and optic sensors.

Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.

Check availability here.



876146001689 Fiber Optic Continuity Tester

876146001689 Fiber Optic Continuity Tester

F1-5000U

650nm LED Multimode Fiber Continuity Tester with 2.5mm Universal Adapter for SC, ST, FC

This Fiber Optic Continuity Tester is an excellent tool for fiber identification when multiple fibers are present. Simply connect your ST,FC, or SMA connector to the adapter and push the on/off button. The red LED light is transmitted down the fiber and escapes through the other end. The unit operates on two supplied AA batteries. The durable rubber packaging easily stores in a tool box. The continuity tester is a low cost, high quality unit.

This unit utilizes a red color LED to provide multimode only fiber continuity testing. It is excellent for continuity verification or simple fiber identification in an interconnect location. The flashlight shape and durable hard rubber casing make it very easy to work with.

This unit has a 2.5mm universal adapter which can accept all 2.5mm ferrule connectors such as FC, SC, ST and E2000.

Please note:

This unit can not replace the functions of a laser-based fault locator. Laser Fault Locators utilize a much higher powerful 650nm red laser to find breakage and bad bends in single mode and multimode fibers.

Battery: (2) AA Alkaline

Size 1.75” x 7.0”

Connector Styles 2.5um universal: ST SC FC SMA

(If needed, a hybrid patchcord and mating sleeve will enable efficient hook-ups to other connector styles.)