Eclipse 300-072 LUNAR CRIMPER FOR RED AND BLUE INSULATED FLAG TERMINALS AWG 22-14

Application:
Red and Blue Insulated Flag Terminals

Crimp Size:
AWG 22-18/ 16-14 DIN 0.5-1.0/ 1.5-2.5mm

Eclipse 300-016 WIRE FERRULE CRIMPER

Eclipse 300-016 Wire Ferrule Crimper

Eclipse 300-011 IDC CONNECTORS CRIMPER FOR FLAT CABLE

DC connectors height: 6mm~27.5mm width(max): 55mm
9.4 in. overall length

Eclipse 200-091 SELF-ADJUSTING WIRE STRIPPING TOOL

Sturdy ABS & low carbon steel body.
Application: Stripping flexible cable from 0.2 ~4mm2 (AWG 24-12).
Overall length: 6.8 in.

Eclipse 200-080 2-IN-1 CUTTER STRIPPER

Strips: 26-14 AWG
Great for PC board and cable assembly
Overall length: 5″

Eclipse 200-072 AUTOMATIC WIRE STRIPPER (AWG 24-10)

Insulated terminals 22-10 AWG
Non-insulated terminals 22-10 AWG
Auto ignition terminals
Built-in cutter
Adjustable stopper
Micro adjustment
Strips AWG 24-10
Crimps lugs and terminals

Eclipse 200-015 CABLE CUTTER

Cuts wire and cable up to 0.40″ diameter
Coaxial cable up to RG-9/U
Spring loaded
For copper and aluminum wire only

Eclipse 100-022 SNAP RING PLIER SET

Straight, 90 degree and 45 degree heads
Works with both inner and outer style clips
6 in. overall length

Eclipse 900-037 Helping Hands with Magnifier Lens

This table top soldering aid features a weighted base, magnifying lens, and alligator style clips for holding your project in place. Multiple points of adjustment for ease of use.

2.6 inch glass lens magnifier

2 fully adjustable arms with alligator clips

Heavy duty base

Lens Material: Glass
Magnification 8D/3X
Base Size: 52x52x55mm
Pro’s Kit 608-391A

Eclipse MT-7509 Visual Fault Locator for LC Fiber Connectors

Eclipse MT-7509 Visual Fault Locator for LC Connectors

The Eclipse MT-7509 Fiber Optic Laser Tester is a light source used to locate breaks and misconnections in fiber optic cables. It is an ideal instrument to find the broken or bent patch cords, especially in fiber identification among ribbon or bunched optic fiber pigtails during the installation, in which identifying fiber from end to end may be troublesome or time-consuming. It as a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

The MT-7509 projects a highly visible red light into a fiber optic cable. The operator simply looks at the length of cable and where light is seen, there is a break. Equipped with a high-power, extra long-life, 635nm Class III A laser diode, it operates in a Continuous mode. Any breaks will be seen as a conspicuously glowing red light point.

Simple, versatile, and user-friendly design
Rugged, compact, and splash proof copper housing
Three operation modes available: “CW” (Continuous wave output), “Pulse” and “Off” modes
Continuous wave output mode (CW) for steady fault illumination
Pulse mode helps to locate faults under high ambient light conditions
Supports LC 1.25mm connectors
The button switch permits easy one handed operation
Handy, pocket pen design
2 AAA-size alkaline batteries provide 50 hours of continuous operation

Light Source Class III A Laser Diode
Central Wave Length 635nm/±10nm
Connector Interface 1.25mm; LC only
Peak Power Output > 0.5mW
Operating Temperature 0 ~ 40°C
Storage Temperature 20 ~ 60°C
Dimensions Length: 6″
Diameter: .5″
Batteries 2 AAA (Not included)

VFL

Eclipse 300-167 Fiber Optic Crimp Tool

Eclipse 300-167 Fiber Optic Crimp Tool

The Pro’sKit Fiber Optic Crimp Tool Lunar Series is designed for use with FC,SC,ST,LC, SMA & MT-RJ fiber optic connectors

HEX .139”, .151”, .178”, ROUND .134”, .190”

Eclipse 200-047 Nick-Free Fiber Optic Stripper

Eclipse 200-047 Nick-Free Fiber Optic Stripper

TheEclipse 200-047 blades ensure that these strippers cut nick free. The Screw make it possible to adjust the depth of your cut and the spring loaded handles lessen the strain on the hand.

Nick-free Fiber Optic Stripper

Nick-Free
Screw for fine adjustments
Spring loaded handles
Strips 900 um buffer
Strips 2-3 mm jacket
Strips 125 um Acrylate

Eclipse 900-004 Mini-Desolder Pump

Eclipse 900-004 Mini-Desolder Pump

Mini-Solder Remover, mini-tip, anti-static Smaller design and protective shield around plunger.

Eclipse PK-12012H Telecom Installers Kit

Free UPS ground shipping

This Telecom Installers Kit is a great starter kit for Telecom Installers! It comes with 10 of the most important tools all in a nice tool pouch to carry them all. This all-in-one kit is perfect for use by Alarm, Phone, Data, and other telecommunication Professionals.

Butt-Set Features:

Speakerphone for convenient hands free two-way conversations
Tone (DTMF) and Pulse operation
Can store up to 12 phone numbers in repertory dialer (Speed Dialing) with a maximum length of 16 digits
Phone numbers with 32 digits can be stored using 2 storage positions
Last number redial capability
PBX Pause button inserts a PBX Pause in Stored Buttons
High Impedance Coupling permits monitoring without disruption to conversation or signaling
Mute Switch for Speakerphone microphone provides privacy option
Continuous LED polarity indicators
Battery saving feature turns off speakers after five minutes of inactivity
Three level volume control
Audible electronic ringer
Angled Bed of Nail Test Leads
Durable Metal Hanger
Rests easily on shoulder

Kit Includes:
-4 Screwdrivers Philips #2×100, #2×40 / Flathead 5×75, 6×100
-Side Side Cutters
-Needle-Nose Pliers
-Modular Crimping Tool 6P/8P
-Multi-Modular Cable Tester
-Punch down Tool w/ 110 Blade
-Butt Set w/ Speakerphone
-Multi-purpose Tool Pouch

Eclipse 900-043 Utility Compartment Box

Get organized! Store parts, components, screws and other hardware on both sides. Made of high impact plastic.

Utility compartment box with a two-sided lid
This box is used to store small hand tool or tool compartments
Contains plastic box with dividers
The box measures 6.5 inches X 3.75 inches X 1.75 inches in size

Eclipse 902-186N Visual Fault Locator for SC/ST Connectors

Eclipse 902-186N Fiber Optic Cable Tester

Eclipse 902-186N Visual Fault Locator for SC/ST Connectors

Eclipse Visual Fault Locator

It features a 635nm Class III A laser source with an output power of 5mW and it can be used on SM (single mode) fibers.

Features Battery-powered, low-cost, basic fiber test tool
Locates breaks, faulty splices and poorly crimped components or connections of 62.5/125u 0.9mm universal connectors
Accepts ST, SC, FC/PC optical connectors
Continuous outputs of high 635nm/5mW Class III A laser diode power and tests over 4km (2.5mi)
Slim, pocket-sized, pen-type design
Includes acrylic carrying case and two 1.5V AAA batteries
Rugged metal housing

VFL

Eclipse 900-258 IC Extractor

IC Extractor

Stainless Steel Construction for Removing Dual In-Line IC Packages
The Grip is made of an Insulating Vinyl

Eclipse 900-116 Static Protection Mat W/Ground Strap 20″x 24″

Anti-Static Mat w/Ground Strap 20″ x 24″

A one megohm resistor is attached to the middle of the grounding wire for optimum static protection.
Special durability of antistatic treatment.
Thickness : 3mm