Hakko T15-J02 Bent Tip

Hakko T15-J02 Bent Tip

Hakko T15-J02 Bent R0.2mm/30 Deg. x 3.5mm x 12mm for Hakko FM-206 (With FM2027), Hakko FM-204, Hakko FM-203, Hakko FX-951, Hakko FM-202, Hakko FP-102, Hakko FP-101

Size: R0.2mm/30 Deg. x 3.5mm x 12mm Bent

Built-in patented heating element

Superior tip plating provides for a long tip life

Fast thermal recovery

Higher temperature tolerances than T7 series

Kiesub offers a wide range of soldering tip variations.

HAKKO proposes guidelines on how to select the most suitable tip size.

Kiesub Electronics is a leading distributor of Hakko soldering equipment. Located in Las Vegas, we stock a wide variety of Hakko soldering stations, desoldering and rework stations, solder tips, desolder nozzles, analog and digital soldering stations, soldering irons and guns, solder and solder paste, and many other soldering accessories.

Hakko FM-203-01 Dual Port Variable Temp Soldering Station

FREE UPS GROUND SHIPPING

The FM-203-01 offers two soldering ports for a variety of soldering tools that can be used in a variety of combinations, including soldering irons, SMD hot tweezers and/or desoldering tools.

Note: Desoldering tool requires the Hakko FM-2024 desoldering module.

The FM-203-01 features:

• process control so you can select any temperature you want without changing the tip – one tip, any temperature!

• temperature range 200 – 450°C (400 – 840°F)

• temperature accuracy ±15°C

• LED in handpiece tells the operator the iron is hot

• auto shutoff

• sleep mode functionality

• No Calibration Necessary

Note: Tips are NOT included.

Hakko FR-410 140W High Power Desoldering Station

Hakko FR-410 140W High Power Desoldering Station

Free Shipping on orders over $100!

Replaces Hakko 472D

The HAKKO FR‐410 Desoldering Station is designed to fit that need and bridge the gap in power between the 70W HAKKO FM‐204 Desoldering Station, and the 300W HAKKO FR‐400 Ultra Heavy Duty Desoldering Station.

The HAKKO FR‐410 provides 140W of power and has the widest selection of nozzle configurations that can meet almost every need. The station also includes the same popular features from the HAKKO FR‐400 which include an anti‐clogging feature which helps ensure instantaneous application of peak vacuum pressure to the solder joint, a delay timer to prevent premature release of the vacuum system before solder has cleared the heater and is captured in the solder collection chamber, a large, easy to read display that includes a vacuum level indicator to let you know if there are restrictions building that will need to be cleaned out, 3 user programmable presets, and process control password lockout to prevent any unauthorized changes to the systems operation or setup.

Hakko FX-901 Cordless Soldering Iron

The HAKKO FX-901 is a lightweight, portable battery-operated soldering iron.

Powered by four AA alkaline or nickel-metal hydride (Ni-MH) batteries (not included), the FX-901 will operate above 600°F for up to 120 continuous minutes. No other battery-operated soldering iron can deliver so much power for so many continuous minutes.

Other cordless soldering tools on the market spark, which can damage sensitive electronic components, and butane can ignite flammable vapors, causing serious injury. But the FX-901 is safe. No spark and no flame.

The FX-901 is the perfect tool for electricians, field service technicians, maintenance personnel, hobbyists, artists and home owners. Use it to solder electrical wiring, repair appliances, alarm systems, RC cars and jewelry, nearly anything that needs soldering where electricity is out of easy reach or unavailable.

FX-901 Features:

ON / OFF switch
• Quick-change composite tip (PN: T11-B style)
• Maintains soldering temperature of 600° F
• Separate battery magazine for easy replacement of batteries
• Long-life battery power (see temperature chart):
• Alkaline batteries ~70 minuteS
• Ni-MH batteries ~120 minutes
• Protective safety cap turns unit off and covers tip

Hakko FG100B-03 Tip Thermometer

HAKKO FG100B-03 Thermometer

The HAKKO FG-100 thermometer provide fast, accurate tip temperature measurements using a fine CA wire sensor (ø0.2). The FG-100 measures tip temperatures as well as solder pot temperatures (with optional temperature probe)

Lightweight, easy-to-replace sensors provide accurate measurement of tips for verification or calibration processes. When the MAX HOLD feature is enabled, the thermometer will display the maximum temperature measured.

Features:

The sensor (P/N: 191-212) has a special metal alloy coating that resists corrosion and oxidation. Note: the 191-212 sensor can measure temperatures up to 500°C (932°F). For higher temperatures, please use the applicable temperature probe (see Accessories: P/N A1310.)
Sensor replacement is quick and easy
Easy-to-read digital temperature display

Hakko FR-872 1440W IR Preheater

Hakko FR-872 1440W IR Preheater

HAKKO FR-872 4-Bank IR Preheater provides a fast and efficient method of preheating large and small PCB assemblies while still on the workbench but in a very controlled fashion. This preheater uses a new high efficiency carbon filament IR heating lamp that nearly eliminates the visible spectrum while maintaining a very high output in the infrared spectrum with minimal shadowing, allowing for a very even preheating of the PCB.

The HAKKO FR-872 has the same operation as the smaller HAKKO FR-870 but has 4 switchable zones of preheating compared to just 2.and both manual and automatic modes of operation using either a thermocouple for closed-loop feedback of the PCB heating, or using power settings of the heaters.

A new feature that has been added for the HAKKO FR-872 is the Ramp Control. This new feature allows you to control the ramp rate of the PCB when using either of the thermocouple modes of temperature control. The feature allows you to select ramp rates of 1, 2, or 3 degrees Celsius per second. Settings of the preheater can be locked out using a password to prevent inadvertent changes that could affect the process.

As with the HAKKO FR-870, the new HAKKO FR-872 allows for automatic operation following a 3-heating zone profile that can be programmed into the system. A total of 10 profiles can be stored for each mode of operation, for a total of 20 possible profiles. The HAKKO FR-872 also integrates for start/stop operation to work in conjunction with the hot air rework profiles programmable into the HAKKO FM-206 or HAKKO FR-803B (integration requires an optional connection cable that is not included).