Eclipse 902-335 4″ X 8″ SOLDERING SPONGES – 3 PCS

4″ X 8″ Soldering Sponges – 3 pcs. Can be cut to any size.

Eclipse CP-382 CABLE TIE GUN

This gun will do cable tie widths from 3/32″ – 3/16″ and thickness up to 1.6mm. It has an adjustable tension control and neatly cuts the ends of cable ties.

Eclipse DP-366P BIG BLUE DESOLDERING PUMP

Larger design
High suction force
Exposed plunger

Eclipse MA-016 ADJUSTABLE MAGNIFICATION HEADBAND/VISOR LIGHT

Combination lens for adjustable magnification level
Detachable LED light device
Adjustable tilt on LED light
Adjustable headband to fit any size

Eclipse MT-7063 POE & LAN CABLE TESTER

PoE Tester

Tests Ethernet network for power over Ethernet existence
Quickly detects the type of the Power Sourcing Equipment
Only for detecting Midspan/Endspan

LAN Cable Tester

Check the RJ11/RJ12/RJ45 pin to pin cable map
Checks for continuity, open, short and crossover wire pairs
Cable mapping up to 984 ft

Eclipse MT-7509 Visual Fault Locator for LC Fiber Connectors

Eclipse MT-7509 Visual Fault Locator for LC Connectors

The Eclipse MT-7509 Fiber Optic Laser Tester is a light source used to locate breaks and misconnections in fiber optic cables. It is an ideal instrument to find the broken or bent patch cords, especially in fiber identification among ribbon or bunched optic fiber pigtails during the installation, in which identifying fiber from end to end may be troublesome or time-consuming. It as a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

The MT-7509 projects a highly visible red light into a fiber optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. Equipped with a high-power, extra long-life, 635nm Class III A laser diode, it operates in a Continuous mode. Any breaks will be seen as a conspicuously glowing red light point.

Simple, versatile, and user-friendly design
Rugged, compact, and splash proof copper housing
Three operation modes available: “CW” (Continuous wave output), “Pulse” and “Off” modes
Continuous wave output mode (CW) for steady fault illumination
Pulse mode helps to locate faults under high ambient light conditions
Supports LC 1.25mm connectors
The button switch permits easy one handed operation
Handy, pocket pen design
2 AAA-size alkaline batteries provide 50 hours of continuous operation

Light Source Class III A Laser Diode
Central Wave Length 635nm/±10nm
Connector Interface 1.25mm; LC only
Peak Power Output > 0.5mW
Operating Temperature 0 ~ 40°C
Storage Temperature 20 ~ 60°C
Dimensions Length: 6″
Diameter: .5″
Batteries 2 AAA (Not included)

VFL

Eclipse PK-12012H Telecom Installers Kit

Free UPS ground shipping

This Telecom Installers Kit is a great starter kit for Telecom Installers! It comes with 10 of the most important tools all in a nice tool pouch to carry them all. This all-in-one kit is perfect for use by Alarm, Phone, Data, and other telecommunication Professionals.

Butt-Set Features:

Speakerphone for convenient hands free two-way conversations
Tone (DTMF) and Pulse operation
Can store up to 12 phone numbers in repertory dialer (Speed Dialing) with a maximum length of 16 digits
Phone numbers with 32 digits can be stored using 2 storage positions
Last number redial capability
PBX Pause button inserts a PBX Pause in Stored Buttons
High Impedance Coupling permits monitoring without disruption to conversation or signaling
Mute Switch for Speakerphone microphone provides privacy option
Continuous LED polarity indicators
Battery saving feature turns off speakers after five minutes of inactivity
Three level volume control
Audible electronic ringer
Angled Bed of Nail Test Leads
Durable Metal Hanger
Rests easily on shoulder

Kit Includes:
-4 Screwdrivers Philips #2×100, #2×40 / Flathead 5×75, 6×100
-Side Side Cutters
-Needle-Nose Pliers
-Modular Crimping Tool 6P/8P
-Multi-Modular Cable Tester
-Punch down Tool w/ 110 Blade
-Butt Set w/ Speakerphone
-Multi-purpose Tool Pouch

Eclipse SB-2419 COMPARTMENT STORAGE BOX

9.4″ x 7.6″ x 1.7″

Made from high impact resistant polypropylene
10 Fixed compartments inside
Provides a tight seal around the tops of the compartments which prevents small components from being mixed while closed
Ideal for organizing small parts, screws, nuts, bolts, arts or stationery

Eclipse SD-9314 17 PC TOOL KIT FOR APPLE PRODUCTS

17 pc Tool Kit is a professional, portable and complete kit. Perfect fit for Apple products, also allows opening of many other devices as well without any damage.

17 pc Tool Kit complete all necessary screwdriver bits and tools for many Apple Product Repairs
12pcs bits made from high quality Cr-Mo-V Steel
Polyoxymethylene (POM) opening levers for leverage to open the housing easily and access the inside parts safely
Miniature Suction Cup for removing Apple touch screens without leaving marks on device.
Comes with a prying paddle for opening case without scratching the cover
Excellent solution for opening Apple products or other devices as well, including cell phones and other small electronic devices.

Eclipse TZ-205N TWEEZER, ESD-SAFE, SOFT-GRIP, FINE TIP

ESD safe, soft touch handle provides a secure hold and increases operation comfort.
Ideal for the holding and bending required in fine work applications.
Made of high-quality carbon steel, great for repeated use.