Hakko FR830 Pre-Heater

Hakko FR-830 Pre-Heater

FREE UPS GROUND SHIPPING

The Hakko FR-830 is a compact and low cost solution to preheating printed circuit boards. The design of the FR-830 delivers consistent heat to the bottom of printed circuit boards and is particularly beneficial when soldering lead-free assemblies.

The integrated self-resetting overheat protection, high pressure fan, and convex outlet reduces heat buildup and prevents blockage of the outlet, and the angled heater tube protects the heating element from damage caused by debris that may accidentally drop inside the heater opening.

Closed loop temperature control allows the output air temperature to be set anywhere between 150° – 300°C (302° – 572°) and an optional Extension Pipe (B3263) extends the airflow an additional 27mm (1.1 inch).

The FR-830 also has a port that allows it to be activated by an optional hand switch (B2763) or foot switch (B1649).

Compact design; Measures only 5.5(w) x 3.0(h) x 7.3(d) in. [140(w) x 75(h) x 185(d) mm]
• Fast heating
• Excellent thermal stability
• ESD-safe by design

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

Hakko FM-203-01 Dual Port Variable Temp Soldering Station

FREE UPS GROUND SHIPPING

The FM-203-01 offers two soldering ports for a variety of soldering tools that can be used in a variety of combinations, including soldering irons, SMD hot tweezers and/or desoldering tools.

Note: Desoldering tool requires the Hakko FM-2024 desoldering module.

The FM-203-01 features:

• process control so you can select any temperature you want without changing the tip – one tip, any temperature!

• temperature range 200 – 450°C (400 – 840°F)

• temperature accuracy ±15°C

• LED in handpiece tells the operator the iron is hot

• auto shutoff

• sleep mode functionality

• No Calibration Necessary

Note: Tips are NOT included.

Hakko FX-791 Nitrogen Controller

FREE UPS GROUND SHIPPING

The compact FX-791 Nitrogen Controller is a flowmeter for N₂ soldering iron with flow control valve and regulator.

Controls the flow of nitrogen to the FM-2026 nitrogen iron with the FM-202 and FP-102 soldering stations
Controls the flow level from 0.25 l/min to 2.5 l/min. (recommended level 0.5 – 1.5 l/min.) and should be adjusted to the tip shape
ESD Safe

Hakko FX-780 Nitrogen Generator

Hakko FX-780 Nitrogen Generator

FREE UPS GROUND SHIPPING

The Hakko FX-780 Nitrogen Generator generates Nitrogen gas at max. concentration of 99.9 and provides N₂ gas by compressed air which does not need an electric power supply. Large-capacity type accepts 2 soldering irons.

Concentration of generated air = 99.9%
Concentration of generated N2 gas = 98%
Generator can be placed perpendicularly or horizontally
Part Number: FX780-01 (sold separately, NOT included with FM2026-KIT)

Nitrogen Generation

Hakko FT-700 Tip Polisher

FREE UPS GROUND SHIPPING

The Hakko FT-700 Tip Polisher is the ideal maintenance kit to renew oxidized soldering iron tips, especially when soldering with Lead-Free alloys.

FAST and EASY way to keep your soldering iron tips clean and free from oxidation
Two spinning polishing brushes (brushes will not damage tip plating)
Lead-free chemical paste for immediate tip tinning
ESD safe by desigm

Total Power Consumption: 120V – 430W
Pump Type: Diaphragm pump
Pump Capacity: 5 to 20 l/min. (max)
Control Temperature: 100 to 420

Hakko FM2026-KIT N2 Soldering System

FREE UPS GROUND SHIPPING

bnr_n2_250x51

NOTE:

Used together with HAKKO FM-202, FM-203, FM-204, FM-205, FX-950, FX-951 and FX-952

FM-2026-KIT includes FM2026-01 (Iron) and FX791-01 (Controller) ONLY – It does not include the FM202 Solder Station or the FX780!

The Hakko N2 soldering system is the ideal solution for all your LEAD-FREE hand-soldering applications. The bench-top FX-780 Nitrogen Generator creates nitrogen gas from filtered, dry compressed air and the FX-791 Nitrogen Controller and FM-2026 Soldering Iron delivers it efficiently and uniformly to the soldering area.

NOTE: If you do NOT have nitrogen availability at your work station, the compact FX-780 Generator is the best bang for your buck.

Compact FX-791 Nitrogen Controller
Controls the flow of nitrogen to the FM-2026 nitrogen iron with the FM-202 and FP-102 soldering stations
Controls the flow level from 0.25 l/min to 2.5 l/min. (recommended level 0.5 – 1.5 l/min.) and should be adjusted to the tip shape
ESD-safe

FM-2026 N2 Soldering Iron (for the FM-202 and FP-102 solder stations)
Supplies hot nitrogen (N2) gas to the soldering area
The nitrogen gas is preheated as it passes along the ceramic heater in the FM-2026 handpiece
Soldering efficiency can be improved as the hot nitrogen creates a preheating effect while reducing the amount of oxygen in the solder connection area (less oxidation)

Hakko CHP-170 Clean Cut Micro Cutter

Hakko CHP-170 Clean Cut Micro Cutter

The Hakko CHP-170 Clean Cut Micro Cutter is an excellent general use wire cutting tool suitable for a wide range of applications, including cutting LED strips. Note: Max cut is determined with copper wire.

Clean cut micro cutter
Steel: 2.5 mm
Cut: Flush
Max cut: 16 AWG
Handle: NA
Rockwell Hardness (RHC): 56
View spec

68-170

Hakko T15-IL Conical Solder Tip

Shape: Conical

This Hakko T15-IL Conical Solder Tip is used with the following Hakko Soldering Stations and Systems: FM-204, FM-203, FX-951, FM-202, FP-102, FP-101

TIP,CONICAL,R0.1 x 12.7mm,FM-2021,FM-2027

This type has a thin conical end and is an ultrafine tip which is best suited for soldering at narrow pitches, etc.

It is the best for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.

How to use the Shape I and examples

Hakko FX-901 Cordless Soldering Iron

The HAKKO FX-901 is a lightweight, portable battery-operated soldering iron.

Powered by four AA alkaline or nickel-metal hydride (Ni-MH) batteries (not included), the FX-901 will operate above 600°F for up to 120 continuous minutes. No other battery-operated soldering iron can deliver so much power for so many continuous minutes.

Other cordless soldering tools on the market spark, which can damage sensitive electronic components, and butane can ignite flammable vapors, causing serious injury. But the FX-901 is safe. No spark and no flame.

The FX-901 is the perfect tool for electricians, field service technicians, maintenance personnel, hobbyists, artists and home owners. Use it to solder electrical wiring, repair appliances, alarm systems, RC cars and jewelry, nearly anything that needs soldering where electricity is out of easy reach or unavailable.

FX-901 Features:

ON / OFF switch
• Quick-change composite tip (PN: T11-B style)
• Maintains soldering temperature of 600° F
• Separate battery magazine for easy replacement of batteries
• Long-life battery power (see temperature chart):
• Alkaline batteries ~70 minuteS
• Ni-MH batteries ~120 minutes
• Protective safety cap turns unit off and covers tip

Hakko T15-I Conical Solder Tip

Hakko T15-I Conical Solder Tip

Shape: Conical
TIP,CONICAL,R0.2 x 9.5mm,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Conical

This type has a thin conical end and is an ultrafine tip which is best suited for soldering at narrow pitches, etc.

It is the best for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.

How to use the Shape I and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-D52 Chisel Solder Tip

Shape: Chisel
TIP,CHISEL,5.2 x 8mm,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-D32 Chisel Solder Tip

Hakko T15-D32 Chisel Solder Tip

T15 Series Composite Tip

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Chisel

TIP,CHISEL,3.2 x 5mm,FM-2021,FM-2027

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-D24 Chisel Solder Tip

Shape: Chisel
TIP,CHISEL,2.4 x 10mm,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-D2 Chisel Solder Tip

Hakko T15-D2 Chisel Solder Tip

T15 Series Composite Tip

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Chisel

TIP,CHISEL,2.0 x 5mm,FM-2021,FM-2027

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-D08 Chisel Solder Tip

TIP,CHISEL,0.8 x 9.5mm,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face.

The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

How to use the Shape D and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-C1 Bevel Solder Tip

TIP,BEVEL,1mm/60° x 12mm,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Bevel

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.

It is used for drag soldering and pre-tinning of lead wires.

How to use the Shape BC/C and examples　Difference between BC/C and BCF/CF tip shape

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-BC2 Bevel Solder Tip

Hakko T15-BC2 Solder Tip

NOTE: This tip replaces part number T7-BC2

T15 Series Composite Tip

This Hakko T15-BC2 Bevel Solder Tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Bevel

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.

It is used for drag soldering and pre-tinning of lead wires.

How to use the Shape BC/C and examples　Difference between BC/C and BCF/CF tip shape

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-BC12 Bevel Solder Tip

T15 Series Composite Tip

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Bevel

TIP,BEVEL,1.2mm/60° x 15mm,FM-2021,FM-2027

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.

It is used for drag soldering and pre-tinning of lead wires.

How to use the Shape BC/C and examples　Difference between BC/C and BCF/CF tip shape

HAKKO proposes guidelines on how to select the most suitable tip size.