Hakko 485 850W Rework System with Shop Air Unit

Hakko 485 850W Rework System with Shop Air Unit

compatible with LEAD-FREE solder

The Hakko 485 Rework System ESD 850W with Shop Air Unit is a compact, high-performance soldering system developed exclusively for soldering and desoldering components and connectors mounted on PC boards.

Hakko 485 850W Rework System with Shop Air Unit features:

  •  Solder flow is time-controlled and temperature-controlled
  • soldering and desoldering cycles are automatic and precise
  • A built in locator light pinpoints the exact position for placing components
  • Solder remaining in through-holes is completely removed by using the Hakko 486 Air Blower (included with 485-V12)
  • A large selection of nozzle sizes available.
  • Power Comsumption: 850w
  • Temperature Range: normally up to 299°C (570°F)
  • Air Pressure: 2 kg/cm² (4.4 lbs.) – 10 kg/cm² (22 lbs.)

NOTE: Due to the increased use of lead free and other solder compositions, the 485 is shipped with an empty solder pot, saving time and effort for the end-user.

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



HAKKO FT-700 Tip Polisher

HAKKO FT-700 Tip Polisher

The Hakko FT-700 is great for Lead-Free solder!

When hand soldering with Lead-Free alloys, higher tip temperatures and highly-active fluxes causes oxidation and corrosion, which greatly decreases the life of your soldering iron tip. The Hakko FT-700 tip polisher helps increase the life of your tip by keeping it clean and free from oxidation easily and quickly.

  • Fast and easy way to keep your soldering iron tips clean and free from oxidation
  • Two spinning polishing brushes (brushes will not damage tip plating)
  • Lead-free chemical paste for immediate tip tinning
  • Removes oxidation caused by higher temperatures and high activity fluxes
  • Extends tip life by removing oxidation

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko 373 Soldering Self Feeder

Hakko 373 Soldering Self Feeder

Hakko 373-11 Solder Eire Self Feeder features:

  • Sealed ball bearing provides durability and efficiency
  • Continuous operation ensure faster and more efficient processing
  • Easy-to-use. Simply set the component tape in place and turn the handle
  • Super-sharp, high-quality cutting blade allows you to cut all taped radial parts cleanly and smoothly.
Specification
Power Consumption 6W
Motor Rating 24V DC, 3.2W
Solder Feed Time 0 – 7 sec. (Auto mode)
Solder Feed Speed 4.5 – 26mm/sec. (0.18 – 1.0 in./sec.)
Solder Return Qty. 1.5 mm (0.06 in.) from taping end
2.0mm (0.08 in.) from part end
Mode Switch Auto / Manual
Solder Diameter 0.6, 0.65, 0.8, 1.0, 1.2, 1.6mm
(0.024, 0.026, 0.031, 0.039, 0.04, 0.063 in.)
Coiled Solder Maximum 1 kg bobbin (2.2 lbs.)

 

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko 557V-V12 200W Matchless Soldering Iron

Hakko 557V-V12 200W Matchless Soldering Iron

The HAKKO 557V-V12 “Matchless” 200W soldering iron is super heavy-duty iron for soldering stained glass and other jobs that need a lot of power. There is a built in power switch on the handle for ease and convenience. It can also be used as a branding iron, or a cattle prod. Plastic handle.

 

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko 551V-V12 150W Matchless Soldering Iron

Hakko 551V-V12 150W Matchless Soldering Iron

The HAKKO 551V-V12 “Matchless” soldering iron is super heavy-duty iron for soldering stained glass and other jobs that need a lot of power. There is a built in power switch on the handle for ease and convenience. It can also be used as a branding iron, or a cattle prod. Plastic handle.

 

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T19-I Thin Conical Soldering Tip for FX-601

Hakko T19-I Thin Conical Soldering Tip

Hakko T19-I Thin Conical Soldering Tip:

  • Thin conical end and is an ultrafine tip
  • Best suited for soldering at narrow pitches, etc
  • Used for soldering micro components. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.
  • Tip length: .67″ (17mm)
  • Tip radius: .008″ (.2mm)

Hakko T19-I for the Hakko FX-601 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T19-D32 Conical Chisel Soldering Tip for FX-601

Hakko T19-D32 Conical Chisel Soldering Tip

Hakko T19-D32 Conical Chisel Soldering Tip:

  • Shape like a Flat-blade screwdriver
  • Capable of soldering by applying the tip in 2 ways: line and face
  • Can be used for any soldering work.
  • Tip length: .73″ (18.5mm)
  • Tip radius: 0.13″ (3.2mm)

Hakko T19-D32 for the Hakko FX-601 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T19-C65 Beveled Conical Soldering Tip for FX-601

Hakko T19-C65 Beveled Conical Soldering Tip

Hakko T19-C65 Conical Soldering Tip:

  • Shaped like a cone or column cut at a slant
  • Allows users to select the cut surface size depending on the workpiece.
  • Used for drag soldering and pre-tinning of lead wires.
  • Tip length: .61″ (15.5mm)
  • Tip diameter: 0.26″ (6.5mm)

Hakko T19-C4 for the Hakko FX-601 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T19-C4 Beveled Conical Soldering Tip for FX-601

Hakko T19-C4 Beveled Conical Soldering Tip

Hakko T19-C4 Conical Soldering Tip:

  • Shaped like a cone or column cut at a slant
  • Allows users to select the cut surface size depending on the workpiece.
  • Used for drag soldering and pre-tinning of lead wires.
  • Tip length: .73″ (18.5mm)
  • Tip radius: 0.16″ (4mm)

Hakko T19-C4 for the Hakko FX-601 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T19-C3 Beveled Conical Soldering Tip for FX-601

Hakko T19-C3 Beveled Conical Soldering Tip

Hakko T19-C3 Conical Soldering Tip:

  • Shaped like a cone or column cut at a slant
  • Allows users to select the cut surface size depending on the workpiece.
  • Used for drag soldering and pre-tinning of lead wires.
  • Tip length: .73″ (18.5mm)
  • Tip radius: 0.12″ (3mm)

Hakko T19-C3 for the Hakko FX-601 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T19-B2 Conical Soldering Tip for FX-601

Hakko T19-B2 Conical Soldering Tip

Hakko T19-B2 Conical Soldering Tip:

  • All-round type
  • Can be used from any direction
  • Easy to hold at any position
  • Possible to solder any surface from small to large
  • Tip radius: .04″ (1mm)
  • Tip length: .73″ (18.5mm)

Hakko T19-B2 for the Hakko FX-601 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T19-B Conical Soldering Tip for FX-601

Hakko T19-B Conical Soldering Tip

Hakko T19-B Conical Soldering Tip:

  • All-round type
  • Can be used from any direction
  • Easy to hold at any position
  • Possible to solder any surface from small to large
  • Tip length: .73″ (18.5mm)
  • Tip radius: 0.02″ (.5mm)

Hakko T19-B for the Hakko FX-601 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko FX-601 Adjustable Temperature Soldering Iron

Hakko FX-601 Adjustable Temperature Soldering Iron

The Hakko FX-601 Soldering Iron is the next generation of variable temperature-controlled soldering irons. It is ideal for soldering applications that require mobility or a long reach, such as soldering solar panels, etc. The extremely lightweight, ergonomic handpiece allows you to solder for long periods of time without hand fatigue.

The soldering iron also features a convenient temperature adjustment dial in the handpiece that allows the user to select their optimal soldering temperature, and the advanced electronic controls and efficient ceramic heater provide accuracy and stability that rival older Hakko stick irons.

The Hakko FX-601 also features a longer power cord for better reach with the iron and includes a temperature adjustment tool that can be used to ‘adjust and lock’ the selected temperature of the iron if necessary by removing the adjustment dial.

  • Power Consumption; 67W 120VAC
  • Tip-to-Ground: < 2 Ω
  • Leak Voltage: < 2 mV
  • Temp Range: 240-540°C (464-1004°F)
  • Temp Accuracy: ±10°C (±18°F)
  • Temp Stability: ±1.0°C (±1.8°F)
  • Heater Type: Ceramic
  • Length: (w/o cord) 235 mm (9.25 in.) w/T19-D5
  • Tip Weight: (w/o cord) 68 g (0.1 lb)
  • Reach: 1.8 m (6.0 ft)
  • Tips: T19 Series
  • Standard Tip: T19-D5
  • Shipping Size 273 x 114 x 38 mm (10.75 x 4.5 x 1.5 in)
  • Shipping Weight 254 g (0.56 lb)

Solder tips for FX-601

 

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T22-K Heavy Duty Knife Tip

Hakko T22-K Heavy Duty Knife Tip

Hakko T22-K Heavy Duty Knife Tip:

  • Size: R5mm/45 Deg. x 15mm
  • Double the mass of T15 series solder tips
  • Built-in patented heating element
  • Fast thermal recovery
  • Superior tip plating provides for a long tip life

Hakko T22-K for the FM-2030/FM-2031 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T22-JD08 Heavy Duty Bevel Chisel Tip

Hakko T22-JD08 Heavy Duty Bevel Chisel Tip

Hakko T22-JD08 Heavy Duty Bevel Chisel Tip:

  • 0.8mm/30° x 6.3mm x 4.5mm
  • Bends the tip end
  • Capable of soldering by applying the tip in 2 ways: face and point
  • Used for drag soldering and bridging correction

Hakko T22-JD08 for the FM-2030/FM-2031 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T22-D52 Heavy Duty Chisel Tip

Hakko T22-D52 Heavy Duty Chisel Tip

Hakko T22-D52 Heavy Duty Chisel Tip:

  • 5.2 x 8mm
  • Shape like a Flat-blade screwdriver
  • Capable of soldering by applying the tip in 2 ways: line and face
  • Can be used for any soldering work.

Hakko T22-D52 for the FM-2030/FM-2031 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T22-D45 Heavy Duty Chisel Tip

Hakko T22-D45 Heavy Duty Chisel Tip

Hakko T22-D45 Heavy Duty Chisel Tip:

  • 4.5 x 15mm
  • Shape like a Flat-blade screwdriver
  • Capable of soldering by applying the tip in 2 ways: line and face
  • Can be used for any soldering work.

Hakko T22-D45 for the FM-2030/FM-2031 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.



Hakko T22-D32 Heavy Duty Chisel Tip

Hakko T22-D32 Heavy Duty Chisel Tip

Hakko T22-D32 Heavy Duty Chisel Tip:

  • 3.2 x 8mm
  • Shape like a Flat-blade screwdriver
  • Capable of soldering by applying the tip in 2 ways: line and face
  • Can be used for any soldering work.

Hakko T22-D32 for the FM-2030/FM-2031 N2 Soldering Iron

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

hakkowhichtip

Kiesub Electronics is a leading distributor of Hakko soldering equipment.  Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.