Hakko T15-R23 Slot Tip

Hakko T15-R23 Slot Tip:

TIP,SLOT,2.3 x 1.5mm,CHIP0805,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Slot

This type has a groove at the tip end.

It is suitable for removing ICs.

How to use the Shape R and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

Hakko T15-1001 Tunnel Tip

Hakko T15-1001 Tunnel Tip

TIP,TUNNEL,4.6 x 5.1mm,SOIC-8,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Tunnel

This type is capable of heating plural pins or lead wires at once and is used for rework of SMDs.

It is used for removal of SOP.

How to use the SMD Type : Shape Tunnel and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko T15-1002 Tunnel Tip

Hakko T15-1002 Tunnel Tip:

TIP,TUNNEL,10.4 x 5.1mm, SOIC-14/16,FM-2021,FM-2027

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FM-206 3-Port Soldering Station (FM2027 Handpiece)
Hakko FM-204 Soldering Station
Hakko FM-203 Soldering Station
Hakko FX-951 Soldering Station
Hakko FM-202 Soldering System
Hakko FP-102 Soldering Station
Hakko FP-101 Soldering Station

Tip Shape: Tunnel

This type is capable of heating plural pins or lead wires at once and is used for rework of SMDs.

It is used for removal of SOP.

How to use the SMD Type : Shape Tunnel and examples

HAKKO proposes guidelines on how to select the most suitable tip size.

Hakko FM206-DTS 3-Port Rework Station

FREE GROUND SHIPPING!
FM-206 Desoldering Rework Station with FM-2022 Tweezer, FM-2024 Desoldering and FM-2027 Soldering Irons

Hakko FM206-DTS Features:

The Hakko FM-206 3-Port Rework Station can power any Hakko FM Series handpiece, thus offering the ability for you to tailor the station to fit your specific rework needs. The station’s sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station.
• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design

• NOTE: Tips and Nozzles are NOT included with station or any configuration. Must order separately.

The Hakko FM206-DTS configuration contains:

(1) FM-2024 desoldering tool (FM2024-42 Kit) Order N3 nozzles here
(1) FM-2022 Parallel Remover (FM2022-05 Kit)
(1) FM-2027 soldering iron (FM2027-06 Kit) Order T15 tips here
• FM206-55 station is included.

Hakko FM-206-DSS 3-Port Rework Station

FREE UPS GROUND SHIPPING

The Hakko FM206-DSS configuration contains:

(1) FM-2024 desoldering tool (FM2024-42 Kit)
(2) FM-2027 soldering irons (FM2027-06 Kit)
• FM206-55 station is included.

• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds ANSI J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830 and FR-870 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design

NOTE: Tips and Nozzles are NOT included with station or any configuration

Click here for N3 nozzles for the included FM2024 Desoldering Tool

Click here for T15 tips for the included FM2027 Soldering Irons

Hakko N3-L10 Desoldering Nozzle Extra Long 1.0mm

NOZZLE,EXTRA LONG,1.0mm,FM-2024, FM204-CP

The Hakko N3-L10 is a desoldering nozzle for use with the FM2024-01 Desoldering Handpiece.

NOZZLE/TIP HEATER CARTRIDGE
Building on Hakko’s revolutionary composite tip technology, the desoldering nozzle/tip heater cartridge assembly offers a one-step, quick-change design with fast thermal recovery; the enlarged throat and shortened nozzle design is virtually non-cloggable, making it ideal for NO LEAD applications; and its slender body enables it to reach those difficult-to-reach component pads on densely populated boards.

Hakko N3-23 Desoldering Nozzle 2.3mm

NOZZLE,2.3mm,FM-2024, FM204-CP

The Hakko N3-23 is a desoldering nozzle for use with the FM2024-01 Desoldering Handpiece.

Hakko N3-20 Desoldering Nozzle 2.0mm

NOZZLE,2.0mm,FM-2024, FM204-CP

The Hakko N3-20 is a desoldering nozzle for use with the FM2024-01 Desoldering Handpiece.

Hakko N3-16 Desoldering Nozzle 1.6mm

NOZZLE,1.6mm,FM-2024, FM204-CP

The Hakko N3-16 is a desoldering nozzle for use with the FM2024-01 Desoldering Handpiece.

Hakko N3-13 Desoldering Nozzle 1.3mm

NOZZLE,1.3mm,FM-2024, FM204-CP

The Hakko N3-13 is a desoldering nozzle for use with the FM2024-01 Desoldering Handpiece.

NOZZLE/TIP HEATER CARTRIDGE
Building on Hakko’s revolutionary composite tip technology, the desoldering nozzle/tip heater cartridge assembly offers a one-step, quick-change design with fast thermal recovery; the enlarged throat and shortened nozzle design is virtually non-cloggable, making it ideal for NO LEAD applications; and its slender body enables it to reach those difficult-to-reach component pads on densely populated boards.

Hakko N3-10 Desoldering Nozzle 1.0mm

NOZZLE,1.0mm,FM-2024, FM204-CP

The Hakko N3-10 is a desoldering nozzle for use with the FM2024-01 Desoldering Handpiece.

NOZZLE/TIP HEATER CARTRIDGE
Building on Hakko’s revolutionary composite tip technology, the desoldering nozzle/tip heater cartridge assembly offers a one-step, quick-change design with fast thermal recovery; the enlarged throat and shortened nozzle design is virtually non-cloggable, making it ideal for NO LEAD applications; and its slender body enables it to reach those difficult-to-reach component pads on densely populated boards.

Hakko N3-08 Desoldering Nozzle 0.8mm

NOZZLE,0.8mm,FM-2024, FM204-CP

The Hakko N3-08 is a desoldering nozzle for use with the FM2024-01 Desoldering Handpiece.

NOZZLE/TIP HEATER CARTRIDGE
Building on Hakko’s revolutionary composite tip technology, the desoldering nozzle/tip heater cartridge assembly offers a one-step, quick-change design with fast thermal recovery; the enlarged throat and shortened nozzle design is virtually non-cloggable, making it ideal for NO LEAD applications; and its slender body enables it to reach those difficult-to-reach component pads on densely populated boards.

Hakko N3-06 Desoldering Nozzle 0.6mm

NOZZLE,0.6mm,FM-2024, FM204-CP

The Hakko N3-06 is a desoldering nozzle for use with the FM2024-01 Desoldering Handpiece.

Hakko FM-204 Desoldering & Soldering Station

Hakko FM-204 Desoldering & Soldering Station

FREE UPS GROUND SHIPPING

The Hakko FM-204 Desoldering & Soldering Station is a “Self-Contained” Desoldering Station/Rework Tool with all the Soldering Functionality of the FM-203 in a Single-Port Station.

The FM-204 ships with one (1) FM2024-02 desoldering tool.
Built in vacuum pump
Temperature range 200 – 450°C (400 – 840°F)
Temperature accuracy ±15°C
Quick-change composite nozzles (N3 series)
Gun or Pencil-style desoldering handpiece
Sleep mode functionality
Excellent thermal recovery
The integrated nozzle containing both heating element and sensor provides higher thermal recovery than conventional tips.

fm204

Nozzles are NOT included

Order N3 nozzles here

Note: The FM-204 and FM204-CP (Conversion Port) are “SINGLE PORT” stations, meaning, ONLY ONE HANDPIECE can be used at a time. (You cannot use the soldering handpiece and desoldering handpiece at the same time.)

Hakko T18-SB Solder Tip

NOTE: This tip replaces part number 900M-T-SB

T18-SB Tip

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FX-888 Soldering Station
Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System)
Hakko 907 Soldering Iron
Hakko 907-ESD Soldering Iron
Hakko 900M Soldering Iron
Hakko 900M-ESD Soldering Iron
Hakko 928 Soldering Station
Hakko 936 Soldering Station
Hakko 936-ESD Soldering Station
Hakko 937 Soldering Station
Hakko 703 Soldering Station

Tip Shape: Conical

Hakko T18-S9 Solder Tip

NOTE: This tip replaces part number 900M-T-S9

T18-S9 Tip

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FX-888 Soldering Station
Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System)
Hakko 907 Soldering Iron
Hakko 907-ESD Soldering Iron
Hakko 900M Soldering Iron
Hakko 900M-ESD Soldering Iron
Hakko 928 Soldering Station
Hakko 936 Soldering Station
Hakko 936-ESD Soldering Station
Hakko 937 Soldering Station
Hakko 703 Soldering Station

Tip Shape:Chisel

Hakko T18-S6 Solder Tip

NOTE: This tip replaces part number 900M-T-S6

T18-S6 Tip

This tip is used with the following Hakko Soldering Stations and Systems:

Hakko FX-888 Soldering Station
Hakko 913 ESD Safe Fume Extraction Iron (Requires a Fume Extraction System)
Hakko 907 Soldering Iron
Hakko 907-ESD Soldering Iron
Hakko 900M Soldering Iron
Hakko 900M-ESD Soldering Iron
Hakko 928 Soldering Station
Hakko 936 Soldering Station
Hakko 936-ESD Soldering Station
Hakko 937 Soldering Station
Hakko 703 Soldering Station

Tip Shape: Bevel

Hakko FS-100 Solder Tip Tinner Cleaner

Hakko Lead Free Solder Tip Tinner & Cleaner .35 oz

The Hakko FS-100 Solder Tip Tinner Cleaner is a chemical paste best suited for the removal of oxidation on soldering iron tips.

For retinning soldering tips
For oxidation removal on soldering tips
As Diamnonium phosphate is not included, P.W.B. is not corroded due to flux residue. (Conforming to the JIS-Z-3197 6.6.1 test method)
Use FS-100 in combination with HAKKO FT-700 for enhanced effectiveness.

Use example of FS-100

Hakko T15-R23 Slot Tip