Eclipse 100-008 Crimping Pliers

UY, UG, & UR Connectors
Built in Stop to Protect against Overcrimping
Side Cutter Insulated Handles

Eclipse 100-022 SNAP RING PLIER SET

Straight, 90 degree and 45 degree heads
Works with both inner and outer style clips
6 in. overall length

Eclipse 200-007 Adjustable Wire Cutter/Stripper

Eclipse 200-007 Adjustable Wire Cutter/Stripper:

30-10 AWG Adjustable Cutter/Stripper. By using a screwdriver to adjust, the high carbon steel, precision cutting surface will cut or strip wire from AWG 10 to AWG 30.

Adjustable With a Screwdriver
High Carbon Steel
Precision Ground Cutting Surface

Eclipse 200-015 CABLE CUTTER

Cuts wire and cable up to 0.40″ diameter
Coaxial cable up to RG-9/U
Spring loaded
For copper and aluminum wire only

Eclipse 200-046 Round Cable Cutter

Eclipse 200-046 Round Cable Cutter:

For large wires up to 2/0
Up to 100 Pair Cable
Return Spring
Insulated Handles

Eclipse 200-047 Nick-Free Fiber Optic Stripper

Eclipse 200-047 Nick-Free Fiber Optic Stripper

TheEclipse 200-047 blades ensure that these strippers cut nick free. The Screw make it possible to adjust the depth of your cut and the spring loaded handles lessen the strain on the hand.

Nick-free Fiber Optic Stripper

Nick-Free
Screw for fine adjustments
Spring loaded handles
Strips 900 um buffer
Strips 2-3 mm jacket
Strips 125 um Acrylate

Eclipse 200-072 AUTOMATIC WIRE STRIPPER (AWG 24-10)

Insulated terminals 22-10 AWG
Non-insulated terminals 22-10 AWG
Auto ignition terminals
Built-in cutter
Adjustable stopper
Micro adjustment
Strips AWG 24-10
Crimps lugs and terminals

Eclipse 200-080 2-IN-1 CUTTER STRIPPER

Strips: 26-14 AWG
Great for PC board and cable assembly
Overall length: 5″

Eclipse 200-091 SELF-ADJUSTING WIRE STRIPPING TOOL

Sturdy ABS & low carbon steel body.
Application: Stripping flexible cable from 0.2 ~4mm2 (AWG 24-12).
Overall length: 6.8 in.

Eclipse 300-011 IDC CONNECTORS CRIMPER FOR FLAT CABLE

DC connectors height: 6mm~27.5mm width(max): 55mm
9.4 in. overall length

Eclipse 300-016 WIRE FERRULE CRIMPER

Eclipse 300-016 Wire Ferrule Crimper

Eclipse 300-035 Multi-Purpose Crimper

Eclipse 300-035 Multi-Purpose Crimper:

Crimps a Variety of Open Barrel Contacts
Including Solderless Lugs and D-Sub Contacts
AWG 28-14

Eclipse 300-072 LUNAR CRIMPER FOR RED AND BLUE INSULATED FLAG TERMINALS AWG 22-14

Application:
Red and Blue Insulated Flag Terminals

Crimp Size:
AWG 22-18/ 16-14 DIN 0.5-1.0/ 1.5-2.5mm

Eclipse 300-107 HEAVY DUTY CRIMPING TOOL FOR AWG 8 TO 250 MCM

Insulated and non insulated cable lugs
Heavy Duty tinned terminals
Battery and welding cable, building wiring and terminal lugs
8, 6, 4, 2, 1/0, 2/0, 3/0, 250 MCM

Adjustment knob for crimp depth
Two capacity plates – aluminum and copper
Lightweight and easy to operate
Overall length: 22.4″

Eclipse 300-166 LUNAR CRIMPER FOR MC4 SOLAR PANEL CONTACTS

Application: Multi-Contact (MC4) 4mm Solar Contacts

Crimp Size:
AWG 14/12/10
DIN 2.5/4.0/6.0mm^2

Eclipse 300-167 Fiber Optic Crimp Tool

Eclipse 300-167 Fiber Optic Crimp Tool

The Pro’sKit Fiber Optic Crimp Tool Lunar Series is designed for use with FC,SC,ST,LC, SMA & MT-RJ fiber optic connectors

HEX .139”, .151”, .178”, ROUND .134”, .190”

Eclipse 300-173 CRIMPRO CRIMPER FOR AMPHENOL, BELDEN 7810A, 9913, 9914, LMR400

Application:
Crimps Amphenol, Belden 7810A, 9913, 9914, LMR 400

Crimp Size:
HEX .429″, .118″
HEx 10.89, 3.00mm

Eclipse 400-029 RECEPTACLE TESTER – STANDARD OUTLETS

The Eclipse Tools Receptacle Tester for Standard Outlets tests for correct wiring. It can be plugged in to check outlet polarity, and a light pattern is displayed to indicate status. This is a UL approved and RoHS compliant tester.

Correct Wiring
Open Ground? Reverse Polarity
Open Hot? Open Neutral
Hot on Neutral
Hot and Ground Reversed with Open Hot
Works on 120VAC circuits
Light pattern indicates status
UL approved
RoHS compliant