Use with:
Here are some pictures to use in your Outreach.
FREE SHIPPING FOR $100 or more
Ultra-strong Airflow for Deep Cleaning of Microscopic Dust
Cleans Keyboards • Computer Cases • Camera Lenses
Printed Circuit Boards • Laptops and more
USB-C Fast Charging
Efficient and Safe
1-11 $6..99
12 $5.99
In stock at Kiesub
NEW LOWER PRICES:
1: $39.94
2 $34.94
IN STOCK at Kiesub
$100 min order required for free shipping
The actual product may differ slightly from image shown
Ped Xing Sign
Solar-powered yellow flashing LED lights around entire circumference of the sign for maximum visibility and safety.
Clearly designates all pedestrian crosswalks.
Specifications:
15 watt solar panel @ 12vdc
Aluminum frame construction of solar module
Durable ABS sign housing
System supplied with “on board” programmable software to control:
DURATION ON (FLASH)
DURATION OFF
Battery condition indicator
(RS232/USB interface)
Just plug into computer port, load software and adjust to desired settings.
12 volt rechargeable battery is enclosed in weatherproof housing
All mounting hardware included.
36 inches from top to bottom
Our system has been field tested under extreme heat, rain, and cloudy conditions over several months with no interruption in service or degradation of performance.
Meets MUTCD requirements.
PED XING
Batteries and products containing batteries are not eligible for our Free Shipping promotion.
CONTACT US FOR PRICE
Red flashing LED lights around entire circumference of the sign for maximum visibility and safety.
Specifications:
15 watt solar panel @ 12vdc
Aluminum frame construction of solar module
Durable ABS sign housing
System supplied with “on board” programmable software to control:
DURATION ON (FLASH)
DURATION OFF
Battery condition indicator
(RS232/USB interface)
Just plug into computer port, load software and adjust to desired settings.
3 year warranty
12 volt rechargeable battery is enclosed in weatherproof housing
All mounting hardware included.
Available in 24, 30, and 36 inch versions
Our system has been field tested under extreme heat, rain, and cloudy conditions over several months with no interruption in service or degradation of performance.
Meets MUTCD requirements.
ANSI Z535.4 STANDARD 36” STOP SIGN, diamond grade, is used in the assembly of the system.
Replaces 73 incandescent bulbs in IGT uprights and bartops
T5 Wedge base
Lasts 5 years
Bright-but not too bright!
12V
This is an extremely popular product in Las Vegas casinos-email me to request samples.
Also available for slant tops
Related product: LED for Buttons-Slant Tops
Replaces 658 bulbs in slant top buttons
Lasts 5 years
Bright-but not too bright!
T-3-1/4 Wedge base
12V
This is an extremely popular product in Las Vegas casinos-email me to request samples.
Also available for uprights and bartops.
Use this simple and effective HDMI® extender to send High Speed (1080p) HDMI® signals up to 30 meters (98 feet) over Cat5e/6 cable!
Most extenders are small boxes, which must be mounted and which require additional cables to use. While they can usually handle longer distances, if you don’t need to take the signal more than 30 meters, this simple pair of extender adapters is the right solution.
Each adapter plugs into your HDMI ports, with the sender in the source device and the receiver at the display. Then just run a pair of Cat5e/Cat6 cables between the adapters and you’re in business! You won’t need to provide external power – it gets the power it needs from the HDMI source device.
The adapters support up to 1080p resolutions and digital audio, including DTS® Digital, DTS-HD Master Audio™, and Dolby TrueHD™. They support up to 8-bits per channel (24-bit total) Deep Color and HDCP™ pass-through.
2-port 4K HDMITM splitter lets you share two HDMITM displays or projectors with an HDMITM-enabled audio / video source device, such as a computer, Blu-ray player or cable TV set-top box.
SLOTCHARGE® Dual USB Cell Phone and Tablet Charging Kits allow your players to plug their phones and tablets in at the machine, completely separate from the machine wiring. NO GAMING APPROVAL REQUIRED.
Charges any type of phone and tablet, including iPhones and iPads.
-Charges only. All data is blocked by power circuitry.
-Dual USB connector is easily installed into cabinet
-LED charge indicator
-Power supply plugs into a 120v receptacle or power strip
-Completely separate from the machine
-No Gaming approval required
-Compatible with both Android and iPhones
Each kit includes one each:
LED-lit Dual USB Connector with power management circuitry
Waterproof cap
Power supply
6ft USB cable
Kit Price: $22.95
Can be used on any cabinet, desk or panel. For casinos, bars, restaurants, lounges, arcades, conference rooms, lobbies, waiting rooms or anywhere you have a flat surface and 120v power available.
Input: AC100 ~ 240V Output: DC5V 2.1A and 1A dual output. UL listed
USB 3.0 A to B Cables have gold- plated contacts that resist corrosion and provide rigidity
Foil and braid shielding minimizes EMI and RF interference
USB Connector: Black D-housing is dust- and water-resistant. Comes with waterproof cap attached (not shown in picture)
Replaces Saflok 54490
Voltage: 6 Volts
Capacity: 2779mAh
Chemistry: Alkaline
Dimensions: 2.64″L x .60″W x 2.01″H
Weight: 3.6 oz
Termination: Connector (Wire Leads to Connector)
CR 80 Card Size = 3 3/8” x 2 1/8”* Pre-saturated and individually sealed* Reduces residue build-up without dismantling equipment
Quick, easy, inexpensive preventative maintenance
Contains 99.7% isopropanol (IPA)
For card readers – like credit card terminals, POS terminals, gas pump card readers, credit vending machines, security/time/badge readers, player tracking cards, ATMs, hotel door locks and more.
Just a swipe with the credit card cleaner removes dirt, magnetic oxides, lotions and other contaminants from concealed magnetic and optic sensors.
Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.
Check availability here.
F1-5000U
650nm LED Multimode Fiber Continuity Tester with 2.5mm Universal Adapter for SC, ST, FC
This Fiber Optic Continuity Tester is an excellent tool for fiber identification when multiple fibers are present. Simply connect your ST,FC, or SMA connector to the adapter and push the on/off button. The red LED light is transmitted down the fiber and escapes through the other end. The unit operates on two supplied AA batteries. The durable rubber packaging easily stores in a tool box. The continuity tester is a low cost, high quality unit.
This unit utilizes a red color LED to provide multimode only fiber continuity testing. It is excellent for continuity verification or simple fiber identification in an interconnect location. The flashlight shape and durable hard rubber casing make it very easy to work with.
This unit has a 2.5mm universal adapter which can accept all 2.5mm ferrule connectors such as FC, SC, ST and E2000.
Please note:
This unit can not replace the functions of a laser-based fault locator. Laser Fault Locators utilize a much higher powerful 650nm red laser to find breakage and bad bends in single mode and multimode fibers.
Battery: (2) AA Alkaline
Size 1.75” x 7.0”
Connector Styles 2.5um universal: ST SC FC SMA
(If needed, a hybrid patchcord and mating sleeve will enable efficient hook-ups to other connector styles.)
Super bright! Cut to fit the size you need from the 5 meter reel (16.4ft).
Replace CCFL with LEDs at much lower cost. Lasts 50,000 hours or 5 years.
Color: Pure White
Voltage: 12V
LED: 3528
120 LEDs per meter
Self-adhesive tape
