APC BE850G2 850 VA 450 Watts 9 Outlets,2 USB Back-UPS

BE850G2

APC BE850G2 850 VA 450 Watts 9 Outlets,2 USB Back-UPS

Reliable Back-UPS with more power, extra outlets and USB charging ports

When the power goes out, an APC battery backup with surge protection provides guaranteed power for computers, external hard-drives and other electronics, including your wireless router so you can maintain a network connection for your IoT devices when you need it most! Ideal for full-sized computers and monitors, the Back-UPS BE850G2 offers 450W of power, 9 total outlets, plus two USB Charging ports (2.4A shared).

Battery Failure Notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
LED Status Indicators
Quickly understand unit and power status with visual indicators.
Resettable Circuit Breaker
Easy recovery from overloads; no need to replace a fuse.
Battery-Protected and Surge-Only Outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Cold-Start Capable
Provides temporary battery power when the utility power is out.
Hot-Swappable Batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected Battery Notification
Warns when a battery is not available to provide backup power.
Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.
Automatic Self-Test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Audible Alarms
Provides notification of changing utility power and UPS conditions
User-Replaceable Batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
USB Connectivity
Provides management of the UPS via a USB port (not available on all models).
Transformer-Block Spaced Outlets
Protect equipment with input transformer blocks without blocking access to other receptacles. Intelligent battery management
Safety-Agency Approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Lifetime Data Recovery Warranty
Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
Battery Replacement Without Tools
Allows quick, easy battery replacement.
Lightning and Surge Protection
Protection from surges, spikes and even lightning is guaranteed!

Output

Max Configurable Power (Watts)

450 Watts / 850VA
Output Frequency (sync to mains)

50/60 Hz /- 3 Hz Sync to mains
Topology

Standby
Waveform type

Stepped approximation to a sinewave
Transfer Time

6 ms typical : 10 ms maximum

Input

Input frequency

50/60 Hz /- 3 Hz Auto-sensing
Input voltage range for main operations

92 – 139V
Number of Power Cords

1

Batteries & Runtime

Battery type

Lead-acid battery
Typical recharge time

8hour(s)
Replacement Battery

RBC17
Expected Battery Life (years)

2 – 5
Battery Charge Power (Watts)

13 Watts
Battery Volt-Amp-Hour Capacity

102
Runtime

View Runtime Graph
Efficiency

View Efficiency Graph

Communications & Management

Interface Port(s)

USB
Control panel

LED status display with on line : on battery : replace battery and building wiring fault
Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating

354Joules

Physical

Maximum Height

5.47inches (139MM, 13.9CM)
Maximum Width

12.87inches (327MM, 32.7CM)
Maximum Depth

4.13inches (105MM, 10.5CM)
Net Weight

9.04lbs. (4.1KG)
Shipping weight

9.7lbs. (4.4KG)
Shipping Height

7.72inches (196MM, 19.6CM)
Shipping Width

16.38inches (416MM, 41.6CM)
Shipping Depth

6.61inches (168MM, 16.8CM)
Color

Black
 

 

 



APC BE600M1 Back-UPS, 600VA 7 Outlets 1 USB Charging Port

BE600M1

APC BE600M1 Back-UPS, 600VA 7 Outlets 1 USB Charging Port

Reliable battery backup and surge protection

When the power goes out, the BE600M1 provides guaranteed power for computers, external hard-drives and other electronics, including your wireless router so you can maintain a network connection for your IoT devices when you need it most! Ideal for the home and home offices, the Back-UPS BE600M1 offers plenty of power and outlets, plus a 1.5A USB Charging port.

Output

Max Configurable Power (Watts)

330 Watts / 600VA

Output Frequency (sync to mains)

50/60 Hz /- 3 Hz Sync to mains

Topology

Standby

Waveform type

Stepped approximation to a sinewave

Transfer Time

6 ms typical : 10 ms maximum

Input

Input frequency

50/60 Hz /- 3 Hz Auto-sensing

Input voltage range for main operations

92 – 139V

Batteries & Runtime

Battery type

Lead-acid battery

Typical recharge time

10hour(s)

Replacement Battery

APCRBC154

Expected Battery Life (years)

3 – 5

Battery Charge Power (Watts)

7 Watts

Battery Volt-Amp-Hour Capacity

78

Runtime

View Runtime Graph

Efficiency

View Efficiency Graph

Communications & Management

Interface Port(s)

USB

Control panel

LED status display with on line : on battery : replace battery and overload indicators

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating

490Joules

Filtering

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

Maximum Height

5.47inches (139MM, 13.9CM)

Maximum Width

10.79inches (274MM, 27.4CM)

Maximum Depth

4.13inches (105MM, 10.5CM)

Net Weight

7.69lbs. (3.49KG)

Shipping weight

8.4lbs. (3.81KG)

Shipping Height

7.72inches (196MM, 19.6CM)

Shipping Width

14.29inches (363MM, 36.3CM)

Shipping Depth

6.61inches (168MM, 16.8CM)

Environmental

Operating Temperature

32 – 104 °F (0 – 40 °C)

Operating Relative Humidity

0 – 90 %

Operating Elevation

0 – 10000ft (0 – 3048meters)

Storage Temperature

-15 – 45 °C

Storage Relative Humidity

0 – 95 %

Storage Elevation

0 – 50000ft (0 – 15240meters)

Audible noise at 1 meter from surface of unit

35.0dBA

Online thermal dissipation

16.0BTU/hr

Conformance

Approvals

California Energy Commission (CEC), cTUVus, FCC part 15 class B, NOM, UL 1778

Equipment protection policy

Lifetime : $75000

Standard warranty

3 years repair or replace


APC BE425M Back-UPS, 6 Outlets 425VA 120V

BE425M

APC BE425M Back-UPS, 6 Outlets 425VA 120V

Battery Backup & Surge Protector for Electronics and Computers

For smaller electronics, the BE425M provides peace of mind when the power goes out. Ideal for keeping your internet router running when the rest of your home loses power.

Output

Max Configurable Power (Watts)

255 Watts / 425VA
Output Frequency (sync to mains)

50/60 Hz /- 3 Hz Sync to mains
Topology

Standby
Waveform type

Square wave
Transfer Time

6 ms typical : 10 ms maximum

Input

Input frequency

50/60 Hz /- 3 Hz Auto-sensing
Input voltage range for main operations

88 – 139V
Number of Power Cords

1

Batteries & Runtime

Battery type

Lead-acid battery
Typical recharge time

8hour(s)
Expected Battery Life (years)

3 – 5
Battery Charge Power (Watts)

6 Watts
Runtime

View Runtime Graph
Efficiency

View Efficiency Graph

Communications & Management

Control panel

LED Status display with on line : on battery
Audible Alarm

Alarm when on battery : distinctive low battery alarm

Surge Protection and Filtering

Surge energy rating

180Joules

Physical

Maximum Height

5.52inches (140MM, 14.02CM)
Maximum Width

9.98inches (254MM, 25.35CM)
Maximum Depth

4.13inches (105MM, 10.5CM)
Net Weight

5.73lbs. (2.6KG)
Shipping weight

6.61lbs. (3.0KG)
Shipping Height

8.66inches (220MM, 22.0CM)
Shipping Width

12.4inches (315MM, 31.5CM)
Shipping Depth

5.51inches (140MM, 14.0CM)
Color

Black

Environmental

Operating Temperature

32 – 104 °F (0 – 40 °C)
Operating Relative Humidity

0 – 95 %
Operating Elevation

0 – 10000ft (0 – 3048meters)
Storage Temperature

-20 – 50 °C
Storage Relative Humidity

0 – 95 %
Storage Elevation

0 – 50000ft (0 – 15240meters)
Audible noise at 1 meter from surface of unit

40.0dBA

Conformance

Approvals

California Energy Commission (CEC), cTUVus, FCC part 15 class B
Equipment protection policy

Lifetime : $75000
Standard warranty

3 years repair or replace


APC BR1500G Battery Back Up Power Saving Back-UPS 1500VA

APC BR1500G Power Saving Back-UPS 1500VA

APC BR1500G Power Saving Back-UPS 1500VA

APC Back-UPS Pro, 865 Watts / 1500 VA,Input 120V / Output 120V, Extended runtime model
The Back-UPS Pro family offers guaranteed power protection for high performance computer systems, routers/modems, external storage devices, game consoles and other electronics in your home or business. Models supply abundant battery backup during outages and stabilize unsafe voltage levels. They provide protection from damaging surges and spikes, and allow the use of management software so you get the most out of your unit. Premium features of this family include Automatic Voltage Regulation (AVR), an LCD display, and energy saving functions that reduce electricity use. Together with the rest of the Back-UPS Pro’s standard features, they are the perfect choice to protect your data and keep your system available.

Includes: CD with software, USB cable, User Manual

  • Output power capacity: 1,500 VA
  • Output power capacity: 865 Watts
  • Output Connections:(5) NEMA 5-15R (Surge Protection) , (5) NEMA 5-15R (Battery Backup)
  • Typical backup time at half load: 13 min (432.5 Watts)
  • Typical backup time at full load: 3 minutes (865 Watts)
  • Green mode – Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Audible alarms – Provide notification of changing flywheel conditions
  • Battery failure notification – Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Power-saving outlets – Automatically cuts power to idle equipment to conserve electricity.
  • Resettable circuit breaker – Easy recovery from overloads; no need to replace a fuse.
  • Battery-protected and surge-only outlets – Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
  • Cold-start capable – Provides temporary battery power when the utility power is out.
  • Serial Connectivity – Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
  • Hot-swappable batteries – Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Disconnected battery notification – Warns when a battery is not available to provide backup power.
  • Dataline Surge Protection – Provides protection of connected equipment from power surges on the data lines.
  • Automatic self-test – Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Adjustable voltage-transfer points – Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Adjustable voltage sensitivity – Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Audible alarms – Provides notification of changing utility power and UPS conditions.
  • User-replaceable batteries – Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • USB connectivity – Provides management of the UPS via a USB port (not available on all models).
  • Serial Connectivity – Provides management of the UPS via a serial port.
  • Transformer-block spaced outlets – Protect equipment with input transformer blocks without blocking access to other receptacles.
  • Boost and Trim Automatic Voltage Regulation (AVR) – Gives higher application availability by correcting low and high voltage conditions without using the battery.
  • Intelligent battery management – Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Safety-agency approved – Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Lifetime data recovery warranty – Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
  • Building Wiring Fault Indicator – This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Adjustable voltage sensitivity – Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.
  • Battery replacement without tools – Allows quick, easy battery replacement.
  • LCD graphics display – Text and mimic diagrams that display modes of operation, system parameters and alarms.