Fluke 87V Industrial Multimeter

Product overview: Fluke 87V Industrial Multimeter

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment – even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently.

  • Easy-access door for fast battery changes without breaking the calibration seal
  • Analog bar graph for fast changing or unstable signals
  • Large digit display with bright, two-level backlight for easier reading in low light
  • Touch Hold keeps readings on display even after removing probes

The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.

Built to highest safety standards

All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.

Removable holster with built in test lead and probe storage for convenience

The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.

Additional measurement features

The Fluke 87V is designed and built in the U.S. and comes with a lifetime warranty.

For a complete comparison of specifications, please visit our selection guide for digital multimeters.

 

Specifications
Voltage DC Maximum voltage 1000 V
Accuracy ±(0.05% + 1)
Maximum resolution 10 µV
Voltage AC Maximum voltage 1000 V
Accuracy ±(0.7% + 2) True RMS
AC bandwidth 20 kHz with low pass filter; 3 dB @ 1 kHz
Maximum resolution 0.1 mV
Current DC Maximum amps 10 A (20 A for 30 seconds maximum)
Amps accuracy ±(0.2% + 2)
Maximum resolution 0.01 µA
Current AC Maximum amps 10 A (20 A for 30 seconds maximum)
Amps accuracy ±(1.0% + 2) True RMS
Maximum resolution 0.1 µA
Resistance Maximum resistance 50 MΩ
Accuracy ±(0.2% + 1)
Maximum resolution 0.1 Ω
Capacitance Maximum capacitance 9,999 µF
accuracy ±(1% + 2)
Maximum resolution 0.01 nF
Frequency Maximum frequency 200 kHz
Accuracy ±(0.005% + 1)
Maximum resolution 0.01 Hz
Duty cycle Maximum duty cycle 99.9%
Accuracy ±(0.2% per kHz + 0.1%)
Maximum resolution 0.1%
Temperature measurement -200.0 °C to 1090 °C
-328.0 °F to 1994.0 °F
excluding probe
80 BK temperature probe -40.0 °C to 260 °C
-40.0 °F to 500 °F, 2.2 °C or 2% whichever is greater
Conductance Maximum conductance 60.00 nS
Accuracy ±(1.0% + 10)
Maximum resolution 0.01 nS
Diode Range 3 V
Resolution 1 mV
Accuracy ±(2% + 1)
Duty cycle range Accuracy Within ±(0.2% per kHz + 0.1%)
Environmental Specifications
Operating temperature –20 °C to + 55 °C
Storage temperature –40 °C to + 60 °C
Humidity (without condensation) 0% – 90% (0 °C – 35 °C)
0% – 70% (35 °C – 55 °C)
Operating Altitude 2000 m
Safety Specifications
Overvoltage category EN 61010–1 to 1000 V CAT III, 600V CAT IV
Agency approvals CE, CSA, RCM
Mechanical and General Specifications
Size 201 x 98 x 52 mm (with holster)
Weight 355 g
624 g – with holster
Display Digital 6000 counts updates 4/sec.
19,999 counts in high–resolution mode
Analog 32 segments, updates 40/sec
Frequency 19,999 counts, updates 3/sec at > 10 Hz
Warranty Lifetime
Battery Life Alkaline ~400 hours typical, without backlight
Shock 1 Meter drop per IEC 61010–1:2001
Vibration Per MIL–PRF–28800 for a Class 2 instrument


Fluke AC220 Alligator Clips

Fluke AC220 Alligator Clips

Fluke AC220 Alligator Clips

Fluke AC220 Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

  • One pair (red, black) of small, insulated, nickel plated jaws
  • Blunt tip grabs round screw heads up to 9.5 mm
  • Recommended for use with TL222 and TL224 test leads
  • CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
  • One year warranty
Fluke AC220 Declaration of Conformity


Fluke AC280 Hook Clips

Fluke AC280 Hook Clips

Fluke AC280 Hook Clips

Fluke AC280 Hook Clips SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

  • One pair (red, black) of nickel plated clips
  • Profile narrows to 5.6mm at tip, hook opening 6.4mm at front, 2mm at base
  • Recommended for use with TL222 and TL224 test leads
  • CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed
  • One year warranty

Fluke AC280 Declaration of Conformity



Fluke AC283A SureGrip Pincer Clips

Fluke AC283 SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips

Fluke AC283A SureGrip Pincer Clips designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

  • One pair (red, black) of nickel plated pincers open to 5 mm
  • 11.4 cm flexible insulated shaft
  • Recommended for use with TL222 and TL224 test leads
  • CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed
  • One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity

 

 

 

 



Fluke AC285 SureGrip Alligator Clips

Fluke AC285 SureGrip Alligator Clips

Fluke AC285 SureGrip Alligator Clips

Fluke AC285 SureGrip Alligator Clips are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

  • One pair (red, black) of large alligator clips with nickel-plated steel jaws
  • Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt
  • Recommended for use with TL222 and TL224 test leads
  • CAT IV 600 V; CAT III 1000 V, 10 A rating. UL listed
  • One year warranty

Fluke AC220, AC280, AC283 CE Declaration of Conformity

 



Fluke C125 Meter Case

Fluke C125 Meter Case

  • Zippered carrying case with detachable external pouch.
  • Additional pouch is designed to carry test leads and probes.
  • Convenient belt loop accommodates tool belt.
  • 1 year warranty

 

 



Fluke C25 Large Soft Case

Fluke C25 Large Soft Case

Fluke C25 Large Soft Case

Give your Fluke tools the protection they deserve with the Fluke C25 Large Soft Case for DMMs. Protect your meter and conveniently carry it from one job to the next with this handy carrying case!

The C25 carrying case is a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke’s popular digital multimeters. Our most popular case sold to date!

  • Zippered carrying case with padding and inside pocket.
  • One year warranty

 

 



Fluke C50 Soft Meter Case

Fluke C50 Soft Meter Case

Fluke C50 Soft Meter Case

Give your Fluke tools the protection they deserve with the Fluke C50 Soft Meter Case!

  • Zippered carrying case with inside pocket belt loop and inside meter strap.
  • One year warranty

   

 



Fluke 3000 FC Series Wireless Multimeter

Fluke 3000 FC Series Wireless Multimeter

Built_with_fc_2line_2c (1)

FREE UPS GROUND SHIPPING

See it. Save it. Share it.

All the facts, right in the field. The Fluke 3000 FC True-RMS Wireless Multimeter with the Fluke Connect™ app and ShareLive™ video call.

With its precision, reliability and ease of use, the Fluke 3000 FC Wireless Multimeter is the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 3000 FC gives you true-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 3000 FC provides higher 0.09% basic accuracy, a digital display showing up to three secondary measurements from remote modules, and a bright white backlight.

The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect™ app has all the essentials for convenient test and measurement troubleshooting.

  • AC and DC voltage measurements to 1000V
  • AC and DC current with 0.01 mA resolution
  • Continuity, resistance, diode test, capacitance and frequency measurements
  • MIN/MAX Recording
  • CAT III 1000 V, Cat IV 600 V; IP54

Plus, the Fluke Connect wireless enabled modules measure AC, DC and AC DC voltage, AC and DC current, plus temperature, all of which display on the Fluke 3000 FC Series Wireless Multimeter. Choose a standard clamp or flexible clamp to measure AC current. Mix and match modules to suit your unique measurement needs. Read the primary measurement on the main display and up to three modules at any one time. Modules are available separately or as part of Fluke Connect kits.
View spec



Fluke-107 Palm-sized Digital Multimeter

Fluke-107

Fluke 107 Mini Digital Multimeter

Free shipping!

  • Product overview: Fluke 107 Palm-sized, CAT III Digital Multimeter

    The Fluke 107 is a compact, easy-to-use digital multimeter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a shirt pocket or work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 107 delivers reliable measurements time after time.

    Fluke 107 Complete test functions

    • AC and DC voltage measurement
    • AC and DC current measurement
    • Resistance measurement
    • Capacitance measurement
    • Diode measurement
    • Frequency and duty cycle test and other functions to meet basic electrical maintenance, electrical measurement, and electronic measurement applications

    Ergonomic and Rugged

    • Comfortable grip, only weighs 200g and easy to carry
    • Rugged enclosure and 1-meter drop test

    Fluke 107 Additional Features

    • Full-parameter automatic range test, which is convenient and quick to test; at the same time, it reduces the number of rotations of the wave plate and prolongs the life of the instrument.
    • 6000-word large screen LCD backlight display
    • Battery powered, automatic power save mode
    • Data retention feature makes it easier to read measurement results
    • Comes with SmartStrap™ intelligent magnetic multi-purpose lanyard

    Key safety features

    • Compliant with IEC61010-1 CATIII 600V overvoltage protection safety standard

    Fluke 107 Comes with Fluke TL75 Hard Point™ Test Lead Set

    • One pair (red, black) of comfort grip probes
    • 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
    • Recommended for general purpose measurements
    • CAT II 1000 V, 10 A rating
    • CAT IV 600 V, CAT III 1000 V only with protective cap

    Warranty, service plan

    • The Fluke 107 Palm-sized, CAT III Digital Multimeter has a one-year warranty.

    Data sheet

Included equipment:

TL75 Hard Point™ Test Lead Set

Two AAA Batteries (installed)

SmartStrap™ Intelligent Magnetic Multi-purpose Lanyard

Quantities limited at this price.


Fluke 115 True-RMS Multimeter

Fluke 115 True-RMS Multimeter

Fluke 115 True-RMS Multimeter

FREE UPS GROUND SHIPPING

With its simple operation, compact design and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. The Fluke 115 displays True RMS voltage and current readings with 600 count resolution, continuity and capacitance, making it perfect for quick verifications and field service use.  Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V Environments.

 

  • Large white LED backlight to work in poorly lit areas
  • Resistance and continuity
  • Frequency and capacitance
  • Maximum Voltage ac/dc 600V
  • 10A ac/dc current measurement (20 A overload for 30-seconds max)
  • Min/Max/Average to record signal fluctuations
  • CAT III 600 V safety rated

Safety conformance

All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.

 

Specifications
Maximum voltage between any terminal and earth ground 600 V
Surge protection 6 kV peak per IEC 61010-1 600 VCAT III, Pollution Degree 2
Display Digital: 6,000 counts, updates 4 per second
Bar graph 33 segments, updates 32 per second
Operating temperature -10 °C to 50 °C
Storage temperature -40 °C to 60 °C
Battery type 9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Batterylife 400 hours typical, without backlight
Accuracy Specifications
DC millivolts Range/Resolution 600.0 mV / 0.1 mV
Accuracy ± ([% of reading] [counts]): 0.5% 2
DC volts Range/Resolution 6.000 V / 0.001 V
60.00 V / 0.01 V
600.00 V / 0.1 V
Accuracy ± ([% of reading] [counts]): 0.5% 2
AC millivolts1 True RMS Range/Resolution 600.0 mV / 0.1 mV
Accuracy 1.0 % 3 (dc, 45 Hz to 500 Hz)
2.0 % 3 (500 Hz to 1 kHz)
AC volts1 True RMS Range/Resolution 6.000 V / 0.001 V
60.00 V / 0.01 V
600.0 V / 0.1 V
Accuracy 1.0 % 3 (dc, 45 Hz to 500 Hz)
2.0 % 3 (500 Hz to 1 kHz)
Continuity Range/Resolution 600 Ω / 1 Ω
Accuracy Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of
500 μs or longer.
Ohms Range/Resolution 600.0 Ω / 0.1 Ω
6.000 kΩ / 0.001 kΩ
60.00 kΩ / 0.01 kΩ
600.0 kΩ / 0.1 kΩ
6.000 MΩ / 0.001 MΩ
Accuracy 0.9 % 1
Range/Resolution 40.00 MΩ / 0.01 MΩ
Accuracy 5 % 2
Diode test Range/Resolution 2.00 V / 0.001 V
Accuracy 0.9% 2
Capacitance Range/Resolution 1000 nF / 1 nF
10.00 μF / 0.01 μF
100.0 μF / 0.1 μF
9999 μF / 1 μF
100 μF to 1000 μF
Accuracy 1.9% 2
Range/Resolution > 1000 μF
Accuracy 5% 20%
Lo-Z capacitance Range 1 nF to 500 μF
Accuracy 10% 2 typical
AC amps True RMS
(45 Hz to 500Hz)		 Range/Resolution 6.000 A / 0.001 A
10.00 A / 0.01 A
Accuracy 1.5% 3
20 A overload for 30-seconds max
DC amps Range/Resolution 6.000 A / 0.001 A
10.00 A / 0.01 A
Accuracy 1.0% 3
20 A overload for 30-seconds max
Hz (V or A input)2 Range/Resolution 99.99 Hz / 0.01 Hz
999.9 Hz / 0.01 Hz
9.999 kHz / 0.001 kHz
50 kHz / 0.01 kHz
Accuracy 0.1% 2
Notes:
¹ All AC voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V.
² Frequency is AC coupled, 5Hz to 30 kHz for AC voltage.
• Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
• Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current.
• Temperature Range/Resolution: -40 °F to 752 °F / 0.2 °F.
Mechanical & General Specifications
Size 167 x 84 x 46 mm (6.57″ x 3.31″ x 1.82″)
Weight 550 g
Warranty 3 years


Fluke 117 True-RMS Multimeter

Fluke 117 True-RMS Multimeter

Fluke 117 True-RMS Multimeter

FREE UPS GROUND SHIPPING 

The compact Fluke 117 true RMS digital multimeter is optimized to help you keep commercial buildings, hospitals and schools running right.

The advanced features of the Fluke 117 help you get the job done, quickly and safely. Integrated non-contact voltage detection helps you identify energized circuits. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 117 delivers true-rms ac voltage and current readings with 6000-count resolution. It provides Min/Max/Average readings and measures frequency and capacitance. The battery door is easy to access, so you and your Fluke 117 can stay on the job.

Fluke 117 multimeters are independently tested for safe use in CAT III 600V environments.

    • VoltAlert™ technology for non-contact voltage detection
    • AutoVolt automatic ac/dc voltage selection
    • Low input impedance: helps prevent false readings due to ghost voltage
    • Large white LED backlight to work in poorly lit areas
    • True-rms for accurate measurements on non-linear loads
    • Measures 10 A (20 A overload for 30-seconds)
    • Resistance, continuity, frequency and capacitance
    • Min/Max/Average with elapsed time to record signal fluctuations
    • Compact ergonomic design for one-handed operation
    • Compatible with optional magnetic hanger (ToolPak™) for hands free operation
    • CAT III 600 V safety rated
  • AutoVolt/LoZ
  • VoltAlert

Case: C90

 



Fluke 125B 40MHz Scopemeter

Fluke 125 40MHz Scopemeter

Fluke 125B 40MHz Scopemeter

FREE UPS GROUND SHIPPING

The Fluke 125B 40MHz Scopemeter: All the power of the 120-Series plus Industrial Bus Health Test capabilities and advanced power measurements on top.

The compact Fluke 125B 40MHz Scopemeter is the rugged solution for industrial troubleshooting and installation applications. Based on the Fluke 120 series, the 125 has all the capabilities of the 124 ScopeMeter extended with the capability to measure and analyze the signal quality on the common industrial buses.

The Fluke 125 ScopeMeter combines a 40MHz dual input digital storage oscillo-scope, two true-RMS digital multimeters and a dual input TrendPlot recorder all in a compact, battery powered instrument. Leave all other test tools behind, the Fluke 125 ScopeMeter is the only tool you’ll need.

  • Dual-input 40 MHz digital oscilloscope
  • Two 5,000 counts true-RMS digital multimeters
  • A dual-input TrendPlot recorder
  • Shielded test leads for oscilloscope, resistance and continuity measurements
  • 10:1 Voltage Probe included for high frequency measurements
  • 600 V CAT III safety certified
  • Up to 7 hours battery operation
  • Optically-isolated interface for PC connection
  • 3 year warranty on main instrument, 1 year on accessories

SOFTWARE NOT INCLUDED

125 Getting Started

 


Fluke 177 True RMS Digital Multimeter

Fluke 177 True RMS Digital Multimeter

Fluke 177 True RMS Digital Multimeter

FREE UPS GROUND SHIPPING

Electrician’s Dream!

With its precision, reliability and ease of use, the Fluke 177 True RMS Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.

  • True RMS voltage and current measurements
  • 0.09% basic accuracy
  • 6000 count resolution
  • Digital display with analog bargraph and backlight
  • Manual and automatic ranging
  • Display Hold and Auto Hold
  • Frequency and capacitance measurements
  • Resistance, continuity and diode measurements
  • Min-max-average recording
  • Smoothing mode allows filtering of rapidly changing inputs
  • Easy battery exchange without opening the case
  • Closed case calibration through front panel
  • Ergonomic case with integrated protective holster
  • EN61010-1 CAT III 1000V / CAT IV 600V
  • Measures twice as fast as other multimeters

175, 177 & 179 Users Manual

 


Fluke 179 True RMS Digital Multimeter

Fluke 179 True RMS Digital Multimeter

Fluke 179 True RMS Digital Multimeter

FREE UPS GROUND SHIPPING

I Want No Other Meter in My Toolkit

With its precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built-in temperature measurements.

Works When You Need It, Where You Need It

You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy and high places you work. Backed by a lifetime warranty, the Fluke 179 is independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments.

The Fluke 179 – Just One of Fluke’s Trusted Tools

Fluke builds the most trusted tools in the world, and that means more than just the Fluke 179. If you work with the HVAC equipment, need a small meter for small spaces, or work in the electrical installer’s and repairman’s world, check out the full family of Fluke digital multimeters at Kiesub Electronics.

The Fluke 179 True RMS Digital Multimeter is the industry standard for troubleshooting and repair of electrical and electronic systems.

  • True RMS voltage and current measurements
  • 0.09% basic accuracy
  • 6000 count resolution
  • Digital display with analog bargraph and backlight
  • Manual and automatic ranging
  • Display Hold and Auto Hold
  • Frequency and capacitance measurements
  • Resistance, continuity and diode measurements
  • Temperature measurements
  • Min-max-average recording
  • Smoothing mode allows filtering of rapidly changing inputs
  • Easy battery exchange without opening the case
  • Closed case calibration through front panel
  • Ergonomic case with integrated protective holster
  • EN61010-1 CAT III 1000V / CAT IV 600V
  • Measures twice as fast as other multimeters

175, 177 & 179 Users Manual



Fluke 1AC II A1 VoltAlert Electrical Tester

Fluke 1AC II A1 VoltAlert Electrical Tester

Fluke 1AC II A1 VoltAlert Electrical Tester

The pocket-sized voltage detector

The next generation Fluke 1AC II A1 VoltAlert Electrical Tester non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

  • Voltbeat™ technology and continuous self-test – so you always know it’s working
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Expanded range: 90 V AC to 1000 V AC
  • 20 V to 90 V AC control circuit model also available
  • Two-year warranty
  • Batteries included
  • On/Off Button
  • Audible/Silent
 


Fluke 302+ CAT III Digital Clamp Meter

FLUKE-302+

Fluke 302 CAT III Digital Clamp Meter

The Fluke 302 is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302 delivers reliable measurements time after time.

Fluke 302 Additional Features

  • The Fluke 302 CAT III Digital Clamp Meter is more compact, making the use of clamp-type ammeter more flexible and simpler
  • Measure AC current up to 400A
  • 30 mm large jaw
  • High accuracy of 1.8%
  • Backlit display
  • Two-year warranty

Fluke 302 Comes with Fluke TL75 Hard Point™ Test Lead Set

  • One pair (red, black) of comfort grip probes
  • 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
  • Recommended for general purpose measurements
  • CAT II 1000 V, 10 A rating
  • CAT IV 600 V, CAT III 1000 V only with protective cap

Fluke 302 Safety Features

  • Meets CAT IV 300V/CAT ||| 600V safety rating

Key features

  • AC current measurements up to 400 A, handling your everyday electrical maintenance needs
  • Comes with the TL75 Hard Point™ Test Lead Set offering the convenience of a test lead and probe in one unit with a variety of connections
  • Rugged, easy-to-use digital clamp meter with CAT IV 300 V/CAT III 600 V safety rating

Technical Specifications
AC current Range 400.0 A
Accuracy 1.8% ±5
AC voltage Range 400/600
Accuracy 1.5% ±5
DC voltage Range 400/600
Accuracy 1.5% ±5
DC mV range –
Resistance Range 4000 Ω
Accuracy 1% ±5
Continuity ≤ 70 Ω
Backlight display Yes
Data hold Yes
Size H x W x D (mm) 208 x 58.5 x 28
Jaw size 30 mm
Safety rating CAT III 600 V
Temperature 0 ~ 40 °C
Screen refresh rate > 2 times / sec.
Test leads TL75
Battery 2 AAA batteries
Warranty 2 years

Includes:

  • Fluke 302 CAT III Digital Clamp Meter
  • Fluke TL75 Hard Point™ Test Lead Set
  • 2 AAA batteries (installed)
  • 2-year warranty


Fluke 374 FC True-rms AC/DC Clamp Meter

Fluke 374 FC True-RMS AC/DC Clamp Meter

FREE UPS GROUND SHIPPING

The Fluke 374 FC AC/DC Clamp Meter offers advanced troubleshooting performance and is now part of the Fluke Connect family of wireless test tools.

The Fluke 374 FC directly replaces the Fluke 374 Clamp Meter.

Features:

  • Trend measurements and pinpoint intermittent faults by connecting your meter to your phone via Fluke Connect® Measurements app.
  • Transmit results wirelessly via Fluke Connect® Measurements app
  • Create and send reports right from the field
  • Stay safely away from the arc flash zone through Bluetooth connectivity to Apple and Android devices
  • Connect your meter to your smartphone with Fluke Connect Measurements.
  • Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks.
  • Record results directly to your phone and the Cloud.
  • Create and share reports from the field via email, or converse in real-time with ShareLive™ video calls.
  • Compatible with iFlex flexible current probe; use to expand the measurement range to 2500 A ac; provides access to large conductors in tight spaces.
  • Compatible with TPAK magnetic hanging strap.
  • Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.
  • CAT IV 600 V, CAT III 1000 V safety rating.
  • Three-year manufacturer warranty.
  • Soft carrying case.

374 FC/375 FC/376 FC Users Manual