Jonard Tools CSR-1575 Cable Strip & Ring Tool

Jonard Tools CSR-1575 Cable Strip & Ring Tool

The CSR-1575 is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm (0.3″) in diameter. The tool features an easily adjustable slit blade and ring blade as well as a removable and reversible V block that improves slitting performance and accommodates smaller to larger diameter cables.

Simple to use:

  • Ringing a cable: Ring blade is easily adjustable using the adjustment knob. Rotate the knob toward the ” ” sign to increase cutting blade depth and rotate the knob toward the “-” sign to decrease cutting depth. Once depth is determined, open jaw, insert cable, rotate tool around cable 3 times, open jaw and remove cable, pull off jacket.
  • Slitting a cable: First select which V groove is needed on the V block, we recommend using the small V groove for cables 3mm or smaller and use the large V groove for cable larger than 3mm. To remove V block simply push on the V block, remove from tool.
  • Select groove then push V block back into tool. Set the depth of the slitting blade by loosening the screw holding the blade in place, use the tab on the blade to move the blade up or down to the desired slitting depth, tighten screw. Open jaw, insert cable to be slit, close jaw and pull.


Jonard Tools MS-6 Mid Span Slitter

Jonard Tools MS-6 Mid Span Slitter

Designed to provide easy access to optical fibers in loose buffer tubes 1.2mm – 3.3 mm diameter. With 6 precision grooves buffer tube slitting is done without damage to the fiber. The blades are replaceable.

For loose tube jacket.

Groove Sizes:

  • 1.2 – 1.5 mm
  • 1.5 – 1.8 mm
  • 1.8 – 2.1 mm
  • 2.1 – 2.5 mm
  • 2.5 – 2.9 mm
  • 2.9 – 3.3 mm
 

Easy to use:

  1. Select the correct groove. Each groove is marked with the recommended fiber size
  2. Place the fiber in the groove to be used. The arrow on the top of the MS-6 indicates blade location and pulling direction.
  3. Close the tool making sure lock is engaged and pull


Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Jonard Tools TK-350 Fiber Optic Tool Kit with Kevlar Cutter

Kit includes:

JIC-375 Three Hole Fiber Optic Stripper

The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the 125 micron glass fiber without nicks or scratches.

JIC-186 Wire & Kevlar Cutting Shears

High carbon stainless steel blades (heat treated to HRC 58-60) designed to cut Kevlar®, cabling insulation, tape, cable ties and other material. Ergonomic handles for user comfort and durability. Adjustable joint screw under protective cap, serrated blade grip material, sharp and durable 6″ long.

H-60 Molded Two Tool Pouch

Made of durable PVC material with metal clip.

 



Jonard Tools TK-160 Fiber Prep Kit with Connector Cleaners & Visual Fault Locator

Jonard Tools TK-160 Fiber Prep Kit with Connector Cleaners & Visual Fault Locator

Jonard Tools’ TK-160 fiber preparation kit, with Connector Cleaners (FCC-126, FCC-250) & Visual Fault Locator (VFL-150) provides you with all of the tools needed to access and prepare a fiber optic cable for termination.

The TK-160 Fiber Prep Kit includes:

  • CST-1900 Round Cable Stripper
  • CSR-1575 Cable Strip & Ring Tool
  • FOD-2000 Fiber Optic Drop Cable Slitter
  • MS-6 Mid Span Slitter for opening various types of fiber optic cables
  • JIC-375 3-hole fiber stripper
  • JIC-186 Kevlar cutter for prepping the fiber for termination
  • SD-61 multi bit screwdriver
  • FL-2000 LED flashlight
  • JIC-2288 diagonal cutter
  • JIC-842 long nose pliers
  • FW-5 fiber wipes
  • FCC-125 Fiber Connector Cleaner 1.25mm
  • FCC-250 Fiber Connector Cleaner 2.5mm
  • VFL-150 Visual Fault Locator Kit

All of these tools are provided in a rugged tool case with extra pockets for additional tools, connectors and many other items.



Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

Jonard Tools FCC-125 Fiber Connector Cleaner 1.25mm

The Jonard Tools FCC-125 quick click ferrule end face cleaner is designed to provide exceptional  cleaning performance by cleaning LC connectors beyond the critical fiber core area and cleaning deep into the contact area of a bulkhead adapter or connectors on fiber optic cables. The tethered dust cap provides protection for the micro fiber cleaning fabric and is an adapter for connector end face cleaning.

The FCC-125 features a patented 360 degree Rotational Tip for extra wide cleaning, easy one push operation and extendable nozzle, providing an additional 1.5 inches for a nozzle length of 4 inches to aid in accessing deep ports or crowded access panels. Additionally the FCC-125 uses a non-woven micro fiber that is lint free. The FCC-125 provides 800 cleanings and the outer body is made from static dissipative material for safe ESD work.

Jonard Tools patented cleaning technology features:
  • Slide-Guide™ non-slip micro tape feeder guarantees high reliability
  • Dual Rotational tip provides superior ferrule End face cleaning


Jonard Tools DP-200 High Vacuum Desoldering Pump

Jonard Tools DP-200 High Vacuum Desoldering Pump

A specially engineered high vacuum desolder pump made to exacting specifications, ESD safe and providing precise repeatable operation.

This ESD Safe desoldering pump is fitted with a Teflon Tip and is 13″ long including tip. Durable corrosion resistant plastic construction. Precision metal plunger. Corrosion treated springs. Insulated vacuum pulse. Regulated return (1 millisecond ±30%). Uniform reset pressure (11in. lbs. ±20%). Cushioned shock reduction (pulse release to minimize board damage).

FEATURES:

  • ESD Safe
  • Teflon Tip
  • Durable corrosion resistant plastic construction
  • Precision metal plunger
  • Corrosion treated springs
  • Insulated vacuum pulse
  • Regulated return (1 millisecond ±30%)
  • Uniform reset pressure (11in. lbs. ±20%)
  • Cushioned shock reduction (pulse release to minimize board damage)

 



Jonard Tools PT-300 Pocket Continuity Tester and Toner

Jonard Tools PT-300 Pocket Continuity Tester and Toner

The PT-300 pocket-sized toner is a drop cable continuity tester and cable identifier. Easy to use and runs on a standard AAA battery.  Will test up to 5,000 feet.  On-off switch in the base of the unit.  Toner is turned on when the speaker is unscrewed from the base.  Voltage protected to 52VDC.  5″

Designed to help identify cables prior to connecting CATV, Satellite or other transmitting – receiving systems.

  1. Loud tone identifies line carrying signal.
  2. LED light indicates splitters, DC shorts and other self grounding devices in cable.
  3. Convenient on/off switch extends battery life.
  4. Right angle male push-on connector for working in confined areas.
  5. Accurate up to 5,000 feet (1,500 m).
  6. High quality AAA battery for operation (included).
  7. Clear markings on the barrel for use and battery replacement.
  8. Connect the toner without emitting a tone. Now a discretionary option.
  9. Voltage Protected to 52V DC
  10. Just 5″ long, weighs 2 oz. (57 g)

View brochure